







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Atlas Kitchen Remodeling: The Sunnyvale Owner’s Guide
If you have an Atlas cabinet line or an Atlas-spec kitchen package and something has failed – a door that won’t sit flush, a drawer that grinds, a hinge that snapped – we install Atlas-compatible kitchen components and complete kitchen remodels throughout Sunnyvale. Full kitchen remodels here typically run $14,000 – $45,000 depending on layout, cabinet line and countertop material, and a single component swap or cabinet reface is a fraction of that. We’re an independent remodeling company, not affiliated with Atlas, and we give you a written price before any work starts.
Owners usually find the problem the same way. A cabinet door starts catching on the frame in one corner. A drawer pulls out crooked and won’t push back. Or the paint on a cabinet face near the range begins to lift and bubble after a few summers. In Sunnyvale’s older Eichler and ranch-style kitchens, we see this most in homes where the original boxes are sound but the hardware and door fronts have taken twenty-plus years of heat and humidity swings from the kitchen side of the house.
Which Atlas Models This Applies To

Atlas builds cabinet lines across several series, and the part that fits one series usually won’t fit another. The first thing to do is find the label. Atlas typically places a specification sticker inside the cabinet door or on the back panel of a base cabinet – it lists the series name and the door style. If the label is gone, measure the door overlay (the amount the door covers the face frame), the hinge cup bore (usually 35mm), and the drawer box height and width. Those three measurements identify the replacement parts faster than any model number.
On the OEM-versus-aftermarket question, here’s the honest split. Atlas-branded hinges and slides are the safe match if you want an exact fit and the same hole pattern. Quality aftermarket equivalents – Blum, Salice, Grass for hinges and slides – often outperform the original hardware and cost less, but they may require new screw holes or a different mounting plate. For door fronts and cabinet boxes, matching the Atlas finish and door profile is the priority, and that almost always means going through the Atlas line rather than substituting.
One compatibility gotcha we run into in Sunnyvale: Atlas changed its drawer slide mounting pattern on some series over the years, so a slide that looks identical on the shelf may not line up with the pre-drilled holes in an older box. Measure before you order. We also install KraftMaid and Wellborn cabinetry when a homeowner decides to replace rather than repair, and we set Cambria and Silestone counters to finish the job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Atlas Kitchen Remodeling Is Failing
- Doors that won’t stay closed or won’t sit flush. The hinge has lost tension or the mounting screws have stripped out of the particleboard or plywood box. A stripped screw hole is a box problem, not a hinge problem, and swapping the hinge alone won’t fix it.
- Drawers that grind, stick or pull out crooked. The slide has worn or the drawer box has racked out of square. In Sunnyvale kitchens we often find the slide is fine but the box has swelled slightly from moisture near the sink cabinet.
- Cabinet faces lifting, bubbling or peeling near the range or sink. Heat and steam have broken down the finish or the laminate edge banding. This is a door-front or reface issue, not a structural one.
- Soft or spongy cabinet bottoms and shelves. Water has reached the substrate. Left alone, the box loses strength and the shelf line sags.
- Doors that drag on the frame at one corner. The cabinet has settled or the hinge plate has shifted. Sometimes it’s a two-minute adjustment, sometimes it signals the box needs re-squaring.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Sunnyvale, here’s what the work runs:
- Cabinet installation (new boxes and hardware): $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
- Full kitchen remodel: $14,000 – $45,000; small kitchen remodel: $9,000 – $20,000
The range is driven by cabinet line, countertop material, layout changes and whether we’re moving plumbing or electrical. Every project gets a written price before any work starts – not a range, not a verbal ballpark. If a repair fails inside the 365-Day Done Right Promise, we come back and fix it at no charge, and a free second visit is included if a repair doesn’t hold. Materials come from recognized brands, so the products behind the promise are as solid as the promise itself.
DIY or Call Us?
Some things you can safely check yourself: tighten a loose hinge screw, adjust a hinge with the built-in adjustment screws, clean and lubricate a sticky drawer slide, and measure your door overlay and hinge cup bore so you order the right part. Those are low-risk and worth doing before you call anyone.
Where it goes wrong: replacing a stripped hinge mount requires filling and re-drilling the box, and a wrong repair there splits the cabinet side. Swapping a drawer slide with a mismatched mounting pattern leaves you with a drawer that won’t close. And if the cabinet box has water damage or the shelves are sagging, replacing hardware on a failing box just postpones the problem. If you’re not sure which layer is failing, call (888) 426-8719 and we’ll tell you honestly whether it’s a part swap or a bigger fix.
FAQs

Cabinet boxes in a well-kept Sunnyvale kitchen commonly last 20 to 30 years, but hinges and slides typically need replacement at 10 to 15 years with daily use. The finish near the range and sink usually shows wear first because of heat and steam.
Often yes. Hinges and slides are usually a straightforward swap, and a stripped screw hole can be filled and re-drilled. If the cabinet box itself has water damage or the shelves are soft, replacement makes more sense than repair.
A single hardware swap is usually an hour or two. A full cabinet reface or door-front replacement across a kitchen typically takes a day or two, and a full kitchen remodel runs weeks depending on scope. We give you a written timeline with the written price.
We identify your Atlas series from the label or measurements, then source the matching component through the Atlas line or a quality aftermarket equivalent when it fits better. We tell you which option we’re using and why before we order.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.
Ready for a written price on your Atlas kitchen repair or remodel? Call (888) 426-8719 for a free estimate. A live person answers 24/7, our technicians are background-checked and arrive in uniform, and every project carries the 365-Day Done Right Promise in writing.












