







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Fence Installation: The Sunnyvale Owner’s Guide
Fence installation with Boral composite systems in Sunnyvale typically runs $3,500 – $9,000 installed, depending on linear footage, gate count, and whether old fencing has to come out first. We install Boral-compatible fencing and repair failed sections across Sunnyvale, and we can usually give you a written price within a day of seeing the yard. Most owners discover the problem the same way: a post that’s started to lean after a wet winter, a gate that drags on the concrete, or boards pulling free at the rail line while the fence still looks fine from the street.
Which Boral Models This Applies To

Boral’s composite and vinyl fence lines show up in a handful of common profiles, and the part that fails is almost always determined by which one you have. Before you order anything, confirm three things on the existing fence: the rail-to-post connection style, the rail spacing (center-to-center, measured in inches), and the picket or board thickness. Boral systems use proprietary brackets and channel profiles that vary by line, so a bracket that fits one series won’t seat correctly on another. Look for a stamp or label on the post cap or inside the gate frame, and if there isn’t one, measure the rail profile with a caliper at the slot. A quarter-inch difference in rail thickness is the difference between a fitting that locks and one that rattles loose in a season.
On the OEM-versus-aftermarket question: matching the original Boral profile is worth it when the fence run is visible and the fit matters, particularly on gate hardware and rail brackets that bear load. For hidden fasteners and standard pickets, a quality aftermarket equivalent often performs the same and costs less. We’re an independent service provider and not affiliated with Boral, so we’ll tell you plainly which parts need to be the real thing and which don’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Fence Installation Is Failing
- Posts leaning after rain. Sunnyvale’s clay-heavy soils swell through the wet season and shift posts set in shallow footings. If a post moves but the panel is sound, the footing is the problem, not the fence.
- Gate sagging into the strike side. This is usually a fatigued hinge or a hinge post that’s lost its footing. A dragging gate loads the latch and the frame, and left alone it cracks the stile.
- Boards lifting off the rail. Fasteners backing out of composite rails point to thermal movement from Sunnyvale’s hot summer afternoons and cool nights. Composite expands and contracts more than the wood it replaced.
- Rails bowing between posts. An undersized rail span, or a rail that’s absorbed moisture at a cut end, will sag. On Boral systems the rail span is spec’d for a reason, and stretching it is what causes this.
- Discoloration that won’t wash off. Chalking or fading on composite panels is a surface failure, not dirt. It tells you the protective finish has broken down and the board is on borrowed time.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Fence installation of a Boral-compatible run in Sunnyvale sits in the $3,500 – $9,000 range for a typical residential yard. Here’s what moves the number up or down:
| Line item | Typical range |
|---|---|
| Replace a failed gate (frame, hinges, latch) | $400 – $900 |
| Reset a leaning post with new footing | $300 – $700 each |
| Replace a panel section between posts | $250 – $600 |
| Full Boral-compatible fence run installed | $3,500 – $9,000 |
The range depends on linear footage, how many posts need new footings in Sunnyvale’s soil, gate count, and whether the old fence has to be torn out and hauled. You get a written, line-item price before any work starts, so the number on day one is the number on the invoice. Work is covered by our 365-Day Done Right Promise, in writing.
DIY or Call Us?
You can safely check a few things yourself: walk the fence line and note which posts move when pushed, measure the rail spacing, confirm whether the gate is binding at the latch or sagging at the hinge, and look for a model label. Replacing a standard picket or swapping a hinge is a reasonable weekend job if you’ve got the tools and a helper.
Where it goes wrong is the footing and the load path. A leaning post usually needs the footing reset or replaced, and a fence that’s pulled and re-hung wrong will fail again by the next wet season. Fence work also carries genuine injury risk when panels and posts come down under tension, and the footing dig is where most DIY jobs stall out. If the post is moving or the gate frame is cracked, that’s the point to call us at (888) 426-8719 for a free estimate rather than muscle through it.
FAQs

You can expect 15 to 25 years from a well-installed Boral composite system in Sunnyvale’s climate, with the footings and post condition being the real limit rather than the panels. Composite panels resist rot and insects well, but they still move with temperature, so the fasteners and rail connections are what typically need attention first.
Often yes. A single moved post, a failed gate hinge, or one lifted board can usually be repaired without tearing out the run. When several posts are moving or the rails have bowed, repair stops making economic sense and a section replacement is the better call.
A single gate or post reset is a same-visit job, usually a few hours. Replacing a full panel section takes half a day to a day. A complete fence run depends on footage and post footings, and we give you the real schedule with the written price, not a verbal guess.
We identify the model from the label or by measuring the rail profile and bracket style, then source the matching part from our trade suppliers. If an exact OEM match isn’t needed, we’ll say so and offer the aftermarket equivalent with the cost difference spelled out. Call (888) 426-8719 for a free estimate and we’ll confirm what your fence needs.
Whether it’s a leaning post, a dragging gate, or a full Boral-compatible run you want done right the first time, call Penhallow Remodeling Sunnyvale at (888) 426-8719 for a free estimate. You’ll get a written price before any work starts, background-checked and uniformed technicians on the job, and our 365-Day Done Right Promise backing the work.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












