







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Bathroom Remodeling: The Sunnyvale Owner’s Guide
Schluter bathroom remodeling in Sunnyvale typically runs $9,000 to $28,000 installed, depending on bathroom size, tile selection, and how much demolition and substrate work your project needs. We install Schluter-compatible systems – KERDI waterproofing, DITRA uncoupling membrane, and the shower profiles and drains that work alongside them – and we give you a written price before any work starts. Most failed Schluter projects reveal themselves the same way: a soft spot at the shower curb, grout that keeps cracking in the same three tiles, or a musty smell that comes back no matter how often you clean.
Which Schluter Models This Applies To

Schluter isn’t a single product line, and knowing which system you’re replacing changes the part and the price. The three most common in Sunnyvale bathrooms are KERDI (the bonded sheet waterproofing that goes under tile), DITRA (the uncoupling membrane that lets tile and substrate move independently), and KERDI-LINE or KERDI-DRAIN (linear and point drains for curbless and standard showers). Each has its own series and sizes. KERDI comes in 1-meter and 5-meter rolls at several widths; DITRA comes in 3’3″ and 1-meter widths; KERDI-LINE drains are specified by grate length, from roughly 28 inches up to 72 inches, and by outlet size.
To identify yours, check the printed band along the roll edge (Schluter prints the product name and dimensions directly on KERDI and DITRA), or measure the width of the roll and the drain grate yourself. On the OEM-versus-aftermarket question: for waterproofing membrane and drain bodies, we use genuine Schluter. The tolerances on the fleece backing and the drain bonding flange are what keep water out, and a thin aftermarket substitute is exactly where a Sunnyvale shower fails two winters later. Where a quality equivalent works, we’ll tell you honestly. We don’t stock parts and don’t carry them on a truck – everything for your project is ordered to spec. Penhallow Remodeling Sunnyvale is an independent service provider and is not affiliated with Schluter.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Bathroom Remodeling Is Failing
These are the failure signals we see most often on Sunnyvale bathrooms, and what’s usually behind each one:
- Grout cracking in the same lines, season after season. The uncoupling layer has lost its bond to the substrate, so movement in the floor or wall transfers straight into the tile. Regrouting hides it for a few months, then it comes back.
- A soft or spongy shower curb. Water has gotten behind the membrane at a poorly bonded seam or curb transition. By the time you can feel it, the framing behind the tile is wet and the repair is bigger than a patch.
- Dark or damp grout lines near the drain. The drain bonding flange was installed out of plane or the membrane wasn’t lapped correctly, so water sits under the tile instead of draining. This is common on conversions where the old mud bed wasn’t fully removed.
- Musty smell that returns after cleaning. Trapped moisture in the substrate or wall cavity, not surface mold. Cleaning the tile won’t reach it. It needs the assembly opened up.
- Tile that sounds hollow when you tap it. The thinset has debonded from the membrane or the membrane from the substrate. Hollow-sounding tile over a shower is a leak waiting for the next rainy season.
Sunnyvale’s climate matters here. The dry summers pull moisture out of materials and the wet winters push it back in, which is a lot of expansion and contraction across a tile floor. That’s why the uncoupling layer earns its keep – and why a shortcut there tends to fail within a few years rather than a few decades.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A full bathroom remodel with a Schluter-compatible waterproofing and drain system in Sunnyvale runs $9,000 to $28,000. A smaller bathroom that needs only the shower rebuilt typically lands in the $5,000 to $12,000 range. Here’s what moves the number up or down:
- Walk-in shower installation: $4,500 to $12,000, driven by drain type (a KERDI-LINE linear drain costs more than a KERDI-DRAIN point drain), curbless versus curbed, and tile size.
- Tub-to-shower conversion: $3,500 to $10,000. Substrate rebuild is the wildcard – what we find under the old tub decides the final number.
- Shower replacement only: $3,000 to $8,500 when the surrounding bathroom stays intact.
- Vanity installation: $800 to $3,000, often bundled into a full remodel.
Every homeowner gets a written price before work starts, and that written number is what shows up on the invoice – no change orders because demo revealed something we could have anticipated. Our technicians have up to 22 years of experience, they’re background-checked and arrive in uniform, and every project carries our 365-Day Done Right Promise in writing. If something we installed fails inside that year, we return and fix it at no charge.
DIY or Call Us?
Some things are safe to check yourself. You can look for the printed Schluter branding on an exposed roll edge, tap tile to listen for hollow spots, and photograph the drain grate with a tape measure beside it so we can identify the model on the phone. What we’d steer you away from is pulling up tile or cutting into the membrane to “see what’s going on” – once a waterproofing layer is breached, the leak gets worse until the whole assembly is rebuilt, and you’ve turned a repair into a full replacement.
Rebuilding a Schluter assembly is a precision job: lap lines, flange heights, drain slope, and thinset consistency all have to be right, and none of it is visible once the tile goes down. That’s the part that separates a shower that lasts from one that fails in two winters. If you’re unsure whether your problem is surface-level or structural, call (888) 426-8719 and a live person will answer – we’ll help you sort out what you’re looking at before you commit to anything.
FAQs

A properly installed Schluter waterproofing and drain assembly typically lasts 20 to 30 years in a Sunnyvale home. The membrane itself doesn’t wear out – failures almost always trace back to installation (seams, flanges, substrate prep) rather than the product aging.
Sometimes. A single failed seam or a leaking drain gasket can often be repaired without tearing out the whole shower, depending on how much tile and membrane we have to open to reach it. We’ll tell you honestly after we look – repair if it’s a real fix, replacement if patching would just postpone the same failure. Call (888) 426-8719 for a free estimate.
A shower-only rebuild usually takes 3 to 7 days of working time; a full bathroom remodel runs 2 to 4 weeks. The range depends on demo scope, substrate condition, and tile layout. We give you a written schedule before we start and a defined arrival window each day.
We order genuine Schluter components to your project’s exact spec – roll width, drain size, profile type – from authorized suppliers, and we confirm the part against your measurements before ordering. We don’t keep parts in stock or carry them in a van, so nothing is substituted on the fly.
Bathroom materials also come from brands you may already know: KraftMaid, Cambria, and Silestone are among the names we work with when a remodel calls for cabinetry and countertops alongside the tile work.
If your Sunnyvale bathroom is showing the signs above, the next step is simple: call (888) 426-8719 to schedule your free estimate. You’ll get a written price, a real arrival window, and a name you can reach if anything goes wrong. A live person answers, day or night.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












