







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boxabl Driveway & Pavers: The Sunnyvale Owner’s Guide
We install Boxabl-compatible driveways and paver systems for Sunnyvale homeowners, and a typical installed paver driveway runs $7,000-$18,000 depending on square footage, base prep and paver choice. Concrete driveways land at $4,500-$12,000, and asphalt paving at $3,500-$9,000. We’re an independent provider, not affiliated with Boxabl, and we’ll give you a written price before any work starts.
Owners usually don’t think about the driveway until it starts talking back. You notice a hairline crack that widens over a wet winter. Water pools toward the Boxabl foundation instead of away from it. A section of pavers shifts after a heavy rain, or the asphalt edge crumbles where the delivery truck backed in. In Sunnyvale, where clay-heavy soil and winter rain combine, a driveway that was fine in summer can show real problems by February. Call (888) 426-8719 and we’ll come look at it with you.
Which Boxabl Models This Applies To

The driveway and paver work isn’t a Boxabl-manufactured part the way a window or a panel is. It’s the sitework the unit sits on, and that’s exactly where the compatibility question gets interesting. A Boxabl Casita arrives as a folded steel-and-concrete module, and its load path lands on specific points. Your driveway, apron and paver approach have to be graded and built to carry that load without settling unevenly under it.
Here’s how to identify what you actually have before we quote anything. Look for the pad or foundation drawings that came with the delivery packet. They’ll show the anchor points and the finished grade. Measure the slope from the street to the unit: a Casita apron typically needs to drain away from the foundation at roughly a 1-2% grade, and if your current driveway is flat or pitched toward the unit, that’s a red flag. The OEM-versus-aftermarket decision for a driveway is really a materials decision. There’s no “Boxabl paver.” There’s the paver that holds up under a folded steel module in Bay Area soil and the one that doesn’t. We install Belgard and Unilock pavers because the base prep those systems require is the same base prep a Boxabl pad needs: compacted aggregate, proper subgrade, and a plan for water.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boxabl Driveway & Pavers Is Failing
Most Sunyvale driveway failures we see started long before the crack appeared. Here are the symptoms and what’s usually underneath them.
- Cracks that reappear after patching. A crack that comes back in the same spot is telling you the subgrade beneath it is moving, not that the patch was bad. Clay soil expands and contracts with our wet-dry cycles, and a thin repair just rides on top of that movement.
- Ponding near the Boxabl foundation. Water standing within a few feet of the unit means the grade has settled below where it should be. Over a couple of seasons that’s moisture against the base of your module, which is the last thing you want.
- Pavers that rock or spread at the edges. Loose pavers usually mean the edge restraint failed or the bedding sand washed out. Both trace back to drainage and base compaction, and both get worse every rainy season.
- Crumbling asphalt at the apron. The transition where the driveway meets the street or the pad takes the most load. If it’s raveling, the asphalt layer is too thin or the base beneath it was never built for the box truck that delivered your unit.
- Uneven settling under the delivery path. If you can see a dip where the module was hauled in, the soil was compacted for a passenger car, not a loaded transport. That dip will keep sinking.
If two or more of those sound familiar, the fix is usually base work, not a cosmetic patch. Call (888) 426-8719 and we’ll tell you honestly which it is.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here are the installed ranges we quote in Sunnyvale. These are the number you can hold us to, written before work starts, not a range that moves after demo.
| Service | Installed Range |
|---|---|
| Paver driveway installation | $7,000-$18,000 |
| Concrete driveway installation | $4,500-$12,000 |
| Asphalt driveway paving | $3,500-$9,000 |
| Driveway replacement | $5,000-$14,000 |
| Driveway sealing | $250-$700 |
| Paver patio installation | $3,500-$11,000 |
What drives the number up or down: total square footage, how much excavation and haul-away the old surface needs, base depth (clay soil near the Bay can demand a deeper aggregate base), paver selection, and whether drainage or a trench drain has to be added. A sealing job on a sound driveway is a few hundred dollars; a full replacement with base correction is the top of the range. Every quote includes labor and materials, and every job carries our written guarantee plus the 365-Day Done Right Promise. We source pavers from Belgard and Unilock, and concrete and asphalt from recognized suppliers, so the product behind the guarantee is as solid as the promise.
DIY or Call Us?
Some things you can check yourself, and we’d rather you did. Walk the driveway after a rain and note where water pools. Look at the edge restraint along the pavers: if it’s separating, that’s a real finding. Check the base of your Boxabl unit for any sign of moisture or settling. Photograph the cracks with something for scale.
What we’d steer you away from is the repair itself. Driveway and paver work is heavy, excavation-dependent, and unforgiving of a bad base. A DIY patch over a moving subgrade fails within a season, and re-doing it costs more than doing it right once. There’s no high-tension or electrical danger here, but there is a real risk of throwing money at a surface that was never the problem. That’s the conversation worth having. Call (888) 426-8719 and we’ll give you a straight read and a free estimate.
FAQs

A properly built paver driveway typically lasts 25 to 30 years, and concrete 25 to 30 with good base and drainage. The lifespan is set by the base and the drainage, not the surface material. In Sunnyvale’s clay soil, a driveway built without proper subgrade prep can fail in under 10 years. Call (888) 426-8719 for an exact quote on your situation – estimates are free.
Sometimes yes. Localized cracks, a single settled paver section, or a worn seal coat can often be repaired rather than replaced. If the failure is widespread settling or water running toward the Boxabl foundation, a repair won’t hold and replacement is the honest answer. We’ll tell you which one you’re looking at during the estimate. Call (888) 426-8719 to schedule it.
A typical paver driveway replacement takes 3 to 5 working days, and a concrete driveway 2 to 4 days plus cure time. Excavation, base prep and drainage add time; weather can too. We give you a defined arrival window and a clean job site as part of The Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it.
We source pavers from Belgard and Unilock and concrete and asphalt from recognized suppliers, and we don’t claim to stock parts or carry them on a truck. Materials are ordered for your job, and the written price reflects exactly what’s being installed. The same standard applies across our cabinet and countertop work, where we install KraftMaid, Cambria and Silestone alongside the pavers. Every job is backed by our 365-Day Done Right Promise: if it’s not done right, we come back and fix it at no charge.
Ready to stop guessing about your driveway? Call Penhallow Remodeling Sunnyvale at (888) 426-8719 for a free estimate. A live person answers around the clock, and you’ll get a written price before any work begins.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












