







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Master Halco Home Additions & ADU: The Sunnyvale Owner’s Guide
We build and finish home additions and ADUs in Sunnyvale, and we work regularly alongside Master Halco fencing and gate systems that define the outdoor envelope of those projects – the gates, fence lines, and access points that make an addition or ADU usable and secure. A home addition in Sunnyvale typically runs $45,000 – $130,000, and a detached or attached ADU runs $90,000 – $220,000, priced in writing before work begins. When a Master Halco gate or fence component at the perimeter of an addition starts to fail, it usually shows up as a gate that sags and drags, a latch that won’t catch, a post that’s gone soft at the base, or a hinge that’s stripped its screws out of the metal.
Sunnyvale’s marine-influenced air and winter rain cycles are hard on exterior steel and galvanized hardware, and owners often discover the problem the first time a gate won’t close flush against a new ADU entry or a pool enclosure.
Which Master Halco Models This Applies To

Master Halco makes fencing systems and gate hardware across several product families, and the correct replacement part depends on which one you have. The most reliable way to match a part is to read the label or stamp on the post cap, hinge plate, or latch body, then measure the gate frame opening and post spacing before ordering anything.
Common compatibility gotchas we see in Sunnyvale:
- Post size vs. hinge style. A hinge built for a 2-inch post won’t seat correctly on a 2.5-inch post without an adapter, and forcing it leads to the sag you’re trying to fix.
- Galvanized vs. powder-coated finishes. Mixing a galvanized replacement into a powder-coated run looks mismatched within a season and can accelerate corrosion at the joint.
- Gate weight ratings. Ornamental aluminum gates and heavier steel gates need different hinge and latch hardware; an undersized latch on a heavy gate is the single most common premature failure.
On the OEM-vs-aftermarket question: for structural hardware (hinges, latches, post anchors), matching the OEM part is usually worth the small premium because the tolerances are set for that gate. For cosmetic pieces (caps, finials, trim), a quality aftermarket equivalent is fine and often cheaper. We’re an independent service provider and not affiliated with Master Halco; we source compatible parts and tell you plainly which is which.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Master Halco Home Additions & ADU Is Failing
These are the failure modes we actually see on Sunnyvale properties:
- The gate sags and drags on the ground. Usually a hinge that’s loosened or a post that’s shifted in wet soil, not the gate itself.
- The latch won’t catch or pops open. A worn latch striker or a gate that’s out of square after seasonal ground movement.
- Rust streaks at the hinges and base plate. Galvanized hardware reacting to constant moisture; common near the coast-influenced parts of Sunnyvale.
- A soft or wobbly post. Wood or concrete footings that have degraded, letting the whole run lean.
- Screws backing out of the hinge plate. Metal fatigue or an undersized fastener for the gate’s weight – a slow failure that gets worse each season.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For the addition and ADU work itself, Sunnyvale pricing is straightforward and written before we start:
| Project | Typical Installed Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
What drives the range: square footage, foundation and site work, whether the ADU is attached or detached, utility runs, and finish level. Gate and fence hardware replacement is quoted as a line item – parts plus labor, itemized. You get a written price and a written guarantee before any work starts, and a 365-Day Done Right Promise backs the work.
DIY or Call Us?
You can safely check a few things yourself: read the stamp on the hardware, measure the post and gate opening, and note whether the sag is in the hinge or the post. What goes wrong on DIY for this part is structural – a gate that’s truly out of square or a post footing that’s failed won’t be fixed by swapping a hinge, and a heavy gate with the wrong hardware can drop. We’d rather you call and get it right than have a gate come down on someone. Call (888) 426-8719 and we’ll give you a written price before anything starts.
FAQs

How long does Master Halco gate hardware last in Sunnyvale? Typically 8 – 15 years for quality hardware, with hinges and latches failing first in our wet winters – closer to 8 in exposed spots near the bay.
Can the part be repaired instead of replaced? Often yes. A loose hinge or a slightly out-of-square gate can frequently be re-set and re-hung for less than a full swap; we’ll tell you honestly which makes sense.
How long does a swap take? A single hinge or latch replacement is usually a short visit; a full hardware set on a heavy gate takes longer because alignment has to be reset. We give you a real arrival window.
How do you source the part? We match the OEM part number when structural tolerances matter and use quality aftermarket equivalents for cosmetic pieces. We don’t guess – we measure and confirm compatibility first. Call (888) 426-8719 for a free estimate.
We also install KraftMaid, Cambria, and Silestone products on the interior side of Sunnyvale additions, so the whole project stays under one written price and one guarantee.
Ready to price your Sunnyvale addition or ADU properly? Call Penhallow Remodeling Sunnyvale at (888) 426-8719 for a free estimate – a written number, a real arrival window, and a guarantee in writing before any work begins.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












