







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Home Additions & ADU: The Sunnyvale Owner’s Guide
We build and finish Dvele-compatible home additions and accessory dwelling units for Sunnyvale homeowners, and the all-in installed range typically runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU, depending on square footage, foundation type, and finish level. No two of these projects follow the same calendar – a permitted addition in Sunnyvale usually takes months, not days, and we tell you the realistic window up front. Most owners don’t land on this page because a part “broke.” They land here because a Dvele module or room addition they bought into has a specific failing component – a wall panel joint that’s opening, a window that won’t seat right, a foundation anchor that’s backed out – and they need to know what it is, what it costs to fix, and who to call.
Key Takeaways
- Dvele factory-built wall and roof sections are engineered to tight tolerances; the part that fails first is usually the connection or the seal, not the structural panel itself.
- Installed pricing for an addition in Sunnyvale starts around $45,000 and reaches $130,000; a detached ADU runs $90,000 – $220,000.
- We’re an independent remodeling contractor, not affiliated with Dvele. We’ll tell you plainly whether your issue is a factory part, a site-installation problem, or normal settling.
- You get a written price before work starts and a 365-Day Done Right Promise on the work.
Which Dvele Models This Applies To

Dvele builds prefabricated homes and additions in a few core panel and module families, and the part you need depends on which one you have. Identifying the right match starts with three things: the label plate on the structural panel (Dvele stamps module and series information on the frame), the rough opening dimensions for any window or door you’re replacing, and the year the module shipped – because Dvele revised its wall-panel connection hardware between production runs, so a connector that fits a 2021 panel may not seat on a 2019 one. Measure, photograph the label, and write down the opening size before you order anything.
Where it gets tricky is the OEM-versus-aftermarket decision. For Dvele-specific connection brackets, panel sealants, and their proprietary flashing profiles, we lean toward OEM or an exact-match equivalent because a generic substitute rarely meets the same tolerance. For standard items – a window sash, a standard door frame, a fastener spec – a recognized aftermarket part works fine and costs less. We’ll tell you which category your part falls into rather than defaulting to the most expensive answer. Penhallow Remodeling Sunnyvale is an independent provider; we’re not affiliated with Dvele, so we source on your behalf rather than as their authorized agent.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Home Additions & ADU Is Failing
Owners usually notice a room addition problem weeks before it becomes a repair. Here’s what those early signals mean under the surface:
- A visible gap or daylight at a panel joint. The connection hardware has shifted or the original sealant has aged out, letting moisture and air through. Left alone, that gap moves into the framing.
- A window or door that sticks or won’t latch. Usually the rough opening has racked slightly from foundation movement or settling, not the window itself. Replacing the window without addressing the frame won’t fix it.
- Water staining at the base of a wall or on the ceiling near a roof seam. A flashing detail has failed – often where the Dvele roof section meets site-built framing. This is the most common leak point we see.
- A soft or spongy floor near an exterior wall. Moisture has reached the subfloor through a failed perimeter seal. This one moves fast and should be looked at promptly.
- Bouncy or uneven flooring in the addition. A foundation anchor or subfloor fastener has backed out. It’s fixable, but it’s a sign the load path needs a look before it gets worse.
If you’re seeing more than one of these, the fix is rarely a single swap. It’s usually a connection-and-seal scope, which we price in writing before we touch anything.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

What you pay depends on whether we’re repairing a connection, replacing a component, or building out the addition itself. Here are the ranges we quote for Sunnyvale, installed:
- Home addition (full build): $45,000 – $130,000
- Detached or attached ADU: $90,000 – $220,000
- Garage conversion (common ADU path): $30,000 – $80,000
- Isolated panel-joint, flashing, or seal repair: priced individually – usually a fraction of a full build, and always written down first
The range moves with square footage, foundation type (slab versus raised), finish level, and the permits involved. What stays the same is how we price: a written line-item number before any work starts, so the number on day one is the number on the invoice. We pull permits and pass inspections as part of the scope. Every project is covered by a written guarantee and our 365-Day Done Right Promise – if something we built fails inside the year, we come back and fix it at no charge.
DIY or Call Us?
Some of this you can safely check yourself. Walk the perimeter of the addition and look for gaps or daylight at panel joints. Press along the base of exterior walls for softness. Open and close every window and door to see if any stick. Photograph the Dvele label plate so you have the model information ready. That’s a reasonable evening’s inspection.
What you shouldn’t do is reseal a failing panel joint, re-anchor a foundation connection, or chase a leak at a roof seam on your own. These are structural and moisture-control repairs, and a bad seal lets water into the framing – the most expensive kind of mistake on a prefabricated build. Foundation anchoring and roof-level work carry real risk of injury or long-term damage if done wrong. If your inspection turned up more than a cosmetic issue, call us at (888) 426-8719. We’ll look at it honestly and give you a written price before anything starts.
FAQs

The panels themselves are engineered to last decades, but the seals and connection hardware – the parts that actually need attention – typically need inspection every 7 to 10 years in the Bay Area’s damp winters and dry summers. The temperature and moisture swing is what ages sealant faster here than in a steadier climate. Call (888) 426-8719 for a free estimate on a seal-and-connection inspection.
Often yes. A panel joint or flashing that’s failed can frequently be resealed and re-anchored rather than replaced, which is far less expensive than a full rebuild. Whether repair works depends on how much moisture has already gotten in. We’ll tell you honestly which path is right rather than defaulting to the bigger job. Call (888) 426-8719 to schedule a free assessment.
A localized panel-joint or flashing repair is typically a multi-day job once materials are on hand, not a same-day swap – and a full addition or ADU build runs months. We give you a real timeline and a defined arrival window in writing, so you’re not guessing. Call (888) 426-8719 for a written schedule and price.
We match the part to your module’s label plate and rough-opening dimensions, then source OEM or an exact-compatible equivalent depending on the item – proprietary brackets and flashing go OEM, standard windows and fasteners can use recognized aftermarket brands like KraftMaid, Cambria, or Silestone where a finish element is involved. We’re independent and not affiliated with Dvele, so we source on your behalf. Call (888) 426-8719 for a free estimate and we’ll confirm exactly what your model needs.
Whether your Dvele addition needs a seal-and-connection repair or you’re starting a new build in Sunnyvale, the first step is the same: a written price you can hold us to, a defined arrival window, and a real person on the phone. Call Penhallow Remodeling Sunnyvale at (888) 426-8719 for your free estimate – our technicians bring up to 22 years of experience, our crews are background-checked and uniformed, and a live person answers the phone around the clock.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












