







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Kitchen Remodeling: The Sunnyvale Owner’s Guide
If your Barrette kitchen components are failing, we install Barrette-compatible cabinetry, panels, and trim for Sunnyvale homeowners, with kitchen remodels typically running $14,000 – $45,000 depending on layout, cabinet line, and countertop material. Cabinet installation on its own runs $4,000 – $13,000. Most Sunnyvale owners discover a Barrette failure the same way: a drawer that sticks past mid-travel, a door that sags at the hinge corner, or a face-frame section that softens to the touch near the sink. Barrette cabinets themselves are the common thread, and the failing part is usually the hardware or the panel behind it.
Key Takeaways
- Barrette-compatible kitchen work in Sunnyvale: $14,000 – $45,000 installed.
- Cabinet-only swaps: $4,000 – $13,000. Countertops: $2,000 – $6,500. Backsplash: $800 – $2,500.
- Written price before any work starts, free estimate, 365-Day Done Right Promise.
- Background-checked, uniformed technicians. Live person answers the phone 24/7.
Which Barrette Models This Applies To

Barrette built a wide range of kitchen product lines over the years, and the part you need depends on which line is actually in your Sunnyvale home. The fastest way to identify it is to open a base cabinet door and look for the manufacturer label on the inside face frame or the underside of the cabinet box. Those labels list a series code and sometimes a size spec in inches. Photograph the label and the hinge plate before you call anyone.
Common Barrette kitchen lines we run into in Sunnyvale kitchens are the Shaker-style door series, raised-panel lines, and the flat-slab drawer fronts. Each series uses different hinge plate screw patterns and drawer glide mounting styles, so a hinge off a Shaker cabinet won’t line up on a raised-panel door without a different plate. That mismatch is the single biggest compatibility gotcha we see: same brand, wrong series, screw holes just far enough off to tear out the frame.
The OEM-versus-aftermarket call matters here too. Barrette-specific hinges, drawer glides, and shelf pins can be hard to source new, and aftermarket equivalents get you the same function for less. When we quote a Barrette-compatible repair in Sunnyvale, we tell you which parts are OEM-matched and which are quality aftermarket equivalents, and we write both options down before any work starts. Penhallow Remodeling Sunnyvale is an independent service provider and is not affiliated with Barrette.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Kitchen Remodeling Is Failing
Barrette cabinets aren’t failing because they were built poorly. Something underneath or inside is failing, and the symptom tells you which part.
- Sagging door at the hinge corner. The hinge plate screws have pulled loose from a stripped pilot hole, which happens faster in California kitchens that see humidity swings near the dishwasher. A hinge swap alone won’t fix it; the pilot holes usually need to be filled and redrilled, or the hinge plate moved to fresh wood.
- Drawer that binds or sticks mid-travel. The drawer glide wheels or the roller housing is worn, or the drawer box is out of square after years of heavy pans. Pull the drawer and look for flat spots on the wheel; that’s wear, not a mystery.
- Soft or swollen cabinet floor near the sink or dishwasher. Particleboard-core Barrette boxes absorb water where the sealant has failed, and the panel swells, domes, and never springs back. This is our most common Sunnyvale discovery during a planned kitchen redo.
- Loose shelf pin holes or sagging adjustable shelves. Years of loaded shelves widen the pin holes in particleboard, and a shelf that held 40 pounds of cookware ten years ago won’t hold 20 today.
- Cracks near door stiles and face-frame joints. Barrette’s painted finishes can crack at joints as the wood and the paint move differently through our dry summers and damp winters. Cracks alone are cosmetic; cracks that line up with a sagging door point to something mechanical.
Replacement Cost & What’s Included

For Sunnyvale, the numbers we write on paper look like this:
- Full kitchen remodel, Barrette-compatible line: $14,000 – $45,000
- Small kitchen remodel: $9,000 – $20,000
- Cabinet installation (the box, doors, and hardware): $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Backsplash: $800 – $2,500
- Kitchen island: $3,000 – $10,000
What drives the number up: whether the Barrette cabinet boxes can be reused or have to be swapped (soft floors near the sink, out-of-square frames), whether the countertop is cut for old appliance openings or replaced entirely, and whether the layout is moving plumbing or electrical. We quote the parts and the labor separately so you can see where the money goes. Every job comes with the 365-Day Done Right Promise in writing: if we install something and it fails inside that year, we come back and make it right at no charge. Estimates are free.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
An owner can safely check a fair bit of this. Pop off a drawer, inspect the glide wheels, look for the label inside the cabinet, confirm the hinge plate is screwed tight, and photograph everything. Snapping a picture of the Barrette series code and the model label before you call saves us a trip and gets you a faster quote.
Where it goes wrong fast: swapping cabinet doors with a mismatched hinge pattern, replacing a drawer glide on a bowed drawer box and watching it stick again inside a month, and cutting a countertop opening to fit a replacement cabinet line without checking the range hood clearance. Sink base cabinet swaps that involve plumbing rough-in are the other common DIY misfire, and the one that most often turns a $400 part into a $4,000 repair. If the cabinet floor near the sink has softened, we’d rather see it before demo than after.
One honest note on safety here: anything involving cutting the water lines under the sink, or working near the gas connection behind a range, is a job for a trained plumber or gas fitter. We don’t hand you a torch and a YouTube link.
Call (888) 426-8719 to schedule a free estimate in Sunnyvale. If it’s a repair rather than a remodel, we still give you a written number before we pick up a tool. Our technicians have up to 22 years of experience on kitchens.
FAQs

Expect 15 to 25 years for the boxes and doors, and 8 to 12 years for the hardware (hinges, glides, shelf pins) under normal use. Sunnyvale’s dry-summer, damp-winter pattern is harder on particleboard cores than people expect, so the boxes near the sink and dishwasher often age faster than the rest of the kitchen. Call (888) 426-8719 for a free inspection if yours are in that range.
Often, yes. Sticking drawers, sagging doors, and loose hinges are usually a hardware swap plus a hinge plate relocation, not a full cabinet replacement. The exception is a soft or swollen cabinet floor near the sink: once particleboard absorbs water, it stays swollen, and the box has to go. We’ll tell you which one you have before we quote. Call (888) 426-8719.
A single hardware swap (hinges, glides, shelf pins) is typically a same-visit job of 1 to 3 hours. A cabinet box replacement on a sink base runs a half day to a full day because of the plumbing and countertop work involved. A full kitchen remodel runs 4 to 8 weeks depending on cabinet lead times from Barrette or our other cabinet lines. Call (888) 426-8719 for a written timeline.
We source Barrette-compatible components and quality aftermarket equivalents, and we tell you which is which on the quote. We don’t carry stock and we don’t order anything before you approve the written price. Alongside Barrette, we also work with KraftMaid, Cambria, and Silestone for full-kitchen replacements. Call (888) 426-8719 to talk through your options.
Schedule Your Free Sunnyvale Kitchen Estimate
Whether it’s one failing Barrette hinge or a full kitchen redo, we start the same way: a written price before any work starts, a real arrival window, background-checked uniformed technicians, and the 365-Day Done Right Promise covering the work in writing. A live person answers the phone 24/7. Call (888) 426-8719 to schedule your free estimate for your Sunnyvale kitchen.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












