







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Union City, CA
We’re an independent CWS provider serving Union City homeowners, which means we can tell you plainly whether a failing cabinet run deserves new doors or a full replacement. What sets our CWS work here apart is the ground under the kitchen: Union City homes split between mid-century flatland ranches and slope-review hillside builds, and each one treats cabinets and countertops very differently. Call (888) 426-8719 to schedule a free estimate.
Our technicians have up to 22 years of experience with frameless full-overlay plywood-box cabinet lines, shaker and slab door styles, semi-custom vanities, and CWS quartz and granite countertop programs. We cover the whole of Union City under ZIP 94587, from the flats near the Hayward Fault trace up into the eastern hills.
Why Union City Residents Choose Us for CWS Service

Most people who call us have already heard a version of this from someone else: “The boxes are fine, just reface it,” followed by doors that peel again within a year. We don’t work that way. Before quoting anything, we pull a cabinet door, check the box for water damage and racking, and test the hinges and glides. Then we tell you which way the job should go.
We’re an independent CWS service provider. We’re not affiliated with, authorized by, or endorsed by the CWS manufacturer, and we don’t imply any warranty coverage on their behalf. That independence is useful: we can recommend OEM CWS doors and drawer fronts where color and profile matching matter, or quality aftermarket glides and hinges where the OEM part has been discontinued and the original is no longer available.
Every job starts with a written price before any work begins, backed by our 365-Day Done Right Promise. If something fails inside that year, we come back and fix it at no charge. A live person answers our phone around the clock, and our technicians are background-checked and arrive in uniform.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CWS Construction Problems We Solve in Union City
- Thermofoil and painted-MDF door faces peeling at the sink and dishwasher edges. In Union City flats kitchens, fog-season humidity works into the seams of older thermofoil, and the door skin starts to lift along the hottest, dampest line in the room. It’s not a defect in how you clean them. It’s age plus moisture.
- Particleboard sink bases swelling and racking after a slow leak. Common in 1950s-70s ranch tract homes around 94587, where a drip under the trap goes unnoticed for months. The box softens, the drawer no longer closes square, and the whole run looks crooked.
- Drawer glides and hinges failing on full-overlay frameless boxes. Hardware fatigues over years of daily use, and it’s often misread as a “cheap cabinet” problem. Usually the box is fine and the hardware just needs replacing.
- Out-of-square alcoves forcing shimmed, gapped cabinet runs. Mid-century homes move. When an alcove is no longer square, the cabinets get shimmed to fit, and the gaps read as installation error when it’s really wall movement.
- Out-of-level floors and out-of-square walls in hillside homes. In Union City’s eastern hills, installers spend the first hour mapping slope before setting cabinets, because out-of-level substrate throws door reveals and countertop seams off no matter how careful the install.
CWS Service in Union City: What Local Conditions Mean for Your Equipment

Here’s something that doesn’t come up in flat-lot Fremont or Newark the same way. Union City’s eastern hillside custom homes sit on slope-stability-reviewed lots, which means cabinet and countertop installs up there often start with laser-checking out-of-level floors and out-of-square walls before a single box gets set. On the flats, the challenge is different: bay-plain fog and wet winters drive moisture into older cabinets, especially around sink bases and dishwasher alcoves in the Eichler-era and 1950s-70s ranches near ZIP 94587.
That split is real, and it shapes how we quote CWS work. A peeling door over a sound plywood box on a flatland ranch usually means new OEM-matched doors and a rebuilt, sealed sink base, not a tear-out. Up the hill, the first hour goes to substrate mapping. Same brand, two different jobs. Knowing which one you’re looking at before the estimate is half the work. If your home sits near the fault trace or above the flats, fault-zone and slope-stability review can also touch your project’s scope, and we walk through what that means for your timeline during the site visit.
CWS Models & Products We Service in Union City
We work on CWS frameless full-overlay plywood-box cabinet lines, shaker and slab door styles in both painted MDF and thermofoil, semi-custom kitchen and bath vanity lines, and CWS quartz and granite countertop programs. When we quote a repair, we check the box construction first: plywood boxes hold up well to refacing, while swollen particleboard sink bases usually don’t justify the labor.
Parts aren’t kept in local stock. We source OEM CWS doors, drawer fronts and hinges per job when color and profile matching matter, and quality aftermarket glides and hinges where the OEM part has been discontinued. Countertops and backsplashes are quoted separately so the repair-versus-replace call stays honest.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Union City

CWS cabinet and countertop work in Union City runs from a few hundred dollars for hardware and door swaps to full kitchen scope. Below are the ranges we quote most often. Every number is written before work starts, so the figure on day one is the figure on the invoice.
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
What drives the number up or down: whether the boxes are sound, whether the layout is changing, the countertop material, and how much substrate correction the room needs. A hillside install with out-of-level floors costs more in prep than a flatland ranch with a level floor. The free estimate includes a door-and-box inspection, a hardware check, and a written line-item price. Call (888) 426-8719 to book yours.
Serving Union City, CA – Our Local Coverage Area
We serve Union City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Union City
If the underlying box is plywood and dry, refacing with OEM-matched doors is usually the right call; if the sink base has swollen or the layout no longer fits your kitchen, replacement makes more sense. We inspect the box, hardware and moisture damage before recommending, so the answer fits your actual cabinets rather than a sales target. Call (888) 426-8719 to have us take a look.
It can, especially if your home sits near the Hayward Fault trace or you’re adding scope that touches structural elements. Union City runs its own building division with Alquist-Priolo fault-zone and hillside ordinances layered on top, and plan-check familiarity makes a real difference to how quickly a project clears review. We walk through what your specific address triggers during the estimate.
Because the floors and walls up there are more likely to be out of level and out of square, and out-of-level substrate throws door reveals and countertop seams off no matter how careful the cabinet install is. The first hour typically goes to laser-checking and mapping before a single box gets set. That prep is built into the quote, not added later.
Often, yes. If the boxes are sound and the layout works, we can replace doors and drawer fronts, rebuild a bad sink base, and set a new quartz top and backsplash without tearing out the whole room. We quote countertop and backsplash separately so you can see what the scope actually costs.
Bay-plain fog and wet winters drive moisture into older cabinets, especially thermofoil seams at the sink and dishwasher and particleboard sink bases in 1950s-70s ranch tract homes near 94587. A slow drip that goes unnoticed for months will swell a sink base and rack the whole run. If you’re seeing gaps or a drawer that won’t close square, call (888) 426-8719 for a written quote – estimates are free.
Service Areas Near Union City
We also serve homeowners in Fremont and Pleasanton, plus Sunnyvale, Santa Clara, Milpitas and Campbell. If you’re unsure whether your address falls inside our Union City service area, call us and we’ll confirm before we book anything.
You can read more about Union City service area coverage here.
Book Your CWS Service in Union City Today
Whether you’re looking at peeling doors over a sound box on the flats or a hillside install that needs substrate mapped first, the next step is the same: a written price before any work starts. Call (888) 426-8719 for a free estimate. A real person answers around the clock. You can also learn more about our CWS service work.
Written by the team at Penhallow Remodeling Sunnyvale.












