







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Techo-Bloc Bathroom Remodeling: The Sunnyvale Owner’s Guide
Techo-Bloc bathroom remodeling in Sunnyvale typically runs $9,000 – $28,000 installed, depending on the size of the room, the tile or stone series you choose, and how much plumbing has to move. We install Techo-Bloc pavers and wall stone in bathrooms where homeowners want a natural-stone feel underfoot, and we give you a written price before anything gets pulled or set. This is a planned remodel, not an emergency call, so we schedule it properly and tell you the arrival window up front.
Most Sunnyvale owners don’t land here because a part failed overnight. They call after a smaller problem shows itself: grout that keeps cracking along the shower floor, a stone threshold that rocks when you step on it, efflorescence blooming white on a paver base, or a few tiles that sound hollow when you tap them. In a 1950s or 1960s Sunnyvale ranch house, that’s usually a sign the substrate underneath has moved or taken on moisture, not that the stone itself is bad.
Key Takeaways
- Techo-Bloc bathroom work in Sunnyvale general falls in the $9,000 – $28,000 range installed.
- The stone is rarely the failure point. The substrate, waterproofing and drainage under it are.
- Small bathrooms run $5,000 – $12,000; walk-in showers alone run $4,500 – $12,000.
- Every job gets a written price before work starts and our 365-Day Done Right Promise in writing.
Which Techo-Bloc Models This Applies To

Techo-Bloc makes several product families that show up in residential bathrooms and wet areas: their pavers and slabs used as shower floors and bathroom flooring, their wall stone and veneer used on accent walls and around tub surrounds, and their step and coping pieces used for thresholds and shower curbs. Each family comes in set nominal dimensions, and those dimensions are the first thing to check before you order anything. A coping piece cut for a 3-inch curb won’t sit correctly on a 4-inch curb without a build-up behind it, and that mismatch is one of the most common reasons a stone threshold rocks within a year.
How to identify what you have
Measure the actual face of the piece, not the box label. Techo-Bloc pavers and slabs are nominal, so a piece sold as a standard size can measure a fraction under it once it’s been cut on site. Look for a stamp or ink mark on the underside of loose pieces, check any leftover cartons for the series name, and photograph the profile edge of a coping or threshold piece from the end. That profile, more than the color, tells us which family you have and whether a matching replacement exists.
OEM vs. aftermarket for Techo-Bloc
Techo-Bloc products are proprietary. There is no generic “equivalent” paver or coping that matches a Techo-Bloc profile and color exactly, so when a piece is damaged we match the series or we build a deliberate contrast rather than pretending a lookalike is the same product. Where an exact match isn’t available, we’ll tell you before you spend money and lay out the options. We also install KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler and Moen fixtures on the same jobs, and we’re careful to keep the material story honest on every one.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Techo-Bloc Bathroom Remodeling Is Failing
Most of what goes wrong in a stone bathroom in Sunnyvale traces back to water or movement, not to the stone. These are the five symptoms we see most and what each one usually means underneath.
- Grout cracks in the same line every few months. A repeating crack along the same joint means the substrate is flexing or the grout is bridging a movement joint that should be a soft joint. Regrouting alone fixes the appearance, not the cause.
- Hollow sound when you tap the tile or stone. A dead thud means the bond between the piece and the bed has let go, often from a thinset that dried out before the stone went down. It’s a re-set, not a re-grout.
- White bloom or dark staining at the base. Efflorescence or a darker wet mark points to moisture wicking up through the setting bed because the waterproofing layer wasn’t tied into the drain correctly. This is the one to take seriously.
- A threshold or curb that rocks underfoot. Movement at a curb or step edge usually means the framing under it wasn’t stiffened before the stone went on. In older Sunnyvale homes over a crawl space, a soft subfloor is the usual culprit.
- Caulk joints pulling away at corners or the shower base. Shrinking caulk at a change of plane is normal wear, but lifting caulk at the shower pan edge can mean water is getting behind it. Check the pan and the drain before you just re-caulk.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Bathroom remodeling in Sunnyvale runs $9,000 – $28,000 installed, and that number moves with room size, material choice, and how much plumbing gets relocated. A small bathroom comes in at $5,000 – $12,000. A walk-in shower installed on its own is $4,500 – $12,000, a tub-to-shower conversion is $3,500 – $10,000, and a straight shower replacement is $3,000 – $8,500. If the job is really just a vanity swap, that’s a different scope at $800 – $3,000.
What drives the range up or down
- Substrate and waterproofing. Tearing out and rebuilding a proper waterproofed base is real labor, and skipping it is how the same failure comes back.
- Material tier. A natural-stone-look paver floor costs more in material than a basic porcelain, and cuts add labor.
- Plumbing moves. Keeping the drain and supply lines where they are keeps the price down. Moving them is a permit and a rough-in.
- Layout. A narrow Sunnyvale bathroom with a tight shower alcove takes more careful cutting than an open floor plan.
You get a written price before any work starts, and that written number is what’s on the invoice. The parts-and-labor breakdown is line-itemed so you can see what the stone costs versus the setting and finishing. Our 365-Day Done Right Promise covers the work in writing, and if something we installed fails inside that year, we come back and fix it at no charge.
DIY or Call Us?
Some of this you can check yourself, and some of it you should leave alone. There’s no high-voltage danger in a bathroom floor or shower wall, but there is water damage waiting to happen behind tile, and that’s worth being honest about.
What you can safely check
- Tap across the floor and shower walls and mark where the sound goes hollow.
- Look at the caulk at corners and the shower base for lifting or gaps.
- Check for white bloom, dark wet marks, or soft spots at the base of a wall.
- Photograph any crack and note whether it comes back in the same line.
Where DIY goes wrong
The failure is almost never the tile or stone on top. It’s the waterproofing membrane and the setting bed under it, and you can’t assess either without taking the surface up. Pulling a few pieces to “take a look” often means cracking the ones you didn’t plan to replace, and re-grouting over a substrate that’s still moving just resets the clock. If the floor sounds hollow, the curb rocks, or water is wicking up a wall, that’s a conversation worth having before you spend on materials.
Call (888) 426-8719 and we’ll take a look and give you a written price. A live person answers, and the estimate is free.
FAQs

