







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Sunnyvale Homeowners Choose Dvele Construction
We provide independent Dvele construction service in Sunnyvale, working on the modular assemblies these homes are actually built from rather than treating them like stick-built houses. That means we scope kitchen and bathroom remodeling and roof repair around module seams, SIP panels, and site-joined mechanical, plumbing, and electrical stub-outs – the points where factory modules meet on site and where most problems start. We are an independent service provider, not affiliated with or authorized by Dvele, and our experience comes from field work on these systems. Call (888) 426-8719 to talk through your Sunnyvale Dvele project.
Sunnyvale is an unusual place to own a Dvele. The city has spent years pushing dense mixed-use redevelopment along El Camino Real and through its old orchard-town downtown, while the post-war ranch neighborhoods keep filing ADU and whole-house remodel permits at some of the highest rates in the region. A factory-built modular home sits right in the middle of that tension, and the work it needs has to clear Sunnyvale’s own planning and building review – a process that behaves differently from neighboring Cupertino or Mountain View. That’s the context we work in every week.
Why Trust Penhallow Remodeling Sunnyvale for Your Dvele Construction?

Our technicians have up to 22 years of experience, and the ones who take Dvele work have spent that time on the specific interfaces that make a modular home different. A Dvele LUMEN Series, a Q350 or Q450, or a custom modular and ADU configuration all share the same basic logic: factory modules arrive finished, get craned or set into place, and are joined on site. The craft is in those joints.
We use Dvele spec-matched or exact OEM parts for module interfaces, panels, and proprietary fittings, and we choose standard quality materials that meet spec for finishes where the brand name adds nothing structural. That keeps your warranty intact where it counts and keeps your budget from being spent on parts you don’t need.
Every job gets a written price before we pick up a tool, a real arrival window, and our 365-Day Done Right Promise in writing. If the work fails inside that year, we come back and fix it at no charge. Our technicians are background-checked and arrive in uniform, and a live person answers our phone 24/7 – not a voicemail maze.
We operate as part of the Kingswell family of companies under The Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Fix in Sunnyvale
These are the failures we see most often on Dvele homes in Sunnyvale, and why they happen.
- Site-joined plumbing stub-outs leaking behind finishes. A small leak often shows up at the transition where two modules meet, sometimes hidden behind a cabinet back or a bathroom wall. The cause is usually a connector or fitting at the joint, not the fixture itself. The fix means opening the joint, checking the module seam, and repairing any moisture-damaged SIP or drywall edge – not swapping the sink.
- SIP and module seam air and moisture breaches. Structural insulated panel seams need extra care for airtightness and moisture control before interior finishes go back on. In Sunnyvale’s wet winters, an under-sealed seam wicks moisture into the panel edge and shows up as a soft spot or a stain months later. We test and reseal before closing up.
- Electrical and mechanical transition problems at module interfaces. Where factory wiring and rough-in meet on site, we find contractor-grade transitions that passed a quick inspection but don’t hold up. Junction points and stub-outs at LUMEN and Q-Series seams are the usual suspects.
- Cladding and flashing attachment on modular wall framing. Modular wall framing and cladding attachment points don’t accept conventional roof flashing, tile backer, or cabinet blocking the same way a site-built wall does. Fasteners land in the wrong place and flashing gaps open over the long dry season.
- Factory-finished surfaces disturbed during service. The tolerances on a Dvele finish are tighter than site-built. A repair that would be routine elsewhere can scuff a factory surface and trigger a non-standard repair sequence. We plan the sequence before we open anything.
In a typical Dvele job, that leak behind a cabinet back is the first thing we look for – and it’s the one thing a generic contractor misses.
Dvele Parts & Our Repair-vs-Replace Approach

