







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Driveway & Pavers: The Sunnyvale Owner’s Guide
We install and repair Barrette-brand driveway pavers and hardscape systems across Sunnyvale, and a full paver driveway installation typically runs $7,000 – $18,000 for a standard two-car drive. A single failed paver section or a sunken edge course can usually be reset and re-sanded in one visit, while a full relay takes one to three days. Penhallow Remodeling Sunnyvale is an independent remodeling contractor, not affiliated with Barrette.
Most Sunnyvale owners don’t notice a paver system failing from the driveway. They notice it from the sidewalk – a lip where the apron meets the concrete, a paver that rocks when the car rolls over it, or a rut that holds water after the first real winter rain. By the time a paver lifts, the base beneath it has usually been moving for a season or two.
Which Barrette Models This Applies To

Barrette Outdoor Living makes pavers, hardscape blocks, and driveway edging under several distinct lines, and Sunnyvale has plenty of all of them. Their structural pavers and retaining systems run under different product families than their decorative hardscape, and the jigsaw-style pavers install and reset differently than traditional rectangular units. The right part and the right installation method start with knowing which line you have.
Here’s how to identify what’s on your drive. Pull one loose paver and look at the underside – Barrette stamps the product line into the bottom of most units. Measure thickness with a tape: paver thickness drives which base prep and setting bed apply, and swapping a thin unit for a thick one creates a trip hazard at every seam. If you’re only replacing a few pavers, match the color and finish code, not just the shape, since dye lots shift between production runs and a mismatched replacement will read as a patch from the street.
OEM vs. aftermarket for Barrette
For pavers themselves, we source genuine Barrette product wherever the line is current, because a compatible-but-different paver from another maker will almost never match thickness and tone closely enough to blend. For the setting materials under the drive – the bedding sand, the polymeric joint sand, the edge restraint – quality aftermarket equivalents are fine and often better suited to California’s wet-dry swings. We don’t carry stock; we order the correct part for your specific line before the crew comes out.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Driveway & Pavers Is Failing
Pavers don’t wear out. Bases fail, joints open, and edges let go. These are the symptoms Sunnyvale owners call us about, and what’s usually happening underneath:
- A paver rocks or feels hollow underfoot. The bedding sand has washed out or compacted unevenly, so the unit is sitting on a void instead of a bed. Left alone, the paver cracks and the void grows.
- Joint sand has washed out and weeds are pushing through. Sunnyvale’s dry summers followed by soaking rain pull the polymeric sand out of the joints. Once the joints open, water gets straight into the base.
- Low spots holding water after rain. This is a base or drainage failure, not a paver failure. Water sitting on the drive finds its way under the edge restraint and starts working the whole field loose.
- The edge course is spreading or the driveway apron has dropped. Where pavers meet concrete – the apron, the garage slab – settlement at the transition is the most common failure we see on Sunnyvale drives, because the two surfaces move differently with the soil.
- Efflorescence: the white chalky bloom on the surface. Salt working up from the base through moisture. It’s cosmetic on its own but a reliable sign that water is moving where it shouldn’t.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Sunnyvale driveway paver work prices out like this, and the number you get in writing is the number on the invoice:
| Scope of Work | Typical Price |
|---|---|
| Full paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement (existing removed) | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation (for reference) | $3,500 – $11,000 |
Where your number lands depends on square footage, how much base has to be rebuilt versus topped, paver line and thickness, and whether the edge restraint and drainage need rework. What’s included on every job: removal and haul-off, base prep and compaction, bedding, the pavers themselves, polymeric joint sand, edge restraint, and a written guarantee on the work. Give us a call at (888) 426-8719 and we’ll come out and put a real range in front of you before anything gets moved.
DIY or Call Us?
What you can safely do yourself: walk the drive and photograph every rocking paver and low spot, pull one loose unit to read the stamp and thickness, and check the joint sand with a screwdriver – if it’s soft or gone, that’s your answer. Small cosmetic resealing or topping off joint sand on a sound drive is fair owner work.
Where DIY goes wrong is the base. Pulling pavers to “fix” a low spot almost always means disturbing the compaction below it, and once that’s opened, the field next to it starts moving too. We’ve seen a $40 bag of sand turn into a $3,000 relay because the base wasn’t recompacted properly. If the drive has settled at the apron, is spreading at the edges, or has more than a handful of rocking units, it’s a base job, and a base job wants a plate compactor and a trained eye. Call (888) 426-8719 and we’ll tell you straight whether it’s a repair or a rebuild.
FAQs

The pavers themselves commonly last 25 to 50 years; what fails first is the base and joints, usually within 10 to 15 years if the drainage and edge restraint weren’t done right. Sunnyvale’s clay-heavy soils and winter rain cycles punish a thin base faster than the pavers wear out.
Often, yes. If the failure is localized – a few rocking pavers, a settled apron, washed-out joints – we can lift that section, rebuild the base, reset the pavers, and re-sand, typically without touching the rest of the field. A drive that’s spreading throughout or holding water across its width usually needs a rebuild.
A localized repair is usually one day. A full relay runs two to three days, and a new paver driveway installation runs three to five depending on square footage and base prep. We give you a defined arrival window and tell you what the crew will be doing each day.
We identify your Barrette line from the manufacturer stamp on the underside of a paver, confirm thickness, and order genuine product in the closest available dye lot. We don’t keep parts in stock or carry them on a truck; the correct unit is ordered for your specific drive before we schedule the work.
If you’ve got a Barrette drive in Sunnyvale that’s rocking, pooling water, or shedding joint sand, call Penhallow Remodeling Sunnyvale at (888) 426-8719 for a free estimate. We put the price in writing before work starts, back every job with a written guarantee and our 365-Day Done Right Promise, and a real person answers the phone around the clock. We also work with KraftMaid, Cambria, and Silestone on interior projects, so one call can cover the drive and the kitchen if you’re planning both. Call today to schedule your free estimate.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












