







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Bathroom Remodeling: The Sunnyvale Owner’s Guide
Bathroom remodeling in Sunnyvale using ECO Window Systems-compatible doors, windows and enclosure hardware typically runs $9,000 – $28,000 installed, depending on bathroom size, whether you’re moving plumbing, and the finish level you choose. Most owners land in the middle of that range for a full hall bath with a new walk-in shower, vanity and tile. We’re an independent contractor and we’re not affiliated with ECO Window Systems, but we work with their components regularly and can match what’s already in your home.
If you own property with ECO Window Systems products in it, you probably found this page after something started leaking, sticking, fogging or failing to close. That’s the usual way it begins: a soft spot at the shower curb, a door that no longer latches square in the frame, or a window in the bathroom that’s been sweating through every winter morning. The fix isn’t always the part you think it is.
Key Takeaways
- Full bathroom remodels with ECO Window Systems-compatible components in Sunnyvale run $9,000 – $28,000 installed.
- Smaller baths that keep the existing footprint land closer to $5,000 – $12,000.
- A walk-in shower alone runs $4,500 – $12,000; a tub-to-shower conversion runs $3,500 – $10,000.
- We give you a written price before work starts and back every job with the 365-Day Done Right Promise.
Which ECO Window Systems Models This Applies To

ECO Window Systems products aren’t all built the same, and this is where most homeowners get tripped up. The shower doors and bath windows we see across Sunnyvale are typically identified by a manufacturer label on the glass edge, the door hinge plate, or the frame head, listing a series code and installation date. That label is what lets us confirm frame dimensions, glass thickness and hinge spacing before we order anything. Without it, we take three measurements on site instead: rough opening, glass panel size, and the finished trim-to-trim distance.
On the window side, ECO units are usually vinyl-framed with specific sill and jamb depths, which matters because bathroom windows sit within a wet zone and need the right flashing and moisture barrier behind them. If the original installation skipped that detail, you’ll see water staining at the frame corners long before you notice anything else.
The OEM vs. aftermarket decision:
- OEM is the right call when the existing frame, glass and hardware are all ECO and you’re just replacing a failed component – a hinge, a seal, a roller, a glass panel. Fit is guaranteed, and you keep the warranty relationship intact.
- Quality aftermarket makes more sense when you’re remodeling the whole bathroom and the ECO components are coming out anyway. You aren’t matching a part, you’re building a new assembly with new materials. We install Kohler and Moen fixtures, Cambria and Silestone counters, and KraftMaid vanities if you want to move to a coordinated set.
If your ECO system is still performing and the rest of the bathroom isn’t, replacing only the failed piece usually saves you thousands. We’ll tell you which camp you’re in after a free on-site look.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ECO Window Systems Bathroom Remodeling Is Failing
Bathroom components in Sunnyvale take a beating. Our marine-layer humidity and the fog that rolls in most summer mornings sit against exterior glass and seals for hours. Add shower steam from the inside and you’re asking those seals to work harder than in a dry climate. Here’s what we see most often:
- Water on the shower frame interior after a shower. The seal or gasket has lost its compression, usually because the track was installed without a proper weep path. Water sits, the seal stays wet, and it fails faster than it should.
- A door that won’t close flush or drags at the bottom. The hinge plate or nylon roller has worn, or the frame has shifted slightly – common in older Sunnyvale homes where the subfloor moved under a tile installation.
- Fog between window panes in the bath. The insulated glass seal has failed. You can’t fix that by drying the frame; the unit itself needs replacing.
- Caulk lines that crack or peel within weeks of caulking. This usually signals movement behind the tile or a moisture issue you haven’t found yet. The caulk is the messenger, not the problem.
- Soft spots or discoloration at the shower curb or the base of the window frame. Water is getting behind the tile or the frame. This one calls for a real look, not another tube of sealant.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here are the installed ranges we quote for bathroom work in Sunnyvale. These are for the work completed, materials and labor together – not estimates that change once the crew arrives.
- Full bathroom remodel: $9,000 – $28,000
- Small bathroom remodel: $5,000 – $12,000
- Walk-in shower installation: $4,500 – $12,000
- Tub-to-shower conversion: $3,500 – $10,000
- Shower replacement (glass and surround only): $3,000 – $8,500
- Bathroom vanity installation: $800 – $3,000
What drives you toward the top of a range: relocated plumbing, a tile pattern that requires more cuts, a custom glass enclosure, or structural repair once demo opens the wall. What keeps you lower: same footprint, standard-size fixtures, and existing plumbing you can reuse.
Every quote is written before work starts. If the number changes because we found something real behind the wall, you’ll see it in a written change order – not a verbal “we’ll sort it out later.” Every job is backed by the 365-Day Done Right Promise.
DIY or Call Us?
Some things you can check safely. Wiping a shower seal dry, confirming the door hinge screws are tight, noting where water beads up after a shower, photographing the manufacturer label on the glass – none of that puts you at risk. Re-caulking a joint that keeps failing will only hide the problem, but doing it once to see whether the moisture returns is a fair test.
Where DIY goes wrong with ECO Window Systems components in a bathroom: bathroom work sits in a wet zone, and waterproofing mistakes behind tile or around a window frame don’t show up for a season or two. By the time you see them, you’re fixing subfloor and framing, not a $40 tube of caulk. Glass and hardware replacements also carry a real injury risk if you’re handling tempered panels without the right setup. There’s no shame in stopping at the point where the job needs a moisture-tested, inspected install. Call (888) 426-8719 and we’ll walk you through what you’re looking at over the phone before anyone comes out.
FAQs

Vinyl-framed units installed with proper flashing typically go 15 – 20 years; glass seals can fail earlier, closer to 10 – 15, in a coastal-humidity climate like ours. Shower door hinges and rollers usually last 7 – 12 years before they wear out of alignment. If yours is in that window and starting to stick or seal, wear is expected, not a defect. Call (888) 426-8719 for an assessment and a written number.
Hinges, rollers, seals and gaskets are usually repairable; failed insulated glass and frame rot are not. If the fogging is between panes, that unit is done and needs replacement. If the door just drags, a hinge and roller set often solves it. We’ll tell you which situation you’re in, honestly, including when the honest answer is “repair isn’t worth it.” Call (888) 426-8719 for a free estimate.
A glass and surround swap runs 1 – 3 days; a full bathroom remodel runs 2 – 4 weeks depending on tile, plumbing changes and inspection timing in Sunnyvale. We give you a written schedule before we start and an arrival window for each phase, so you know when someone will be there. Call (888) 426-8719 to schedule your free estimate.
We order from manufacturer and trade suppliers matched to your label and measurements – we don’t keep parts stocked on a truck or in a shop. What we do is verify the part number against your unit before ordering it, so you’re not paying for a return trip over a wrong fit. For full remodels, we source through recognized trade brands – KraftMaid, Cambria, Silestone, Kohler, Moen – alongside whatever ECO-compatible hardware your job needs. Call (888) 426-8719 for a free estimate.
If you’ve spent one more morning mopping up a shower that won’t seal, or watching a bathroom window fog up while everything else stays dry, we can give you a straight answer and a written price. No pressure, no upsell script – just a number you can hold us to and a guarantee behind it. The 365-Day Done Right Promise covers every job we do, and a live person answers the phone around the clock when you call. Call Penhallow Remodeling Sunnyvale at (888) 426-8719 for your free estimate.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












