







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Driveway & Pavers: The Sunnyvale Owner’s Guide
If your Jerith-branded driveway or paver work is failing, a full replacement typically runs $7,000 – $18,000 for a paver driveway in Sunnyvale, with a defined arrival window and a written price before any work starts. We install and repair Jerith-compatible driveway and paver systems across Sunnyvale. We’re an independent service provider, not affiliated with Jerith. Most homeowners spot trouble the same way: pavers start shifting in the spring, or joints open up after a wet winter and never close.
The sequence is familiar. A paver at the bottom of the drive drops a quarter inch each season, a hairline crack runs a couple feet across the walkway, or the base begins to settle where the slab meets the lawn. Nobody calls on day one. They call after the driveway has moved twice and a car tire catches the edge. That call is right where this page picks up.
Which Jerith Models This Applies To

Jerith makes a range of paver profiles and driveway edging systems, and the correct part depends on which line your job used. Some installations mix profiles – field pavers, border courses, and edge restraints – so a single “Jerith paver” isn’t really one part. Before we quote anything, we confirm three things: the profile name, the face dimensions (Nominal 4×8, 6×9, and 8×8-sized pavers are common, but profile naming varies by batch), and the color family. Color matters more than most homeowners expect. Sunnyvale’s UV load fades older paver faces, and a replacement from a different dye lot can read a shade light or dark next to the field.
How to identify the right part: check the original install paperwork or contractor notes, look for a pallet sticker or edge stamp on an exposed border paver, and measure width, depth, and thickness with calipers – not a tape. Thickness in particular (a common range is 1.5″ to 2.375″ depending on application) tells you the correct series.
On the OEM-versus-aftermarket question: matching a genuine Jerith profile matters most for visible field pavers and any part that ties into the edge restraint. For base materials, bedding sand, and joint sand – the layers under and between the pavers – quality aftermarket equivalents are typically fine and often what we use. We’ll say plainly which parts need the exact Jerith match and which don’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Driveway & Pavers Is Failing
- Pavers rocking or “walking” underfoot. Usually the bedding sand has migrated or washed out, or the base wasn’t compacted to spec. A single rocking paver is one thing; five in a row means the base is talking.
- Joint sand washing out after rain. Common in Sunnyvale’s wet-season cycles, where water sheets off the house and runs across the driveway edge. Unfilled joints invite weeds and let water reach the base.
- Edge restraint pulling away or cracking. The edge is what holds the field tight. A failed edge lets the outer course spread – and it never recovers on its own.
- Hairline or surface cracks in individual pavers. Often from point-loading – a vehicle jack, a heavy pot, an overloaded wheelbarrow. Sometimes it’s a bad batch, sometimes a base issue underneath.
- Settlement dips at the garage apron or transition. Where the paver field meets the concrete apron or a step, differential settlement shows up first. Left alone, it becomes a trip edge and a drainage trap.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for Jerith-compatible driveway and paver work in Sunnyvale, calibrated to our local market:
| Job | Installed Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Replacement (full teardown) | $5,000 – $14,000 |
| Driveway Sealing (fresh install protection) | $250 – $700 |
| Paver Patio Installation | $3,500 – $11,000 |
What moves the number: square footage, whether the base is repaired or fully rebuilt, if the existing pavers are salvageable for reuse, drainage corrections, and edge-restraint replacement. Our written price separates parts, base prep, and installation labor – line items, not a single number pulled from the air. The 365-Day Done Right Promise is written into every job: if pavers settle or joints fail inside the guarantee window due to our work, we come back and fix it at no charge. Free second visit if the repair fails; no service call, no re-inspection fee.
DIY or Call Us?
A homeowner can safely do a few things. Fill joint sand with a dry drag broom and re-sweep once it settles. Pull a rocking paver’s neighbor and check whether the bedding is intact or gone. Re-fill next to the house where water runs off the roof.
Where DIY goes wrong: pulling pavers to fix base settlement and putting them back without re-compacting. Paver work fails at compaction, drainage slope, and edge restraint – none of which you can verify by eye, and all of which decide whether a driveway lasts five years or twenty-five. On a full replacement, that’s not a weekend job. The safety footnote is real here: heavy pavers and unstable edges are a genuine hazard to haul and handle without a helper, and cuts across wet joints run deep.
Call (888) 426-8719 for a free estimate – we’ll walk your Sunnyvale driveway, pull a measurement, and give you a written number before work starts. Same for the other brands we service: KraftMaid, Cambria, and Silestone.
FAQs

How long does a Jerith paver driveway last in Sunnyvale? A correctly installed paver driveway with a properly compacted base typically lasts 25 – 30 years in Sunnyvale’s climate, but joints need topping off every 2 – 3 years and edge restraint should be inspected annually. Heat and wet-season cycles are the two biggest stress factors.
Can a failing paver be repaired instead of replaced? Often yes. A single rocking paver, a broken border stone, or a failed edge restraint can usually be replaced individually if matching parts are available. If base settlement covers more than a few square feet, a partial rebuild makes more sense than spot repair.
How long does a paver driveway replacement take? A typical single-car driveway in Sunnyvale runs 2 – 4 days on site: teardown and haul-off day one, base prep and compaction day two, field and border install day three, joint sand and sealing on the final day. A double-wide or heavily graded driveway can push to 5 – 6 days.
How do you source the correct Jerith part? We confirm your profile, face dimensions, thickness, and color from the paperwork, edge stamp, and on-site measurement, then source the closest matching Jerith-compatible profile or the exact match when the line is still produced. We buy against the confirmed spec, not a guess.
If your Jerith driveway or paver work is moving, cracking, or draining wrong, call (888) 426-8719 to schedule a free estimate. Our technicians have up to 22 years of experience, and we answer the phone 24/7 – a real person, not a voicemail prompt.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












