







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Bathroom Remodeling: The Sunnyvale Owner’s Guide
Unilock-compatible bathroom remodeling in Sunnyvale typically runs $9,000 – $28,000 installed, and the price depends on layout, tile, fixtures and whether the shower pan needs to be rebuilt. We give you that number in writing before any work starts. If you’re holding a Unilock product and something has failed – a loose paver-style shower shelf, a cracked decorative border, a grout joint that opened – you’re not the first Sunnyvale homeowner to land here. Most people discover the problem on a weekend morning: a shift underfoot, or a bead of caulk that won’t stay sealed. That’s usually the first sign the substrate beneath the finish has moved.
Key Takeaways
- A full Unilock bathroom remodel in Sunnyvale runs $9,000 – $28,000; a small bathroom is $5,000 – $12,000.
- Most failures we see trace back to moisture under the finish, not the finish itself.
- We give a written price before work starts and back the job with our 365-Day Done Right Promise.
- Background-checked, uniformed technicians on every visit – you know who is in your home.
Which Unilock Models This Applies To

Unilock is a name most Sunnyvale owners know from driveways and patios, not bathrooms. The company makes segmental retaining wall and paver products, and some of its finishes get pulled indoors for decorative shower niches, tub surrounds and vanity faces by contractors who like the look. That matters when you’re matching a part: the model line on the box or the back of a loose piece tells you the finish (heritage or smooth), the nominal size, and the edge profile – and a mismatched edge profile is the compatibility gotcha that bites most homeowners. A 12-inch piece with a beveled edge won’t sit flush against a butt-jointed piece with a straight edge, and the seam will show as a dark line within weeks.
Here’s how to identify what you have. Look for the stamped label on the original packaging or the boxed lot number. Measure the actual face of the piece, not the nominal size, because inches tend to run a little small or large across lots. Then decide between OEM and aftermarket. For Unilock specifically, genuine replacement pieces come from the same lot series and match color; quality aftermarket equivalents exist, but color drift runs high across dye lots, so we match the finish in person rather than off a photo.
One note: we’re an independent service provider in Sunnyvale. We are not affiliated with Unilock, and we don’t claim to be. We install Unilock-compatible products and source matching pieces through trade suppliers.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Bathroom Remodeling Is Failing
A failing tile or paver install rarely announces itself. It whispers. Here are the five symptoms we see most in Sunnyvale bathrooms.
- A hollow sound when you tap the tile or paver. That means the bond has broken – the piece is no longer sitting on the substrate. It’s a small repair now and a bigger one if water gets behind it.
- Grout joints that open and close with the seasons. Sunnyvale sits in a mild climate, but interior humidity still moves a piece if the substrate wasn’t set right. A hairline crack that comes and goes means movement, not wear.
- Caulk that peels at the tub or shower base within weeks of applying. This is moisture coming from behind, not the caulk going bad. Re-caulking over it is a bandage; the source has to be found.
- A dark line or stain at a seam. That’s a mismatched edge profile showing dirt and water intrusion. It won’t buff out. The seam has to be reset.
- Soft or spongy floor underfoot near a shower or tub. That’s the substrate – the layer under the finish – telling you it got wet and stayed wet. This is the one we take most seriously.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

The installed price for a Unilock-compatible bathroom remodel in Sunnyvale runs $9,000 – $28,000. A small bathroom runs $5,000 – $12,000. What drives the number: bathroom size and layout, whether the shower pan or tub surround is rebuilt, tile or paver finishing, and fixture selection. A shower replacement alone runs $3,000 – $8,500; a walk-in shower install runs $4,500 – $12,000.
We don’t price in ranges on the invoice. You get a written line-item price before any work starts – parts and labor broken out – so the number on day one is the number on the invoice. No change orders on work we scoped. Every project carries our 365-Day Done Right Promise in writing: if something fails inside the year, we come back and fix it at no charge.
DIY or Call Us?
Here’s the honest split. You can safely check for a hollow sound, look for cracked grout, and see whether caulk is peeling. What you shouldn’t do yourself is pull a piece that’s set in thinset or mortar to “see what’s under it.” If the substrate is wet, that piece was holding back water damage, and pulling it lets the moisture spread. There’s also real risk in demoing a bathroom floor without knowing where the water lines run. That’s the point where a trained technician earns their keep.
If your failure is cosmetic – a loose decorative piece, a single cracked paver in a niche – we can often quote it small. If it’s structural, we’ll tell you plainly and give you a written price to fix it right. Call (888) 426-8719 to schedule your free estimate. A live person answers, day or night.
FAQs

A properly installed Unilock-compatible finish lasts 20 – 30 years in Sunnyvale’s climate, but the lifespan is set by the substrate, not the finish. If the moisture barrier and backer board are right, the finish outlasts the warranty. If they’re wrong, you’ll see failure in 2 – 3 years. Call (888) 426-8719 – estimates are free.
Sometimes, yes. A single loose piece, a failed grout line, or a mismatched seam can often be reset without a full rebuild. We’ll tell you honestly which one you’re looking at before we quote. Call us for a free estimate and a straight answer.
A targeted repair is usually a day. A full bathroom remodel runs 2 – 3 weeks, planned around your schedule. We give you a written timeline and a defined arrival window before work starts.
We source through trade suppliers who can match the lot series and finish, and we check the color in person rather than off a photo. We don’t claim to stock parts or carry them on a truck – we source the match for your project. We install materials from recognized brands like KraftMaid, Cambria and Silestone alongside the tile and finish work, so the products behind the guarantee are solid. Call (888) 426-8719 to schedule your free estimate.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












