







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Home Additions & ADU: The Sunnyvale Owner’s Guide
Boral-compatible home additions and ADU tie-ins installed in Sunnyvale typically run $45,000 – $130,000, and a full ADU build runs $90,000 – $220,000; both are planned projects scheduled with a written price up front, not same-day work. Most Sunnyvale owners find out something has gone wrong with a Boral masonry or cladding component when a hairline crack spreads across a chimney chase, a patio-to-addition junction pulls apart, or a door starts sticking where the wall has shifted. Penhallow Remodeling Sunnyvale is an independent service provider and is not affiliated with Boral; we build additions and ADUs using Boral-compatible materials alongside KraftMaid, Cambria and Silestone finishes.
Which Boral Models This Applies To

Boral makes masonry and manufactured stone, roof tile, brick and block, and trim systems, and the part number that matters depends on which product line your addition or ADU was built with. The common lines we see on Sunnyvale jobs are Boral Cultured Stone (now marketed under the Cultured Stone brand), Boral Versetta Stone panels, Boral Brick, and Boral’s clay roof tile. Each one carries its own sizing and attachment spec, so a chimney cap, corner return, water-table piece or mortar-matching touch-up is not interchangeable between lines.
The fastest way to identify what you have is to look at the original build drawings or the permit set filed with the City of Sunnyvale, then measure an existing unit – stone veneer flats run in standard nominal heights, and brick coursing is fixed once the wall is laid. If you don’t have the paperwork, a clear photo of the piece next to a tape measure gets us most of the way there.
The OEM-versus-aftermarket call for Boral is genuinely worth thinking through: for exposed exterior units on a Sunnyvale addition, an exact-line match protects color, texture and code compliance, while a quality aftermarket equivalent can work for a concealed or mortar-bedded piece where the surface isn’t the point. We quote both so you can see the difference in writing before anything is ordered.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Home Additions & ADU Is Failing
Boral stone, brick and tile hold up well when they’re detailed correctly, but almost every failure we see in Sunnyvale traces back to what’s behind and around the unit, not the unit itself. Here’s what to watch for.
- Hairline cracks spreading from a corner or opening. A small crack that grows over a season usually means the substrate shifted or the control joint was missed – the stone is just reporting what happened underneath it.
- Efflorescence (white powdery bloom) that keeps returning. This is moisture migrating through the masonry and drying out on the face. In Sunnyvale’s wet winters and dry summers, the wet-dry cycle drives it, and repeated bloom means water is getting in where it shouldn’t.
- Discoloration or dark streaks near the base and roofline. Streaking points to water tracking behind the veneer or a flashing detail that’s failing. Left alone, it works its way into the framing and sheathing.
- Loose or hollow-sounding units. Tap a suspected piece gently – a dead, hollow sound means the bond has broken and the unit is sitting on its ties rather than the mortar bed.
- Spalling or a chalky face that flakes off. This is freeze-thaw and salt damage at the surface. It’s a lifespan reality in California exteriors, and once a face is spalling, patching is a stop-gap, not a fix.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Because “Boral part replacement” on a home addition or ADU ranges from a single stone unit to a full wall rebuild, we price it by scope. For context on the larger job it belongs to, a full home addition in Sunnyvale runs $45,000 – $130,000 and a full ADU runs $90,000 – $220,000; a targeted masonry or cladding repair sits well below that.
- Single-unit or small-area replacement (stone, brick or trim piece): $400 – $2,500, including matching, removal and re-bedding.
- Wall or chimney-face section rebuild: $3,500 – $12,000, including substrate repair and flashing.
- Full addition or ADU cladding/masonry scope: priced inside the $45,000 – $130,000 addition range.
What drives the number up or down: whether the original product line is still available, how much hidden substrate damage we find after opening the wall, and access at height. Every quote is written before work starts, and the price on day one is the price on the invoice.
DIY or Call Us?
You can safely photograph the failing piece, measure it, tap for hollow spots and note where water is showing up – that’s useful information for a quote and it won’t hurt anything. What we don’t recommend is trying to re-bed a stone unit or rebuild a flashing detail yourself, because the visible part is the easy part. The work that matters is the substrate (the layer that carries the unit), the weep system that lets water out, and the tie pattern that holds everything in place. Get those wrong and the new piece cracks again within a season, which is exactly the six-week repair most Sunnyvale owners are trying to avoid repeating. Call (888) 426-8719 for a free estimate and we’ll take a look.
FAQs

How long does Boral stone or brick on a home addition last in Sunnyvale? Properly detailed, Boral masonry and cladding can last decades – often 30-plus years on a well-flashed wall. What shortens it in Sunnyvale is water: if flashing, weep holes or the control joints fail, the lifespan drops fast regardless of the product. Call (888) 426-8719 for a free estimate if you’re seeing water signs.
Can the failing piece be repaired instead of replaced? Often yes – a single cracked or hollow unit can be cut out and re-bedded, and a failed joint can be repointed. Repair only works when the substrate and flashing are still sound; if the damage traces deeper, replacement is the honest answer, and we’ll tell you which one you’re looking at in writing.
How long does the swap take? A single-unit repair is usually a one-day visit. A wall or chimney-face section rebuild runs three to seven days once it’s scheduled and materials are in hand. Full addition or ADU cladding timelines are set in your written schedule before work starts.
How do you source the Boral part? We match against your original build drawings or permit set where possible, and confirm against measured dimensions and product photos when the paperwork is gone. If the exact Boral line is discontinued, we present a like-for-like equivalent and the price difference in writing so you can choose.
Will the price change once work starts? No – the written price you receive is the number you pay. If we open a wall and find something genuinely different behind it, we stop, show you photos and get your approval before doing anything that would change the scope. The 365-Day Done Right Promise backs the finished work: if it fails inside the year, we come back and fix it at no charge, with a free return visit if a repair fails.
Ready to move on that failing stone or cladding? Call (888) 426-8719 for a free estimate from Penhallow Remodeling Sunnyvale. A live person answers 24/7, our technicians arrive background-checked and in uniform, and every quote comes in writing with the 365-Day Done Right Promise behind it – the same standard across the Kingswell family of companies under The Kingswell Way. We also work with KraftMaid, Cambria and Silestone when your addition or ADU needs cabinetry and countertops to match.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












