







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Windows & Doors: The Sunnyvale Owner’s Guide
We install and service ES Windows-compatible windows and doors across Sunnyvale, with most full window replacement projects running $4,500 – $15,000 and impact-rated installations running $8,000 – $25,000 depending on count, frame material, and glass package. ES Windows is a real regional brand with real part numbers, so the first job is matching your unit to the right hardware before anyone picks up a tool. Owners usually find us at the worst moment: a window that won’t latch in the rain, a patio door that drags and gouges the track, or a fogged dual-pane unit that hides the view of the Santa Cruz Mountains foothills. Call (888) 426-8719 and we’ll get a technician out to measure the exact part before we quote anything.
We’re independent. Penhallow Remodeling Sunnyvale works on ES Windows products and everything around them, but we have no affiliation with ES Windows the manufacturer. That’s actually good for you: we aren’t obligated to sell you a whole new window when a specific part or a specific door panel is the real problem.
Which ES Windows Models This Applies To

ES Windows makes vinyl and aluminum-framed window and door lines for the California market, including single-hung, slider, casement, and patio door products. The part that matters depends entirely on which series you have, and the two lines have different pivot bars, roller assemblies, lock hardware, and sill components. Vinyl single-hung units from the mid-2000s and later often use a spring-loaded balance assembly; sliders use a roller carriage with a specific wheel diameter that must match or the sash will ride the track crooked.
Here’s how to identify what you have. Pull the sash out of a slider and look for the model sticker on the frame’s top or side channel. Look for a series number and a manufacturing date code. If the sticker has faded or peeled off (common on Sunnyvale homes that face south and bake all day), measure the sash width, the roller pocket spacing, and the glass unit thickness. Most ES Windows sliders run a 3/4-inch to 1-inch insulated glass unit; the glazing channel and tilt-latch hardware are all sized to that. Write those three measurements down. They’ll route us to the right part in one call instead of three.
OEM versus aftermarket is the real decision. OEM parts match exactly, but an obsolete series can take weeks. Quality aftermarket equivalents from established hardware makers often fit on day one and cost less. We’ll tell you which applies to your specific ES Windows unit, and we won’t pretend an aftermarket part is OEM.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Windows & Doors Is Failing
These are the symptoms that tell us which part has failed before we ever arrive. Each one points at a different component.
- The sash won’t stay up. A window that slides down on its own means the balance assembly has lost spring tension, or the spring has broken outright. Vinyl single-hungs in Sunnyvale see constant thermal cycling between cool nights and warm afternoons, which shortens spring lifespan over roughly 10 – 15 years of normal use.
- The slider drags, grinds, or jumps out of track. Rollers wear flat and flat-spot over time, and a worn roller presses against the sill channel. Clean the track first (a single grain of sand can cause this), then check the carriage. If the roller wheel is flat-spotted or cracked, that’s the culprit.
- The glass is fogged or has water droplets inside it. This is a failed sealed unit. The perimeter seal has degraded and atmospheric moisture has entered the insulated glass cavity. No cleaning or repair stops this from the outside; the unit must be replaced.
- The latch, lock, or handle won’t close or has gone sluggish. Lock hardware wears at the strike plate, or a tilt-latch mechanism has cracked internally. A window that won’t lock is the one you fix first, because an open window is a security issue regardless of the weather.
- You can feel a draft along the sill, meeting rail, or frame perimeter. Weatherstripping, sweep seals, and glazing channel compress over time, particularly after a summer of UV exposure. A cheap part. The trick is identifying exactly where the air is coming in, which a hands-on inspection tells us quickly.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

ES Windows replacement work in Sunnyvale ranges widely because the number of openings drives most of the price. One failed window sash repair is a small job. Replacing a full set across a house is a different project. Here’s what actual Sunnyvale projects run:
| Project | Installed Price Range |
|---|---|
| Window replacement (per full-house or multi-unit project) | $4,500 – $15,000 |
| Impact-rated window installation | $8,000 – $25,000 |
What drives the range: the number of units, frame material (vinyl versus aluminum), insulated glass package including low-E coating, and whether you’re replacing the whole window or just the glass unit. Impact-rated units cost more because of the laminated glass construction and heavier hardware package. Labor cost scales with access difficulty. A second-story window on a steep Sunnyvale lot takes more time than a first-floor slider off a ground-level wall. We give you a written price before any work starts. The number on day one is the number on the invoice.
Every project is covered by our 365-Day Done Right Promise in writing. If the work fails inside that period, we come back and fix it at no charge. If a repair fails, the second visit is free, no service call fee, no re-inspection charge.
DIY or Call Us?
You can safely check things like: whether the track needs cleaning (a stale roller is often just a dirty track), whether the lock is simply misaligned at the strike plate, and what the model sticker on the window frame says. Those checks cost you nothing and sometimes solve the whole problem in ten minutes.
Where DIY goes wrong for ES Windows work is at the sash removal and hardware replacement stage. Prying a sash out of a stuck vinyl channel without knowing the correct tilt-latch release procedure can crack the frame or bend the track. Replacing a broken balance assembly without the right spring tension can send the sash down hard and break the glass. On higher floors, window work involves ladder and height risk that isn’t worth the trade-off. We carry the part and the know-how to do it once correctly. Call (888) 426-8719 and describe the window. A live person answers 24/7. We’ll tell you honestly whether a site visit makes sense or whether we can solve it with a photo and measurements.
FAQs

A well-maintained ES Windows vinyl unit typically gets 15 – 25 years before the glass seal, weatherstripping, or hardware needs attention. The frame itself lasts longer than the serviceable parts. Sunnyvale’s UV exposure and the area’s occasional heat events accelerate weatherstripping failure faster than you’d expect in a cooler climate. Call (888) 426-8719 and we’ll assess the remaining life of your specific unit.
Yes, in many cases, and it depends on which part has failed. A bad roller, a broken balance, weatherstripping, or a lock can all be replaced without touching the frame or glass. A fogged glass unit needs its sealed unit replaced but not the whole window. Frame damage or a warped sash usually points toward replacement. We’ll tell you straight which situation you’re in before you commit to anything.
A hardware repair like a roller, balance, or lock is usually a one-visit job of one to three hours per window. A glass unit replacement takes a bit longer because the glazing needs to be re-set and sealed properly. A full window replacement is scheduled as a block, and we tell you the window up front. Call (888) 426-8719 for a free written price before any work starts.
We start with the model sticker, the manufacturer date code, and three measurements: sash width, roller pocket spacing, and glass unit thickness. From there we identify the exact ES Windows series and the correct hardware. Where OEM parts are still available we use them. Where an obsolete series makes an OEM part unavailable or unreasonably slow, we’ll offer a quality aftermarket equivalent and say so plainly. Background-checked technicians arrive in uniform. The price is in writing before work begins. If you also need cabinetry work done while we’re there, we source from brands like KraftMaid, Cambria, and Silestone, but windows and doors are where this conversation started.
Ready to sort out your ES Windows units? Call Penhallow Remodeling Sunnyvale at (888) 426-8719 for a free estimate. Tell us which window or door is giving you trouble, and we’ll get you a written price before any work begins, backed by our 365-Day Done Right Promise.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












