







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Fence Installation: The Sunnyvale Owner’s Guide
CGI fence installation in Sunnyvale typically costs $3,500 – $9,000 fully installed, depending on fence height, linear footage, materials, and the condition of your existing footings. We install CGI-compatible fence systems and match your remaining panels and panels’ finish so the new section reads as part of the original run. A single panel replacement can often be scheduled within the same week once materials are confirmed.
Owners usually find the problem the same way: a gate that drags after two winters, a post that moves when you lean on it, or a picket line that has gone wavy along the sidewalk. In Sunnyvale’s clay-heavy soils, most fence failures start below grade, not at the panel. One post starts to lean after wet-season ground movement, and the whole run follows it. What looks like a failed panel is often a footing problem wearing a panel costume.
Which CGI Models This Applies To

CGI’s fence line spans several distinct systems, and the installation method differs by series, not just by color. The company’s residential lines cover privacy, ornamental, and pool-code configurations, and each has its own post size, rail spacing, and hardware set. The panel you see at the home center may not be the panel on your property.
The first thing we do on any CGI job is check the model label, usually a small sticker on the inside face of a rail or one of the posts, near the gate hinge. That label tells us the series and the panel width. If it’s sun-bleached or gone, we measure rail height and post width instead: a 1-7/8-inch post points to one system, a 2-3/8-inch post to another, and the difference matters when the replacement has to lock into the existing run without a visible seam.
On the OEM-versus-aftermarket question, CGI panels can be matched with a quality aftermarket equivalent for many common configurations, and that’s often the right call when you need one section and the OEM lead time stretches past a weather window. The tradeoff: aftermarket pickets can run a slightly different shade after a couple of years in the California sun, and they may not share the same hardware profile. When the fence is visible from the street or runs alongside a neighbor’s, we lean OEM for color match. When a run is in the side yard or behind a screen, aftermarket is a fair trade for the money. We’re an independent provider and not affiliated with CGI, so our estimate tells you plainly which parts are OEM and which aren’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Fence Installation Is Failing
- Posts leaning after rain. Sunnyvale’s wet season swells the soil around the footing, and a post packed into gravel without a proper concrete collar will shift. Once one goes, the adjacent panels pull at the rail connections.
- Rails rattling or popping out of the post. A rail that won’t stay seated usually means the punched hole in the post has wallowed out, or the fastener has backed off. This is a rail-and-hardware problem, not a panel problem.
- Gates that drag or won’t latch. Most gate failures trace to the hinge post, not the hinges. If the post has tilted even a quarter inch, the gate swings out of plumb and the latch no longer lines up.
- Panels with rust staining at the fasteners. Galvanized fasteners can develop surface rust in salt-air towns closer to the Bay, and those stains are the first sign that water is getting behind the joint and into the panel.
- Pickets that look wavy along the top. A wavy picket line is almost always a footing issue showing up two panels downstream. The picket isn’t bent; the posts holding it have moved.
If you’re seeing two or more of these at once, the fence run is telling you its footings need a look, not just its panels.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Fence installation in Sunnyvale for a CGI-compatible system runs $3,500 – $9,000 installed. Here’s what drives the number up or down:
| Scope | Typical Range |
|---|---|
| Single section replacement (panel + hardware) | $350 – $900 |
| Gate replacement (frame, hardware, latch) | $700 – $2,000 |
| Full residential run, standard height | $3,500 – $9,000 |
| Footing repair / post reset (per post) | $250 – $600 |
What moves you toward the top of the range: taller privacy panels, more linear footage, footing work on soft clay, and the extra labor of matching a sun-faded existing finish. Every job gets a written price before work starts, so the number you see on the estimate is the number on the invoice. Parts and labor are broken out line by line. The work is backed by our written guarantee and the 365-Day Done Right Promise: if a post we set or a panel we hung fails inside that year, we come back and fix it at no charge, no service-call fee.
DIY or Call Us?
A homeowner can safely handle a few things on a fence: clearing vegetation away from the base, wiping down panels to spot rust stains early, tightening the screws on a gate latch, and checking whether a gate drags on the latch bolt or on the ground. Those checks tell you a lot about where the real problem sits.
Where DIY goes wrong is the footing. Digging out and resetting a fence post by hand in Sunnyvale clay is hard work, and a post set with a bag of quick-set and an hour of patience usually looks fine until the next wet season. Pulling a post isn’t dangerous the way a garage-door spring is, but a 6-foot privacy panel is heavy, awkward, and wants to fall on the person holding it. A fence that’s holding up a gate or sitting near a property line is not a weekend project to learn on.
Call (888) 426-8719 and we’ll walk you through what we’re seeing, what the part costs, and what the install takes. Our technicians have up to 22 years of experience and they’ll tell you honestly whether you need a full run or one section reset.
FAQs

A properly set CGI fence system lasts 15 – 20 years in Sunnyvale’s climate, and the panels usually outlast the footings. The California sun fades the finish and the wet season works on the posts, so the run’s real lifespan is decided by the footing quality and how well the rails stay seated at the posts.
Often yes. A single leaning post, a rattling rail, or a dragging gate is a repair, not a replacement. We look at the footings and the rail connections first, and if two or three posts are sound you’re likely looking at a repair. If the majority of posts have moved, replacement starts to make economic sense. Call (888) 426-8719 for a free estimate and we’ll tell you which one you’re facing.
A single section replacement is usually a one-day job. A full residential run takes two to four days, depending on linear footage and how many posts need footing work. We confirm the arrival window before the start date, and we keep it.
We source CGI-compatible parts through established trade suppliers, matching your model label or, where the label is gone, the post and rail dimensions. We confirm the part before install so you know what’s arriving, what it costs, and whether it’s OEM or a quality aftermarket equivalent. We don’t stock parts and we don’t carry parts on a truck: every order is made for your job.
We’re an independent provider and not affiliated with CGI. We also install cabinetry and surface brands like KraftMaid, Cambria, and Silestone for homeowners whose remodel runs alongside the fence work.
If your CGI fence is leaning, rattling, or not keeping out what it should, the next step is a free estimate. Call (888) 426-8719 and a real person will answer, 24/7, and get you a written price before any work starts. Every job is backed by our written guarantee and the 365-Day Done Right Promise. Background-checked, uniformed technicians arrive in the window we give you, and we leave the yard cleaner than we found it. That’s the Kingswell Way, and it applies to every job we take on.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












