







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Sunnyvale Homeowners Choose CGI Construction
We provide independent CGI construction service in Sunnyvale, and what sets our CGI work apart is cabinet-specific depth: hinge and glide replacement with OEM-fit hardware, thermofoil door replacement, refacing that matches existing door profiles, and countertop installation built around how CGI boxes actually carry load. We’re an independent CGI service provider, not affiliated with or authorized by the manufacturer. That independence is the point. We work on the fit, alignment and moisture problems that decide whether CGI cabinetry survives a Sunnyvale kitchen. Call (888) 426-8719 for a free estimate.
Key Takeaways
- We service and install CGI cabinetry lines including ProCraft Shaker, Euro Flat-Panel, Raised-Panel Traditional and Thermofoil Slab.
- We are independent of CGI and do not carry manufacturer authorization or warranty endorsement.
- Every job gets a written price before work starts and the 365-Day Done Right Promise in writing.
- Our technicians have up to 22 years of experience with cabinet installation, refacing and countertop work.
Why Trust Penhallow Remodeling Sunnyvale for Your CGI Construction?

Cabinet work is unforgiving of small errors. A hinge drilled four millimeters off center pulls the door out of plane, and every door down the run shows it. Our technicians have installed and repaired enough CGI cabinetry to know where those tolerances bite: the 32mm system holes on Euro Flat-Panel boxes, the overlay spacing on ProCraft Shaker doors, the way a Thermofoil Slab front sits against a dishwasher panel that’s been swollen by steam for two winters.
That familiarity shapes how we buy parts. We source CGI OEM hinges, glides and touch-up kits where direct fit matters, and we’ll tell you plainly when a quality aftermarket soft-close hinge does the job for less. Warranty-safe practice means we don’t drill new holes in a door face to correct an alignment problem that belongs at the hinge plate. It also means we document what we replaced and why, so an owner has a paper trail if a separate manufacturer warranty question ever comes up.
Every Sunnyvale job runs under the Kingswell Guarantee: a written price before any work starts, a real arrival window, a clean site, and a written guarantee on the finish work. Background-checked, uniformed technicians show up on every visit. A live person answers the phone around the clock, so you’re not leaving a message and hoping.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Fix in Sunnyvale
These are the CGI failures we see most often in Sunnyvale kitchens, and each one has a cause worth understanding before you spend money on a fix.
- Loose or failed soft-close hinges on ProCraft Shaker doors. Soft-close mechanisms carry a small nitrogen-charged damper that wears out after a few thousand open-close cycles, and the hinge screws themselves work loose in particleboard when a door gets slammed repeatedly. The door then hangs crooked or drifts shut on its own. We replace the hinge with an OEM-compatible unit and, where the screw holes have wallowed out, install proper inserts rather than over-sizing the screw.
- Thermofoil door faces peeling or bubbling near the range and dishwasher. CGI Thermofoil Slab fronts are a vinyl film bonded to a substrate. Heat and steam from an oven door or a dishwasher vent break down the adhesive at the edges, and once a corner lifts, moisture gets behind the film and the peel spreads. This is the single most common CGI cosmetic failure we’re called about in Sunnyvale, and it’s fixable without replacing the box.
- Swollen particleboard at sink bases and dishwasher openings. CGI cabinet boxes use a particleboard core, which is dimensionally stable until water reaches the raw edge. A slow supply-line drip or a dishwasher leak wicks into the base and the panel swells, pushing joints apart and jamming drawers. By the time it’s visible, the damage is usually a season old. We check moisture content at the base before recommending any fix.
- Drawer glide alignment drifting on wide CGI drawer stacks. Wide, deep drawers put more torsional load on a side-mount glide than a narrow one, and the rear mounting bracket gradually shifts. The drawer starts rubbing on one side, gaps go uneven, and the glide eventually fails. Re-aligning is straightforward; replacing the glide pair is sometimes the honest answer.
- Door face warping on Raised-Panel Traditional fronts in Sunnyvale’s dry summers. Solid raised-panel doors expand and contract with humidity swings, and a door that sits near a west-facing window through a long dry summer can cup slightly. It’s slow and usually cosmetic, but it matters when you’re trying to match new doors to an existing run.
CGI Parts & Our Repair-vs-Replace Approach

