







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Silestone Home Additions & ADU: The Sunnyvale Owner’s Guide
Silestone is a quartz surface, and it belongs in an addition or accessory dwelling unit the same way it belongs in a kitchen: as the countertop, vanity top, or island surface that gets set once the structure, cabinets, and plumbing are ready. A Silestone-finished home addition in Sunnyvale typically runs $45,000 – $130,000, while a full ADU build runs $90,000 – $220,000. Installation is planned work, not same-day work – most additions take several weeks to a few months depending on size, permits, and inspection scheduling.
Owners usually come to this page after a different kind of failure: a Silestone surface that chipped at the sink cutout, a seam that opened after the slab was set over a flexing substrate, or a countertop ordered for a new ADU that arrived with the wrong edge profile and stalled the whole build. The symptom is rarely the quartz itself. It’s almost always what’s under it, how it was templated, or how the piece was handled before it was installed.
Which Silestone Models This Applies To

Silestone is sold as slabs and as fabricated pieces, not as a numbered appliance with a model plate. What you’re actually matching is the colorway, the slab thickness, and the edge profile. The color name is stamped on the slab tag or the fabricator’s paperwork: think Calacatta Gold, Eternal Serena, or Blanco Maple. Thickness is usually 2 cm or 3 cm, and that number matters because your cabinet and substrate have to be built to carry it – a 3 cm slab over a 2 cm-rated frame will telegraph every deflection into the surface. Edge profiles (eased, bullnose, mitered) are cut by the fabricator, so a replacement piece has to come from a shop that can match the original profile or the seam will read as a visible line.
The OEM-versus-aftermarket decision here is different from a mechanical part. There’s no “genuine replacement” stamped with a serial number – what matters is whether the slab comes from a recognized quartz line and whether the fabricator can match the colorway closely enough that a repair in one corner of a Sunnyvale addition doesn’t look like a patch. We source Silestone and comparable quartz through recognized trade suppliers, and we tell you up front which pieces will match the existing run and which will always read slightly different under direct afternoon sun. Penhallow Remodeling Sunnyvale is an independent remodeling company, not affiliated with Silestone; we install and fabricate around their product, we don’t represent them.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Silestone Home Additions & ADU Is Failing
Walk the addition or ADU and look at the quartz with a straight edge and a flashlight. Most problems show up along seams, cutouts, and the front edge:
- A hairline crack radiating from the sink or cooktop cutout. Quartz is strong in compression but brittle at a sharp inside corner, and an unsupported cutout concentrates stress right there. If the crack appeared within a season of installation, the substrate under the counter is usually the cause, not the slab.
- A seam that’s opened or turned gray. Seams fail when the two pieces were set on slightly different planes, or when the cabinet run shifted after the adhesive cured. In Sunnyvale’s older additions, that shift often traces to a floor that wasn’t leveled before cabinets went in.
- A chip along the front edge. Edge chips happen from impact – a pot, a vacuum, a chair – but they also happen when an eased edge was cut too thin on a 2 cm slab during fabrication.
- Visible deflection or a “hollow” sound when you tap the counter. That’s a sign the piece is bridging a gap in the substrate, and quartz doesn’t flex. Left alone, a bridging slab cracks.
- Discoloration near the backsplash or around a bar sink. Quartz is non-porous, so surface staining is rare – which means a stain usually points to moisture getting behind the piece, not into it. That’s a substrate or sealant problem, not a countertop problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Sunnyvale homeowners actually pay, installed, with the price in writing before work starts:
- Countertop installation (new or full replacement): $2,000 – $6,500
- Kitchen island installation: $3,000 – $10,000
- Backsplash installation: $800 – $2,500
- Bathroom vanity installation: $800 – $3,000
- Full home addition, Silestone surfaces included: $45,000 – $130,000
- Full ADU construction, Silestone surfaces included: $90,000 – $220,000
- Garage conversion to living space: $30,000 – $80,000
The range moves with slab size and colorway, thickness (2 cm versus 3 cm), edge profile, number of cutouts, and whether the substrate or cabinets underneath need correction before a new piece can go down. Every install comes with a written price line by line, so the number you see before demo is the number on the invoice. It also comes with the 365-Day Done Right Promise: if the work fails inside a year, we come back and fix it at no charge.
DIY or Call Us?
You can safely do a few things yourself: measure the existing piece’s length, depth, and thickness; photograph the slab tag or fabricator paperwork so we can match the colorway; check whether the counter rocks or sounds hollow when tapped; and note where the seam sits. That information makes the quote faster and more accurate.
What you shouldn’t do is pull a set Silestone counter off its substrate or attempt to re-set a cracked piece. Quartz slabs weigh 100 to 300 pounds depending on size, they shatter rather than bend, and a cracked slab has sharp edges that cut deep. A slipped piece can also take out the cabinets underneath and turn a countertop job into a kitchen rebuild. Bring us the measurements and photos, and we’ll tell you honestly whether a repair patch is realistic or whether the piece needs replacing. Call (888) 426-8719 for a free estimate – a live person answers, day or night.
FAQs

A well-installed Silestone countertop should last 20 to 30 years or more. The quartz itself is dense and non-porous, so the failure point is almost always the substrate, the seam, or the cutout – fix those properly and the surface outlasts them.
Sometimes, yes. Small chips along an edge and hairline cracks away from a cutout can often be filled and color-matched by a fabricator. Cracks that run through a sink or cooktop cutout, or any piece that’s bridging a gap in the substrate, usually need replacement – patching those just buys a few months. We’ll look at photos and tell you which one you’re facing before you commit. Call (888) 426-8719 for an exact quote; estimates are free.
A straight countertop replacement is usually a two-visit job: one to template, one to install once the slab is fabricated, with roughly one to two weeks between them for cutting and finishing. Additions and ADUs take weeks to months, and the Silestone surfaces go in near the end, after cabinets and plumbing are set. We give you a written arrival window for each visit and hold to it.
We order through recognized trade suppliers and work with fabricators who can match your colorway and edge profile. If you have the slab tag or the original paperwork, bring it – matching is far more reliable with the color name and thickness in hand. For projects beyond the countertop, we also source KraftMaid and Cambria, plus Kohler fixtures, alongside Silestone.
Silestone surfaces are only as good as the build around them, and in Sunnyvale that means getting the substrate, the cabinets, and the plumbing right before the slab ever arrives. We give you a written price before any work starts, put the guarantee in writing on every project, and send background-checked, uniformed technicians so you know who’s in your home. Our technicians have up to 22 years of experience, and a real person answers the phone around the clock. Call (888) 426-8719 to schedule your free estimate.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












