







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Union City, CA
We provide independent KraftMaid service across Union City, from the 1950s and 1960s ranch kitchens on the flats in ZIP 94587 to the newer custom homes up in the eastern hills. What makes our KraftMaid work here different is that we plan every cabinet and layout change around Union City’s own building division, including the Alquist-Priolo fault-zone and hillside slope-stability review that flat Fremont or Newark jobs never trigger. We are not affiliated with or authorized by KraftMaid; we work for you, the homeowner, and we put the price in writing before any work starts. Call (888) 426-8719 to schedule a free estimate.
Why Union City Residents Choose Us for KraftMaid Service

KraftMaid cabinetry shows up in a lot of Bay Area homes, and it shows up in a few recognizable ways in Union City. We’ve handled enough of it to know which lines are still well supported, which ones are worth repairing, and which ones are done. That matters when you’re deciding whether a 40-year-old box is salvageable or whether you’re better off replacing it.
Our technicians have up to 22 years of experience, and every one of them is background-checked and arrives in uniform, so you know exactly who is working in your kitchen. We source OEM-compatible KraftMaid hinges, slides and finish touch-up for current lines, and when a part is obsolete we tell you honestly what the aftermarket substitute is and what it costs. Every job comes with a written price up front and our 365-Day Done Right Promise: if the work fails inside the guarantee period, we come back and fix it at no charge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Solve in Union City
Most of the KraftMaid problems we see in Union City trace back to the house around the cabinet, not the cabinet alone. These are the five we run into most:
- Water-damaged toe kicks and delaminating box bottoms under the sink. Union City’s fog-plain humidity and winter rain, combined with decades of slow supply-line leaks in 1950s-70s ranch kitchens, swell particleboard and lift the box veneer. The cabinet looks fine from the front until you open the door and see the bottom sagging.
- Sagging doors and rolled-over hinges on older full-overlay boxes. This is exaggerated in homes near the Hayward Fault, where repeated small seismic movement racks the wall and knocks the frames out of square. The doors stop closing flush and start rubbing.
- Faded, checked and yellowed paint or thermofoil on sun-exposed runs. The warmer, wind-exposed eastern hillside homes take more UV than the flats, and a south- or west-facing cabinet run shows it.
- Out-of-plumb wall cabinets in Eichler-era post-and-beam kitchens. These homes don’t have a continuous stud wall to hang from, so an install that assumed a standard stud layout opens up uneven gaps and doors that rub.
- Racked frames and swollen boxes that no longer justify repair. On a 30-year-old KraftMaid box with a warped frame, refacing is money on a bad foundation. The straight answer is replacement with a current line.
KraftMaid Service in Union City: What Local Conditions Mean for Your Equipment
Union City sits on the Hayward Fault and straddles both the flat bay-plain land and the steep eastern hillsides. That combination means a kitchen cabinet and layout remodel in 94587 can draw structural and geotech scrutiny that the same job in flat Fremont or Newark never sees. Alquist-Priolo fault-zone review and hillside slope-stability requirements run through Union City’s own building division and stack on top of the standard plan check. For KraftMaid owners, that changes the job: if you’re moving a wall to relocate cabinets, or hanging heavier wall cabinets in a hillside home, the plan may need structural calcs and a geotech sign-off before a permit is issued. Contractors who know the city’s plan-check quirks move projects through far faster than out-of-town crews. Our KraftMaid service is built around that reality, and we plan the permit path before we order a box.
KraftMaid Models & Products We Service in Union City
We work with the full range of KraftMaid cabinetry in Union City kitchens. KraftMaid Vantage, the framed all-plywood box, is the workhorse in mid-century ranch kitchens. KraftMaid Momentum, the framed MDF-door line, is common in budget 1990s-era refreshes. KraftMaid Prelude full-overlay shows up in mid-range homes, and custom painted and glazed maple or cherry cabinetry runs in the hillside custom homes. For current lines, OEM hardware and finish touch-up are the right call and we source them per job. For obsolete Momentum and older framed boxes, good aftermarket soft-close hinges and slides are a reasonable substitute, and we say so plainly. We don’t hold local stock; parts are ordered for each job, so you get what fits your cabinet rather than a generic replacement.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Union City

Here’s what KraftMaid cabinetry and kitchen work typically run in Union City, with the number on day one and the number on the invoice the same:
| Service | Typical Range |
|---|---|
| Full Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
What drives the number up or down: cabinet line and box construction, whether layout changes trigger a permit and geotech review, countertop material (Cambria and Silestone sit higher than entry quartz), and whether the existing wall framing needs correction before new boxes go up. A free estimate includes a written price, a cabinet and layout assessment, and a plain explanation of what the permit path will look like for your address. Call (888) 426-8719 for an exact quote; estimates are free.
Serving Union City, CA – Our Local Coverage Area
We serve Union City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Union City
Not always, but often yes if your home sits near the Hayward Fault trace or on a hillside lot. Union City’s building division layers Alquist-Priolo fault-zone and slope-stability review on top of its standard plan check, so a layout change that moves cabinets or adds a wall can require structural calcs and a geotech sign-off. We plan that path before the permit is filed. Call (888) 426-8719 to talk through your address.
Usually yes, with the right approach. The wall framing is the variable: Eichler-era post-and-beam kitchens don’t have a continuous stud wall, so the cabinet hang has to be corrected before new boxes go in. We assess the wall first and tell you what needs correcting. Call (888) 426-8719 for a free assessment.
The most common causes are out-of-square wall frames from repeated small seismic movement near the Hayward Fault, plus worn hinges on older full-overlay boxes. Both are fixable; the hinge swap is straightforward, and the frame correction depends on the wall. We’ll tell you which one you’re looking at. Call (888) 426-8719 when you’re ready to price it.
If the box bottom is swollen and the frame is racked, replacement is the straight answer; refacing a damaged box is throwing money at it. If the box is sound and only the doors and finish are tired, refacing makes sense. Our free estimate includes an assessment of both. Call (888) 426-8719 to schedule one.
Bay-plain fog and winter rain on the flats drive moisture into toe kicks and box bottoms, especially under the sink, while the warmer, wind-exposed hillsides fade and check sun-exposed finishes faster. Neither kills a good cabinet, but both need attention. Call (888) 426-8719 and we’ll tell you what your cabinets are dealing with.
Service Areas Near Union City
We provide KraftMaid service throughout our Union City service area, including the flats in ZIP 94587 and the eastern hillside homes above the bay plain. Nearby, we also serve Fremont and Pleasanton, along with Sunnyvale, Santa Clara and Milpitas.
Book Your KraftMaid Service in Union City Today
KraftMaid cabinets in a Union City home deserve a straight answer, a written price, and a guarantee that holds. Call (888) 426-8719 to schedule your free estimate. A live person answers around the clock, no voicemail maze, and you’ll have a written number before any work starts.
Written by the team at Penhallow Remodeling Sunnyvale.












