







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Home Additions & ADU: The Sunnyvale Owner’s Guide
We install Mighty Buildings-compatible home additions and ADUs in Sunnyvale, and a typical installed project runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU, depending on size, site conditions and finish level. Unlike a failed part, this isn’t something you swap in a day: scheduling starts with a free on-site estimate, and we give you a written price before any work begins. Most Sunnyvale owners discover a problem the same way: a panel seam that’s separating, a module wall that’s reading cold in one spot, or a permit inspector who flags the foundation connection during a resale inspection. By then the issue has usually been building quietly for a season or two.
Sunnyvale sits in a pocket of the South Bay where summer heat spikes and winter rain arrive in concentrated bursts, and both put real stress on prefab panel joints and foundation interfaces. We’re a local general contractor, not Mighty Buildings, and we’re not affiliated with them. What we are is a team that has pulled apart enough of these assemblies to know where they fail and what a correct repair costs.
Key Takeaways
- Installed additions typically run $45,000 – $130,000; ADUs run $90,000 – $220,000 in Sunnyvale.
- Panel seam separation and foundation connection issues are the two most common failures we see.
- Every project gets a written price before work starts and a written 365-Day Done Right Promise.
- We source Mighty Buildings-compatible components through the manufacturer’s own parts channel where possible, and quality aftermarket equivalents where it makes sense.
- Call (888) 426-8719 for a free estimate; a real person answers around the clock.
Which Mighty Buildings Models This Applies To

Mighty Buildings builds its panels and modules in a factory and assembles them on site, and the component names and connection details vary across their product generations. That matters because the panel fasteners, seam sealants, and foundation anchor plates are not interchangeable between earlier and later builds. Before we order anything, we ask for the model designation on your project drawings or the compliance label inside the unit, and we measure the actual anchor spacing and panel thickness rather than assuming. A “standard” replacement kit ordered against the wrong generation is the single most common mistake we get called to correct.
On the OEM-versus-aftermarket question, the honest answer is that it depends on the part. Structural connectors and anything that meets a stamped engineering detail should come from Mighty Buildings or a product that matches the stamped specification exactly, and we won’t substitute there. Non-structural trim, weather sealants and finish components often have quality aftermarket equivalents that meet or exceed the original spec, and using them can bring the project cost down without cutting the life of the assembly. We won’t source a part we can’t stand behind, and every project carries our written guarantee.
If your build includes cabinetry or finish work, we also handle KraftMaid, Cambria and Silestone installs alongside the structural repair, so the whole job lands on one written price instead of two contractors pointing at each other.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mighty Buildings Home Additions & ADU Is Failing
- Visible seam separation between panels. Gaps open when the sealant has failed and the panels are moving independently. Left alone, water finds the gap and the substrate behind it.
- Cold spots or drafts along a wall line. This usually means the thermal break at a panel joint has broken down. In Sunnyvale’s summer heat, it also shows up as a room that won’t hold temperature.
- Foundation anchor plates with rust staining. Rust at a connection means moisture is reaching the metal. That’s the failure mode we take most seriously because it affects structural attachment.
- Musty odor near the base of an exterior wall. A smell is moisture, and moisture behind a panel is the thing to catch early. Cosmetic repair without addressing the source is how a fix fails six weeks later.
- Doors or windows that suddenly stick. When framing shifts because a connection has loosened, openings go out of square. It’s a symptom, not a door problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the honest range for Sunnyvale, broken out by scope:
| Scope | Installed Price Range |
|---|---|
| Home addition | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
What drives the top of that range: site access, foundation work, whether permits and inspections are included, and the finish level you choose. What’s included on every job is a written price before work starts, so the number on day one is the number on the invoice, and a written 365-Day Done Right Promise. If the work fails inside that year, we come back and fix it at no charge. A live person answers the phone 24/7 at (888) 426-8719.
DIY or Call Us?
There are things you can safely check. You can look for visible seam gaps, photograph rust at a foundation plate, and note where a wall reads cold. That information helps us quote accurately.
What you shouldn’t touch is anything structural or electrical. Loosening a panel fastener or a foundation anchor without understanding the load path can turn a repairable issue into a serious one, and on any Mighty Buildings assembly tied to a stamped engineering detail, a DIY reconnection risks your permit and your inspection. Our technicians arrive in uniform and are background-checked, and they’ve handled this kind of work for up to 22 years. Call (888) 426-8719 for a free estimate and we’ll tell you plainly what the job takes.
FAQs

A properly sealed and anchored assembly should hold for decades. The sealant and joint interfaces are the parts that age first in this climate, and they typically need attention every several years rather than lasting the life of the structure. Call (888) 426-8719 for an exact assessment and quote.
Often yes, and we’ll tell you which path is honest. A sealant failure or a localized moisture issue is usually a repair. A foundation anchor that’s corroded through generally isn’t. We give you a written price for whichever scope the inspection supports. Call (888) 426-8719 to schedule.
A single component repair is measured in days; a full addition or ADU project is measured in months, and we give you a real schedule in the written price. We don’t promise heroic speed on structural work. We promise the arrival window we wrote down. Call (888) 426-8719 for a free estimate.
We source structural components through the Mighty Buildings parts channel against your model’s stamped specification, and quality aftermarket equivalents for non-structural items where they meet spec. We don’t stock parts locally or carry them on a truck; every part is ordered for your job. Call (888) 426-8719 to get started.
If you’re in Sunnyvale and something on your Mighty Buildings addition or ADU is telling you it’s failing, call (888) 426-8719 for a free estimate. You’ll get a written price before any work starts, a real arrival window, and a written guarantee behind the job. We operate to The Kingswell Way: say the price before the work, show up in the window we gave, and leave the place cleaner than we found it.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