We source parts per job. For module interfaces, panels, and proprietary fittings, we use Dvele spec-matched or exact OEM parts – aftermarket substitutes at a module joint are how warranty claims get complicated. For finishes like tile, drywall, paint, and cabinets, a standard quality material that meets spec is fine and often the smarter spend.
We don’t claim to stock Dvele parts locally. Each job’s parts are ordered to the specific model and assembly, which is how you get the right fitting rather than the closest one on a shelf.
Our repair-vs-replace call is honest. When the module and structure are sound, correcting an interface is usually far cheaper than reworking a factory module. We’ll tell you which side of that line your job sits on, in writing, before work starts. Call (888) 426-8719 for a free estimate – the number you get is the number on the invoice.
Our Dvele Service Process – Step by Step
- 1
Diagnosis. We map the module layout, identify the seam or stub-out in play, and check the interface before assuming the fixture is at fault. For a leak, that means opening the joint and inspecting the module seam and any SIP edge for moisture damage.
- 2
Written price. You get the scope and the dollar figure in writing before any work starts. No verbal ballpark, no change order after demo.
- 3
Repair or install. OEM parts at the interface, spec-matched finishes elsewhere, with the repair sequence planned around the factory surfaces so nothing gets disturbed unnecessarily.
- 4
Test. We run the joint under pressure, check the seam for airtightness, and confirm the finish sits flush before we close up.
- 5
Warranty. Every repair comes with our written guarantee and the 365-Day Done Right Promise. If it fails inside the year, we come back and fix it at no charge.
Dvele Products We Service & Install in Sunnyvale

We work across the Dvele lineup: the LUMEN Series modular homes, the Q350 and Q450 standard models, and Dvele custom modular and ADU configurations. For Sunnyvale, that covers full kitchen remodeling, full bathroom remodeling, and roof repair – the three areas where modular interfaces most often need an experienced hand.
Kitchen and bath work in a Dvele means planning around module walls and stub-outs before cabinet blocking and tile backer go in. Roof repair means flashing and seam work that respects the module edges. We scope every job to how the home is actually assembled.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
Dvele isn’t the only brand we work with. We install KraftMaid cabinetry, Cambria and Silestone quartz countertops, and Kohler fixtures, and we handle standard site-built homes alongside modular ones. That matters for a Sunnyvale Dvele owner planning a remodel – the finish brands behind the work carry their own warranties, layered on top of ours.
FAQs – Dvele Construction Service in Sunnyvale
No. We are an independent service provider, not affiliated with or authorized by Dvele. Our expertise comes from field work on Dvele modular systems, not from a manufacturer relationship. Call (888) 426-8719 for a free estimate.
Yes – for module interfaces, panels, and proprietary fittings, we use Dvele spec-matched or exact OEM parts. For finishes, standard quality materials that meet spec are fine. Parts are ordered per job to the specific model and assembly.
It depends on the scope. A roof repair or a stub-out fix is often a focused job, while a full kitchen or bathroom remodel in a Dvele home runs like any planned remodel once the module interfaces are scoped. We give you a written schedule with your written price before work begins.
We cover the LUMEN Series, the Q350 and Q450 standard models, and Dvele custom modular and ADU configurations. Call (888) 426-8719 to confirm your model.
Not when the work is done correctly. Using spec-matched or OEM parts at module interfaces and planning the repair sequence around factory surfaces protects your warranty. We’re not authorized by Dvele, so we can’t speak for the manufacturer, but we scope every job to avoid disturbing the assemblies under warranty.
Partially – a Dvele kitchen or bathroom can be remodeled, but the work has to be scoped around module seams, SIP panels, and site-joined stub-outs, not treated as a stick-built frame. Cabinet blocking, tile backer, and flashing attach differently on modular wall framing.
A contractor experienced with modular interfaces, because a leak at a module joint usually isn’t the fixture. The typical fix opens the joint, checks the fitting and module seam, and repairs the connection plus any moisture-damaged SIP or drywall edge. Call (888) 426-8719 for a free estimate.
Plan around the module wall and stub-out before tile backer goes in. A walk-in shower runs $4,500 – $12,000 in Sunnyvale and a tub-to-shower conversion $3,500 – $10,000. Call (888) 426-8719 for an exact quote – estimates are free.
The flashing and attachment points on modular wall framing don’t accept conventional roof flashing the same way, so repairs need to respect the module edges. Roof repair in Sunnyvale runs $400 – $1,800. Call (888) 426-8719 for a free estimate.
Dvele Construction Pricing in Sunnyvale
| Service | Typical Sunnyvale Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Roof Repair | $400 – $1,800 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
These are the ranges we quote in Sunnyvale. What moves a kitchen toward the high end is layout, cabinet line, and countertop material; what moves a bathroom is whether the module stub-outs need reworking before tile backer goes in.
Book Your Dvele Service in Sunnyvale, CA
If you own a Dvele in Sunnyvale and need kitchen or bathroom remodeling or roof repair scoped to how the home is actually built, call Penhallow Remodeling Sunnyvale at (888) 426-8719. We’ll give you a written price before any work starts and back it with our 365-Day Done Right Promise.
Written by the team at Penhallow Remodeling Sunnyvale.












