







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Windows & Doors: The Sunnyvale Owner’s Guide
We replace and service CWS windows and doors for Sunnyvale homeowners, and most CWS-compatible window and door work here runs from $4,500 to $15,000 for standard replacements, with impact-rated units at $8,000 to $25,000. We’re an independent service provider, not affiliated with CWS, and we’re straightforward about what we can and can’t get: we don’t stock CWS parts ourselves, but we can usually source what your unit needs and install it correctly. Free estimates, written before anything starts.
Most Sunnyvale owners find us the same way. A CWS window that used to slide quietly now sticks halfway up. A door latch that clicked for years suddenly needs a shoulder behind it. Or a foggy double-pane shows up one morning after a cold snap and never clears. These are the first signs, not the last ones.
Key Takeaways
- We install CWS-compatible windows and doors; we don’t stock or carry CWS parts on a truck.
- Sunnyvale’s mild winters and dry summers are kind to frames but hard on weatherstripping, gaskets and sealants.
- Written price before work starts, guaranteed on every job. No-surprise billing.
- Most parts can be sourced in days, not weeks, once we’ve identified your exact model.
Which CWS Models This Applies To

CWS made windows and doors across several product lines over the years, and the part that fits one does not fit another. The single most common mistake we see is a homeowner ordering a replacement sash or roller based on a photo or a width measurement alone. CWS sash profiles and hardware vary by series, and a roller or latch that’s visually identical to a 1/16-inch can be the wrong one.
Here’s how to identify what you actually have before anything gets ordered. Look for the manufacturer’s label, usually on the window frame jamb, inside the head track, or on the door edge behind the hinge side. That label carries the model or series number. If the label is gone, we take measurements at the frame, not the sash: track width, sash height, glazing thickness and hinge spacing. A quick check for the older CWS aluminum-frame lines is the frame corner joint; welded corners point to one family of models, screwed corners to another.
On the OEM-versus-aftermarket question, CWS-specific parts are sometimes still available through specialty suppliers, but not always. Where the OEM part is discontinued, a quality aftermarket equivalent made to the same spec is the honest answer: same dimensions, same function, and often better materials than the original 1990s-vintage part. We won’t install an aftermarket part that doesn’t match the original tolerances. We’ll tell you when the real fix is a full unit replacement, and we’ll put that in writing before you decide.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Windows & Doors Is Failing
- A window that sticks or drags in the track. Usually worn rollers or a bent roller carriage, or the track itself has collected grit and oxidized aluminum debris. In Sunnyvale, the dry summer dust loads up tracks faster than most people expect.
- Fogging or condensation between the panes. The insulated glass seal has failed, and moisture is getting between the sheets. This one doesn’t fix itself; the sealed unit needs replacing, not just a wipe-down.
- A door that won’t latch without a push or lift. The strike plate has shifted, the hinge screws have loosened, or the door has swelled and settled out of square. On CWS doors, worn roller or latch hardware is the usual culprit before frame movement becomes the answer.
- Drafts or daylight around the frame edges. Weatherstripping and gaskets have compressed or gone brittle. Sunnyvale’s temperature swings between cool mornings and warm afternoons work on those seals year-round.
- Visible water staining or softness on the interior sill. This is the one to act on quickly. It usually means the exterior sealant or flashing has failed and water is getting behind the frame. Left alone, it reaches the framing.
Replacement Cost & What’s Included

For standard window replacement in Sunnyvale, installed prices run $4,500 to $15,000 for a typical multi-window job. Impact-rated window installation runs $8,000 to $25,000. Door replacement of a CWS unit, including sourcing the compatible part or full replacement unit and installing it correctly, is quoted per job based on size, glass type and hardware. The number on day one is the number on the invoice; we give a written price before work starts, and it holds.
What’s in the range: the parts or replacement unit, labor, removal of the old part, site cleanup, and our written guarantee on the work. What pushes the high end: impact-rated glass, custom frame sizes, or a door that needs the opening reframed because the original install was out of square. We’ll tell you which category your job falls into, free, before you commit to anything. The 365-Day Done Right Promise covers every job; if something fails inside that year, we come back and fix it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check track condition, clean out grit from rollers, confirm the label and model number, and photograph the part for identification. That’s useful work and we’ll take your photos as a starting point. What you shouldn’t tackle: replacing an insulated glass unit (the seals are vacuum-tight and need a proper press), rehanging a door that’s out of square (frame movement is often structural), or repairing water damage behind a sill. Each of those involves either a safety risk on a ladder or a risk of making a bigger problem. If you’re not sure what you’ve got, call us at (888) 426-8719 and describe the symptom. We’ll tell you whether it’s a part or a frame issue, and what the honest fix is.
FAQs

Original CWS windows in the Sunnyvale area typically give 20 to 30 years before hardware wears or glazing seals fail. Sunnyvale’s climate is easier on frames than coastal salt air, but the dry heat still attacks seals and weatherstripping every summer. If your CWS unit is past 25 years, parts can get scarce and full replacement becomes the value call. Call (888) 426-8719 for a free assessment before that decision gets expensive.
Often, yes. Rollers, latches, weatherstripping and gaskets are replaceable on many CWS series. A foggy sealed unit is also sometimes repairable with a new insulated glass unit without replacing the whole window. The one case where repair rarely makes sense is a frame that’s out of square or a sill with water damage behind it. We’ll tell you honestly which one you have. Estimates are free; call us.
Most single-window hardware swaps take one to two hours. A door latch or roller replacement is typically the same afternoon. Full window or door unit replacement runs three to six hours per unit depending on the opening. We give a real arrival window, and a live person answers the phone if something changes. Call (888) 426-8719 to schedule.
We identify the exact CWS model from the label or from measurements, contact suppliers for the OEM part or a spec-matched aftermarket equivalent, and confirm fit before scheduling. We don’t stock CWS parts and we don’t carry them on a truck; that keeps the process honest for the minority of CWS units that need one. For units a matched part won’t fix, we’ll quote a full replacement. Free estimate, written, even if the answer is “you don’t need us.”
Get Your CWS Windows and Doors Straightened Out
If you’re staring at a CWS window that won’t slide, a door that won’t latch, or a foggy pane that’s been bugging you since spring, call Penhallow Remodeling Sunnyvale at (888) 426-8719 for a free estimate. We’ll identify what you have, tell you honestly whether it’s a part or a replacement, and give you a written price before a single tool comes out of the bag. Our technicians bring up to 22 years of experience to the job, we’re background-checked and uniformed, and a live person answers the phone 24/7. We also handle KraftMaid, Cambria and Silestone on other projects, and every job carries the 365-Day Done Right Promise in writing.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












