







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Blanco Home Additions & ADU: The Sunnyvale Owner’s Guide
We handle Blanco-related work in Sunnyvale on home additions and ADUs, and installed costs for an addition typically land between $45,000 and $130,000, while a full ADU build runs $90,000 to $220,000. If you’re landing here because a Blanco fixture or finish detail in your addition or ADU project is leaking, loosening, or failing to match, you’re in the right place. Most Sunnyvale owners discover the problem the same way we do: a slow drip under a Blanco sink in the new kitchenette, a glaze issue on a Blanco fireclay farmhouse sink, or a spec mismatch discovered at final inspection when the wrong model number shows up on the plans.
We’re an independent remodeling contractor. We install and service Blanco products; we’re not affiliated with Blanco. Our technicians have up to 22 years of experience, and every job comes with a written price before work starts and our 365-Day Done Right Promise in writing.
Key Takeaways
- Blanco-related additions and ADU work in Sunnyvale runs $45,000 – $130,000 for an addition, $90,000 – $220,000 for a full ADU.
- The most common failure we see is a Blanco sink or fixture specified in the ADU plan that doesn’t match the model actually ordered.
- Every project gets a written price up front and the 365-Day Done Right Promise.
- Call (888) 426-8719 for a free estimate; a live person answers around the clock.
Which Blanco Models This Applies To

Blanco isn’t a single product line, so pinpointing “which Blanco” matters more here than with most fixtures. In Sunnyvale additions and ADUs, the Blanco items that show up most are kitchen sinks (the DIAMOND, IKON, and PRECIS series), faucets (the LINUS, ARTONA, and EMPRESSA lines), and the soap dispensers and accessories that pair with them. Each series has its own cutout dimensions, deck thickness requirements, and mounting options, so a DIAMOND 1¾ bowl will not drop into the same rough opening as a PRECIS double bowl.
Here’s the compatibility gotcha we run into on Sunnyvale ADU plans: Blanco model numbers look nearly identical between silgranit composite and stainless, and a spec sheet that reads “Blanco 441286” can be either the sink you want or its mirrored-bowl twin depending on the suffix. When we build a quote, we pull the label from inside the cabinet door of your existing unit or the model stamped on the sink rim, cross-check the cutout measurement against the mounted base cabinet, and confirm the drain board orientation before anything is ordered. We don’t carry parts on a truck or stock Blanco locally; every part comes to the job matched to your exact model.
On the OEM-versus-aftermarket question for Blanco specifically: for sinks and faucets, we stick to OEM because the warranty and the finish matching live with the original manufacturer. For mounting hardware, supply lines, and gaskets, a quality aftermarket equivalent is fine and often faster to source. We name it in writing on the quote either way. If your addition also touches KraftMaid or Wellborn cabinetry, Cambria, Silestone, or Caesarstone counters, we coordinate those finishes in the same scope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Blanco Home Additions & ADU Is Failing
Start with the sink. A Blanco silgranit sink that’s been in a Sunnyvale addition through two or three summers shows its age first at the drain flange: mineral build-up from hard local water works its way under the seal, and the drip only appears when the bowl is full. The fix is usually a new flange and gasket, not the sink. Here are the five symptoms we see most.
- Slow drip under the Blanco sink in the ADU kitchenette. The drain flange or tailpiece seal has failed. Hard water in Sunnyvale accelerates it. Usually a same-visit repair.
- Faucet handle feels loose or sticks. The cartridge in a Blanco LINUS or ARTONA has worn. Replacement cartridges are model-specific, so the model number off the faucet base matters.
- Farmhouse sink pulling away from the counter. The apron-front mounting bracket or the undermount clips have loosened. Common when an ADU sink was set into a thinner counter substrate.
- Spec mismatch on the ADU final inspection. The Blanco fixture installed doesn’t match the one on the stamped plans. This one delays your certificate of occupancy, so it’s worth catching before the inspector does.
- Glaze crazing or staining on a fireclay Blanco sink. Exposure to abrasive cleaners or acidic water. It’s cosmetic until the glaze cracks through, then it becomes a replacement decision.
If the symptom is water pooling near a Blanco fixture in a new addition, shut off the supply valve under the sink and call us before running more water. Slow leaks behind cabinets are the ones that cause substrate damage and get expensive.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed Blanco home addition and ADU work in Sunnyvale runs from $45,000 to $130,000, and the range depends on footprint, structural work, and how many Blanco-specified finishes are in the plan. Here’s how the pricing breaks down for the pieces most owners want to see as a line item:
| Item | Installed range |
|---|---|
| Home addition (Blanco finishes included) | $45,000 – $130,000 |
| ADU construction (Blanco finishes included) | $90,000 – $220,000 |
| Garage conversion to ADU | $30,000 – $80,000 |
| Bathroom remodel within the addition | $9,000 – $28,000 |
What drives the number up: structural changes, permit scope, elevated ceilings, and premium Blanco series like fireclay farmhouse sinks that require custom cabinetry work. What keeps it down: working within existing footprint and standard cutouts. Every quote is a written line-item price before any work starts, and it’s the number on the invoice. Parts are itemized separately from labor so you can see exactly what the Blanco hardware and installation costs.
Every job is covered by our 365-Day Done Right Promise: if something fails inside twelve months, we come back and fix it at no charge. If the repair fails again, we return for a free second visit. No service call fee, no re-inspection charge.
DIY or Call Us?
Some of this is safe to handle yourself. You can shut off the supply valve and check the model label inside the cabinet, photograph the existing Blanco sink from underneath, and measure the cutout before you call. For a faucet, replacing a worn aerator screen is fine. For a soap dispenser that won’t seat, taking it off to inspect the seal is fine.
Where DIY goes wrong: anything involving water lines to a Blanco fixture in a new ADU, and anything involving the mounting hardware on an undermount or farmhouse sink. A sink that lets go because a clip was tightened wrong does counter-level damage in a matter of seconds. And on the ADU spec-mismatch problem, no amount of DIY fixes a model-number discrepancy that will stop your final inspection. Those three tasks we do. Call (888) 426-8719 and a real person answers, night or day. Estimates are free.
FAQs

