







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in San Ramon, CA
We provide independent CGI service across San Ramon, and the one thing that makes our work here different is this: almost every CGI kitchen we touch is a rip-and-replace inside an occupied 1970s-90s subdivision home, not a new-construction install. That changes the sequencing, the dust control, and the permit path. CGI cabinets turn up in a large share of San Ramon’s original tract kitchens, and we’ve worked on enough of them to know the box construction, hinge hardware and finish quirks without being tied to the factory. Call (888) 426-8719 for a free estimate.
Why San Ramon Residents Choose Us for CGI Service

We’re independent specialists. Penhallow Remodeling Sunnyvale is not affiliated with or authorized by CGI, and that independence is the point: our value is pattern recognition across hundreds of these kitchens, not a brand badge. When a CGI door face is peeling or a sink base has swelled, we’ve usually seen the same failure a dozen times over in the Twin Creeks and Canyon Creek subdivisions.
Our technicians have up to 22 years of experience, all background-checked and arriving in uniform. We work on CGI plywood-box and particleboard-box cabinet construction, the maple and oak painted and stained finishes common in 1980s-90s East Bay builds, and the thermofoil and laminate-front bath vanity lines. We match OEM CGI doors, hinges and drawer hardware when a line is still supported. Where OEM parts are discontinued, we fit quality aftermarket soft-close hinges and slides. Every homeowner gets a written price before any work starts, backed by our 365-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Solve in San Ramon
- Thermofoil and laminate door faces that delaminate and peel at the edges. Years of hot inland-summer kitchen heat plus steam from a nearby bath break down the adhesive bond. Once the edge lifts, moisture gets behind the face and the peel accelerates. We reface or replace the doors depending on how far the damage has run.
- Particleboard box swelling and hinge screw pull-out. This shows up around sink bases and dishwashers where aging original plumbing has leaked slowly for years. The screw holes go soft, the hinge drops, and the door sags. We correct the leak first, then repair or replace the box.
- Finish fade, yellowing and checking on cabinet faces. San Ramon’s sunny afternoons hit west-facing kitchen light hard. Painted and stained finishes that sit in that exposure check and yellow over time. A reface in a finish rated for UV exposure solves it.
- Out-of-square boxes and sagging shelves. In older CGI runs, the original install was shimmed to a settling wood-frame wall. When the wall moves, the cabinet rack goes out of square and the doors stop closing cleanly. We re-level and re-shim the run before refacing.
- Original 1980s layouts that no longer fit the room. Sometimes the boxes are sound but the layout is the problem: no island, a blocked work triangle, a cabinet run that fights the window. That’s a replace-and-redesign job, not a reface.
CGI Service in San Ramon: What Local Conditions Mean for Your Equipment
Here’s the fact that shapes CGI work in San Ramon more than anything else: the city is essentially built out, with almost no remaining greenfield land. Construction here is dominated by tear-down rebuilds, second-story and ADU additions, and remodels of the 1970s-90s subdivisions rather than new tract development. For CGI cabinet owners, that means your kitchen was likely installed when the house went up and has never been touched since. Every job runs through San Ramon’s own planning and permitting department and, in the planned communities, through HOA architectural review, not county-only approval. In the Windemere and Gale Ranch areas, that HOA architectural-review sign-off often has to be secured alongside the city permit before demolition starts. So the sequencing matters: we don’t pull a cabinet until both approvals are in hand. That’s the difference between a clean reface and a job that gets stopped mid-tear-out.
CGI Models & Products We Service in San Ramon
We cover CGI semi-custom wood-frame kitchen cabinet lines in maple and oak, both painted and stained, and the thermofoil and laminate-front bath vanity lines common in San Ramon’s planned-community homes. We also work on CGI’s plywood-box and particleboard-box construction used in production tract kitchens.
Parts sourcing depends on the line. Where OEM CGI doors, hinges and drawer hardware are still supported, we order them to match, so a refaced cabinet keeps its original look. Where OEM parts are discontinued, we go to quality aftermarket soft-close hardware, because the hardware, not the box, is usually what fails. We don’t claim local stock; parts are sourced per job once we’ve confirmed the line and the damage.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in San Ramon

Every CGI job here starts with a written price before any work begins. Here’s what typical San Ramon projects run:
| Service | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives the number up or down: whether the boxes are sound enough to reface or have to be replaced, how much water damage sits in the sink base, the cabinet line you choose, and the countertop material. A free estimate includes measuring the run, checking the boxes for swelling and square, and confirming the permit and HOA review path. Call (888) 426-8719 to schedule yours.
Serving San Ramon, CA – Our Local Coverage Area
We serve San Ramon and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Construction in San Ramon
Often, yes. If the boxes are square and dry, refacing with new doors and drawer fronts plus soft-close hardware is a solid option. The call comes down to the sink base and any water-swollen particleboard; if the box has gone soft, that section gets replaced rather than refaced. Call (888) 426-8719 for an exact quote – estimates are free.
In most cases, yes. Those planned communities require HOA architectural-review sign-off alongside the city permit before demolition starts. We sequence the tear-out only after both approvals are in hand, so the job doesn’t stall mid-way. Call (888) 426-8719 and we’ll walk you through what your specific HOA needs.
Heat and steam break down the adhesive that bonds thermofoil to the door core, and once the edge lifts, moisture gets behind the face and the peel spreads. San Ramon’s hot dry summers and nearby-bath steam speed it up. Refacing or replacing the affected doors solves it; we don’t just glue the edge back down. Call (888) 426-8719 to schedule a look.
Usually, yes, if the boxes are sound and the run is level. Stone adds weight, so we check the box construction and the shim job under it before setting anything on top. Where the boxes are sagging or out of square, we correct that first. Call (888) 426-8719 for a free estimate.
A full kitchen remodel here runs $14,000 – $45,000, cabinet installation alone sits at $4,000 – $13,000, and countertop installation adds $2,000 – $6,500. A reface-and-repair job lands lower than a full replace. Call (888) 426-8719 for an exact quote – estimates are free.
Service Areas Near San Ramon
We also serve homeowners in Dublin and Pleasanton in the Tri-Valley, along with Fremont, Milpitas, and the broader San Ramon service area. If your CGI kitchen or bath needs work and you’re nearby, we cover it. For the full picture of what we do on this brand, see our CGI service page.
Book Your CGI Service in San Ramon Today
Call (888) 426-8719 for a free estimate on your CGI kitchen or bath project in San Ramon. A live person answers 24/7, you get a written price before any work starts, and every job carries our 365-Day Done Right Promise. We’ll confirm your permit and HOA path, measure the run, and give you a real number.
Written by the team at Penhallow Remodeling Sunnyvale.