Parts come in two grades, and we’ll tell you which one you’re getting. For direct-fit repairs we use CGI OEM hinges, drawer glides and touch-up kits, because a hinge that matches the original boring pattern saves you from re-drilling a door that’s still perfectly good. When an OEM equivalent is back-ordered or priced past what the repair justifies, we’ll quote a quality aftermarket soft-close hinge and explain the trade-off. We don’t keep a CGI parts shelf in Sunnyvale. Everything is ordered per job once we’ve confirmed the model and finish from the door itself.
The repair-or-replace call comes down to box integrity. If the particleboard cores are dry and solid, refacing with new doors and drawer fronts restores the look for a fraction of a full remodel, and partial replacement handles the one cabinet that took the leak. Full replacement only makes sense when moisture damage or structural failure runs through most of the run. Call (888) 426-8719 and we’ll give you a written assessment before any work starts.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We identify the CGI line and door style, check moisture content at sink bases and dishwasher openings, and test every hinge and glide in the affected run. You get a written summary of what failed and why.
- 2
Written price. Before any work starts, you receive a line-item price: parts, labor and what’s excluded. Not a range, not a verbal ballpark.
- 3
Repair or install. We order OEM or aftermarket hardware to fit, replace doors and fronts as needed, and set countertops with the substrate and seaming details the job requires. Background-checked, uniformed technicians arrive in the window we gave you.
- 4
Test and adjust. Every door and drawer gets opened, closed and checked for gaps, rub and soft-close function before we call it done. We leave the place cleaner than we found it.
- 5
Written guarantee. You receive the 365-Day Done Right Promise in writing. If the work fails inside the guarantee period, we come back and fix it at no charge.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in Sunnyvale
We work across the CGI cabinet families most common in Sunnyvale homes: ProCraft Shaker for its shaker-frame overlay, Euro Flat-Panel for the frameless 32mm system and full-overlay doors, Raised-Panel Traditional for the wood-framed look in older Sunnyvale kitchens, and Thermofoil Slab for contemporary face-frame and frameless installs. Beyond doors and boxes, that means hinge and glide replacement, drawer box repair, touch-up and finish correction, and the countertop and backsplash work that sits on top of the cabinets. We also handle cabinet installation and refacing from scratch, and kitchen layout work when you’re ready to change the footprint rather than just restore it.
We Also Service These Brands
CGI is one of several cabinet and finish lines we work on. We install and service KraftMaid and Wellborn cabinetry, fabricate and set Cambria, Silestone and Caesarstone quartz and stone surfaces, and fit Kohler and Moen fixtures in the same kitchens. That breadth matters when a CGI refacing job meets a countertop that needs replacing at the same time, or when you want the whole kitchen specified in one written price instead of three separate contractors.
FAQs – CGI Construction Service in Sunnyvale

Yes, in most cases we can source matching CGI doors and panels for an expansion, though the exact match depends on the line, door style and finish. ProCraft Shaker and Euro Flat-Panel are the easiest to match because their profiles are stable and current. Thermofoil Slab can be harder: finish dye lots shift over time, so a door ordered years after the original install may read slightly different in daylight even when the specification matches. We confirm the model and finish from your existing door before ordering, and we’ll tell you upfront if an exact match isn’t realistic so you can plan around it. Call (888) 426-8719 for a free estimate.
Heat and steam break down the adhesive at the edge of the vinyl film, and once a corner lifts, moisture gets behind the film and the peel spreads. The usual culprits are a dishwasher venting steam straight into the adjacent door face and an oven that radiates heat into the cabinet run beside it. Sunnyvale’s long dry summers don’t help either, because the film expands and contracts against a substrate that moves at a different rate. Replacing the affected doors and checking adjacent boxes for swelling solves it in most kitchens. Call (888) 426-8719 for a written quote.
Refacing is usually the better call when the cabinet boxes are structurally sound, because you get new doors and drawer fronts without tearing out boxes that are still doing their job. A common CGI kitchen issue is thermofoil door faces peeling near the range or dishwasher, often because heat and steam break down the adhesive over time. A qualified installer typically removes and replaces the affected doors and checks adjacent boxes for swelling; if the cabinet cores are dry and solid, refacing with new doors and drawer fronts restores the look without a full remodel. Full replacement only makes sense when moisture damage runs through most of the boxes. Cabinet installation in Sunnyvale runs $4,000 – $13,000 depending on the run length and door line, so refacing often comes in well under that. Call (888) 426-8719 to schedule a free estimate.
A misaligned drawer is almost always a glide problem, not a drawer-box problem. On wide CGI drawer stacks, the rear mounting bracket shifts under torsional load, and the drawer starts rubbing on one side with uneven gaps. The fix is either re-aligning the glide or replacing the pair with OEM-compatible hardware. Don’t ignore it. A rubbing drawer wears the finish off the box and shortens the glide’s life. Call (888) 426-8719 and we’ll diagnose it during a free estimate.
Yes, and the care is mostly about moisture and heat, not cleaning products. Keep the dishwasher and sink-base cabinet edges dry, fix supply-line drips promptly, and don’t let a wet sponge sit against a particleboard edge. In Sunnyvale’s dry summers, solid raised-panel doors benefit from stable indoor humidity. That’s a small thing, but it slows the cupping that shows up near west-facing windows. Call (888) 426-8719 for a free estimate.
CGI cabinet and kitchen work in Sunnyvale typically runs $4,000 – $13,000 for cabinet installation, $2,000 – $6,500 for countertop installation, and $800 – $2,500 for a backsplash. A full kitchen remodel ranges from $14,000 – $45,000 depending on layout, cabinet line and countertop material, and a small kitchen remodel runs $9,000 – $20,000. Kitchen island installation is $3,000 – $10,000. Those are real ranges for this market, and your written price will be specific to your job. Call (888) 426-8719 for an exact quote. Estimates are free.
We can’t speak for CGI’s warranty terms, and we’re not authorized by the manufacturer, so we won’t pretend otherwise. What we can do is work in a warranty-safe way: we use OEM hinges, glides and touch-up kits where direct fit matters, we don’t drill new holes in a door face to correct an alignment problem that belongs at the hinge plate, and we document every part we replace. That record protects you if a manufacturer warranty question ever comes up. Call (888) 426-8719 for a free estimate.
Book Your CGI Service in Sunnyvale, CA
Whether it’s peeling thermofoil, a sagging drawer stack or a full cabinet replacement with new quartz counters, we’ll put the price and the guarantee in writing before work starts. Call (888) 426-8719 to schedule your free estimate. A live person answers around the clock.
Written by the team at Penhallow Remodeling Sunnyvale.