A Blanco silgranit sink typically gives you 10 to 15 years with normal care in a Sunnyvale climate, and a Blanco faucet cartridge about 5 to 7 years before it starts to stick or drip. The silicon Valley’s hard water is the main accelerator: it works on the seals first, so the flange and gasket are what you’ll replace before the sink itself. Call (888) 426-8719 for an exact quote on your model; estimates are free.
Yes, in most cases it can. Drain flanges, gaskets, faucet cartridges, and aerators are all repairable without pulling the sink, and that’s the option we quote first. What can’t be repaired is physical damage to a silgranit or fireclay bowl like a crack through the base, or a spec mismatch where the installed model differs from the plan. Repairs carry a written guarantee, and if the repair fails we come back free. Call (888) 426-8719 to schedule.
A faucet swap runs about 1 to 2 hours and a sink replacement is typically a half day once the correct part is on site. The wildcard is part lead time: if your Blanco model is a special-order series, we tell you the timeline in writing before we commit to an install date. We’ll give you the written price and the arrival window at the same visit. Call (888) 426-8719 for a free estimate.
We identify your exact Blanco model from the label inside the cabinet, the model stamp on the rim, or the original ADU plan set, then order the matching OEM part. We’re an independent contractor and not affiliated with Blanco, so we buy the part through authorized channels and put the part number on the written quote. You’ll see exactly what you’re paying for before anything is ordered. Call (888) 426-8719 and we’ll walk through your model.
If a Blanco fixture or finish detail in your Sunnyvale addition or ADU project has failed, or you’re planning an addition and want the parts and installation priced honestly up front, call Penhallow Remodeling Sunnyvale at (888) 426-8719 for a free estimate. We answer 24/7, we give you a written price before any work starts, and every job is covered by the 365-Day Done Right Promise – if it’s not done right, we make it right, in writing.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












