







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Atlas Home Additions & ADU in Sunnyvale: The Owner’s Guide
We build and complete Atlas-compatible home additions and accessory dwelling units for Sunnyvale homeowners, with installed projects typically running $45,000 – $130,000 for a home addition and $90,000 – $220,000 for a full ADU. Atlas works from a licensed dealer and fabricator network rather than a single factory catalog, so the “part” here is really the panelized shell, truss package, and connection hardware specified for your plan set. Owners usually discover a problem the same way: a wall that reads out of plumb near an Atlas panel joint, condensation or staining along a panel seam after a wet winter, or a hardware set that was substituted during the original build and never quite sat right.
Penhallow Remodeling Sunnyvale is an independent general contractor and is not affiliated with Atlas. We work from your stamped plans and the Atlas submittal documents for your model.
Key Takeaways
- Atlas panel and truss specifications are plan-specific, not universal. The right part is the one named in your submittal package.
- Most “failing” additions in Sunnyvale trace to connection hardware and flashing details, not the structural panels themselves.
- Installed home additions in Sunnyvale run $45,000 – $130,000; ADUs run $90,000 – $220,000.
- You get a written price before any work starts, backed by our 365-Day Done Right Promise.
Which Atlas Models This Applies To

Atlas produces modular and panelized building systems rather than a consumer product line with serial numbers stamped on a plate. That means compatibility is driven by the plan set and the engineering submittal for your specific project, not by a model number you can look up in a table. The practical identifier is the cover sheet of your structural drawings, which names the Atlas system, the panel thickness and span ratings, and the hardware schedule. If you don’t have the original documents, a title search at Santa Clara County Recorder’s office will often surface the permit set, since Sunnyvale requires the structural calculations to be filed with the building permit.
The OEM-versus-aftermarket decision is real on Atlas work. Atlas-specified connectors and hangers are engineered to the load path in your drawings; a generic hardware-store equivalent with the same visual profile may carry a lighter published capacity. For visible finishes and trim, a quality aftermarket equivalent is usually fine and we’ll tell you when it is. For structural connectors, anchor systems, and the panel sealant specified in the submittal, we source to the specification. We don’t stock Atlas parts and we don’t carry them on a truck; every component is ordered against your plan set and delivered to the job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Atlas Home Additions & ADU Is Failing
- Staining or efflorescence along a panel seam after rain. This usually points to a failed sealant joint or a flashing detail that was lapped the wrong direction, letting water track behind the panel face rather than shedding off it.
- A door or window in the addition that binds seasonally. Framing that moves with the seasons suggests a connection issue at the panel-to-foundation interface, or hardware that was undersized for the span.
- Visible gaps or daylight at the junction between the addition and the original house. The tie-in detail is the most common weak point in any panelized addition, and in Sunnyvale’s expansive clay soils, minor settlement shows up here first.
- Condensation on interior wall surfaces or musty odor in the new space. Inadequate or reversed vapor control at the panel assembly traps moisture, and it’s a pattern we see in additions built before the current Title 24 detailing was routine.
- Popped drywall screws or hairline cracks radiating from panel joints. Some movement is normal in the first two years as framing dries and settles; cracks that keep growing past that window are worth a look at the hardware schedule.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included in Sunnyvale

Replacing or correcting Atlas-compatible work in Sunnyvale falls into two buckets, and the price depends on which one you’re in.
| Scope | Typical Installed Range |
|---|---|
| Home addition (Atlas-compatible, full build) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion to ADU or living space | $30,000 – $80,000 |
Within the addition range, the number moves on square footage, foundation type (slab versus raised), whether the roofline ties into the existing structure, and finish level. What’s included in our written price: permit pulling and inspection coordination, demolition, framing and sheathing, the Atlas-specified connection hardware, roofing and flashing, insulation and drywall, and finish work to the scope we agree on. Every project carries a written price before work starts and our 365-Day Done Right Promise: if the work fails inside that year, we come back and fix it at no charge.
DIY or Call Us?
Some checks are safe and useful for a homeowner. You can look for staining along panel seams from the ground, note where doors bind and when, photograph cracks with a dated reference, and pull your permit documents. What you shouldn’t take on yourself is anything involving the structural connection path: anchor bolts, hold-downs, hangers, and panel fasteners are load-bearing, and getting one wrong isn’t visible until it fails. Cutting into a panel assembly to investigate also voids the moisture and fire detailing the engineer specified. If your addition is in a Sunnyvale neighborhood like Ponderosa or Lakewood, where the soil is notoriously expansive, that connection detail matters more, not less.
Call (888) 426-8719 and we’ll schedule a free estimate. A live person answers around the clock, and our technicians are background-checked and arrive in uniform.
FAQs

A properly built panelized addition should serve 50 years or more, but the sealants and flashing details need attention every 10 – 15 years in the Bay Area climate. The structural panels themselves rarely fail; the weatherproofing around them is what ages. Call (888) 426-8719 for an inspection and a written scope.
Often yes. Seam staining, flashing failures, and connection hardware can usually be corrected without tearing out the addition, and we’ll tell you plainly when a repair is the right call versus when a section needs to come out. Call (888) 426-8719 for an honest assessment.
A targeted repair typically runs a few days to two weeks, while a full addition build runs several months depending on size, permits, and inspections. We give you a defined arrival window and a written schedule before work starts. Call (888) 426-8719 for a timeline specific to your project.
We order against your plan set and engineering submittal, not off a shelf, and every component is delivered to the job before we start. We also source materials from recognized trade brands, including KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures when finish work is in scope. Call (888) 426-8719 to start with a free estimate.
Whether you’re correcting a failing panel joint or planning a full ADU from the ground up, Penhallow Remodeling Sunnyvale gives you the price in writing before anyone picks up a tool, and stands behind it. Call (888) 426-8719 for your free estimate.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












