







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Windows & Doors: The Sunnyvale Owner’s Guide
We install and rebuild ECO Window Systems windows and doors for Sunnyvale homeowners. Full window replacement typically runs $4,500 – $15,000 for a house, and impact-rated units can reach $8,000 – $25,000; individual part repairs and sashes sit well below that. We schedule estimates within a few days, not months.
Most Sunnyvale owners find us the same way. A bedroom window that won’t latch shut. A sliding door that drags on its track. Fog between the panes that showed up one morning after a cold night. A weep hole that’s started weeping the wrong direction. Or a lock that turns but doesn’t actually engage, which you discover the hard way when the wind pushes the sash in. The hardware held for years, then the seals aged out, the rollers flattened, or the latch mechanism gave out. Now the window leaks air, sticks, or won’t seal, and you need the right ECO part matched to your model, not a generic one off a shelf.
Which ECO Window Systems Models This Applies To

ECO Window Systems has built both vinyl and aluminum-framed product lines over the years, and the parts that fail most are series-specific: sash balances, tilt-latch assemblies, multi-point door hardware, rollers, weatherstrip, and glazing seals. The fastest way to identify your unit is to look for the manufacturer label etched or stickered on the top or side of the sash, usually visible when you tilt the window in or slide it open. That label carries the model and series number. If it’s gone, we measure the sash height, width, and balance channel to cross-reference.
Here’s the compatibility gotcha: ECO balances and rollers come in specific channel depths and roller diameters that change across production runs. A balance that measures 1/2 inch too short or a roller a few millimeters off won’t seat correctly and will fail again within months. This is where generic aftermarket parts bite people. OEM is the safe bet for moving hardware. For weatherstrip and glazing seals, a quality aftermarket equivalent with the correct durometer and profile is often just as good and easier to source. We tell you which is which before ordering. We’re an independent service provider, not affiliated with ECO Window Systems.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ECO Window Systems Windows & Doors Is Failing
- Fog or condensation between the glass panes. The insulated glass unit’s perimeter seal has failed, letting moisture in. In Sunnyvale’s mild, damp winters and warm summers, that seal cycles constantly and ages out faster than most owners expect.
- The sash won’t stay up, or slams down. A balance has lost its tension or snapped. This is the number-one failure on double-hung and single-hung units, and it’s a spring under load, so it’s not a part to wrestle with yourself.
- The door drags or won’t glide. Rollers have flattened or the track has debris and wear. Sometimes it’s a simple roller swap, sometimes the track itself is worn and needs replacing.
- The latch turns but doesn’t lock. The multi-point or sash lock mechanism has worn or misaligned. On a sliding door this is a security concern, not just an annoyance.
- Drafts, whistling, or water staining at the frame. Weatherstrip and corner seals have degraded. Left alone, the water intrusion can reach the rough opening and the wall.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Individual part repairs (a balance, a set of rollers, a latch) generally run at the low end of the window work we do. Full window replacement in Sunnyvale typically runs $4,500 – $15,000 for a whole house depending on unit count and frame type, and impact-rated window installation runs $8,000 – $25,000. What drives the range up: number of openings, whether frames are sound or need reframing, glass spec (tempered, low-E, impact), and whether trim and flashing need rework.
You get a written line-item price before any work starts. Parts and labor are itemized so you see exactly what the part costs and what the install costs. That number on day one is the number on the invoice. Our workmanship carries the 365-Day Done Right Promise: if a repair fails inside the year, we come back and fix it at no charge, with a free return visit if the repair doesn’t hold.
DIY or Call Us?
Some checks are safe for any homeowner. Open and close each unit, note which ones stick, look for fogged glass, feel for drafts at the edges, and photograph the sash label so you have your model number ready. Cleaning a track and tightening a visible screw or two is fine.
What we don’t recommend: removing or adjusting sash balances, which are spring-loaded under tension and can release with real force, and re-sealing insulated glass units, which needs the right equipment and a clean vacuum seal to last. Roller and latch swaps look simple but go wrong when the part isn’t the exact match, and you end up doing the job twice. For anything involving a spring, a sealed glass unit, or a security latch, call a trained professional. One honest visit beats a weekend of guessing. Call (888) 426-8719 and we’ll tell you straight whether it’s a part or a panel.
FAQs

Expect 15 to 25 years for the frame, but moving hardware and glazing seals often go sooner, and in Sunnyvale’s damp winters the insulated glass seal is usually what fails first. A real person answers our line 24/7 at (888) 426-8719 if you want a straight read on yours.
Often yes. A balance, roller, latch, or weatherstrip can be swapped without touching the frame or glass. If the insulated glass unit has fogged or the frame itself is failing, replacement makes more sense, and we’ll tell you which one you’re facing. Estimates are free.
Most single-part repairs are done in one visit, typically a couple of hours per unit. Full replacement of multiple windows can run a day or more depending on count. We give you a defined arrival window and leave the site clean.
We identify your series from the sash label or by measuring the part and cross-referencing ECO’s specs, then order the correct OEM or quality aftermarket equivalent and confirm it fits before install. Call (888) 426-8719 to book your free estimate.
Whether it’s a balance that finally gave out, a sliding door that won’t lock, or a full set of ECO Window Systems units you’re ready to replace, we’ll give you a written price up front, a real arrival window, background-checked and uniformed technicians, and the 365-Day Done Right Promise in writing. We also work with KraftMaid, Cambria, and Silestone on the projects that go beyond windows and doors. Call (888) 426-8719 for a free estimate in Sunnyvale today.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