The stone itself will outlast the installation around it by decades. What limits the life of a stone bathroom floor or shower is the waterproofing and setting bed under it, which is why most of what we replace in Sunnyvale is the base, not the stone. Our technicians have up to 22 years of experience reading these failures. Call (888) 426-8719 for a free estimate.
Often yes, if the failure is isolated. A single hollow piece or one cracked threshold can usually be lifted and re-set if the bed under it is still sound and the waterproofing wasn’t breached. If the sound runs across a whole floor or the curb is moving, the honest answer is that the base needs rebuilding, and we’ll show you why. Call (888) 426-8719 and we’ll tell you which one you’re looking at.
A focused shower or floor re-do typically takes a few days to about a week once materials are on site; a full bathroom remodel runs longer. We give you a defined arrival window and keep the job site clean, and we build the schedule from your actual scope, not a brochure average. Call (888) 426-8719 to get a timeline for your room.
We match the existing series and color through supplier channels rather than substituting a lookalike, and if an exact match isn’t available we tell you before you commit. We’re an independent service provider and not affiliated with Techo-Bloc. Call (888) 426-8719 and we’ll confirm what’s available for your product.
Whether you’re redoing a shower floor, replacing a rocking threshold, or remodeling the whole bathroom around a stone floor you love, we’ll give you a written price up front, arrive in the window we gave you, and leave the place cleaner than we found it. Every technician is background-checked and arrives in uniform, and a live person answers the phone around the clock. Call Penhallow Remodeling Sunnyvale at (888) 426-8719 for your free estimate.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












