







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Fence Installation: The Sunnyvale Owner’s Guide
Ameristar aluminum fence installation in Sunnyvale typically runs $3,500 – $9,000 installed, depending on linear footage, panel grade and gate count. We install Ameristar-compatible aluminum systems with a written price before any work starts and a written guarantee on the finished job. Owners usually land on this page after a storm or a decade of sun has done its work: a leaning post, a gate that drags on the slab, or panels that rattle loose at the brackets and no longer hold a clean line along the property.
Worth saying up front: Penhallow Remodeling Sunnyvale is an independent contractor, not affiliated with Ameristar. What we do is install Ameristar systems correctly for Sunnyvale yards and get the details right the first time.
Key Takeaways
- Ameristar aluminum fence installed in Sunnyvale: $3,500 – $9,000, priced in writing before we start.
- We’re independent, not affiliated with Ameristar. Every job carries our written guarantee and the 365-Day Done Right Promise.
- Most Sunnyvale fence failures trace back to post footings and hardware, not the aluminum itself.
- Aluminum is the right call here; wood fencing fights the local climate and loses.
Which Ameristar Models This Applies To

Ameristar builds ornamental aluminum fencing in a few rackable panel series, and the part that matters most for a Sunnyvale install is matching the panel to the post and the post to the ground. Their residential lines (the ones you’ll see at most local supply yards) are sold as pre-assembled racks, with posts sized by height and rail configuration, and gates shipped as a separate kit from the panels. The compatibility gotcha: a panel ordered to fit a 6-foot post won’t sit right on a 5-foot post, and Ameristar’s picket spacing and rail heights are not interchangeable between series. Measure the existing post center-to-center and the rail height before you order, not after.
On the OEM-vs-alternative question: for Ameristar specifically, genuine panels and hardware are easy to source and built to last decades in dry, sunny conditions. We don’t stock parts and there’s nothing carried on a truck; every material is ordered against the measured job so the panels and posts arrive matched. For the rest of the property, we also install recognized trade brands like James Hardie siding and Cambria, Silestone and Caesarstone countertops on remodel work. For fences we stay with Ameristar and install it as a proper system, end to end.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Fence Installation Is Failing
Most Sunnyvale fence problems show up at the connection points, not in the aluminum. Here’s what to watch for and what’s actually happening underneath.
- Posts leaning or rocking. The footing has loosened or the post was set in a shallow hole. In Sunnyvale’s soil, a post set without enough depth and proper concrete will start to move within a season or two.
- Gate sagging or dragging on the ground. The hinge post is shifting, or the gate needs re-hanging and its hardware re-tightened. Aluminum gates are lighter than wood but far less forgiving of a post that’s off plumb.
- Panels rattling at the brackets. Fasteners have worked loose from wind and thermal movement. Left alone, the rail-to-post connection wears and the panel can pull free.
- Rust or chalky corrosion at the joints. Usually a sign the finish was nicked during install and moisture got in. In a Sunnyvale summer, an unprotected cut edge is where corrosion starts first.
- Uneven top line along the run. Posts were set at different depths or the ground shifted. A wavy top rail is the clearest sign the original install didn’t account for the grade.
One honest note on safety: a fence is not a dangerous part to check, but digging near a post can hit irrigation lines, gas service or buried electrical. Before you put a shovel in the ground, call 811 for a free utility locate. If you’re unsure what’s under the footing, stop and call us.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a typical Sunnyvale residential yard, Ameristar aluminum fence installation lands between $3,500 and $9,000. That number is all-in: panels, posts, concrete, hardware and labor, priced in writing before we touch the yard. What pushes it toward the top of the range is linear footage, taller posts, extra gates, and any tear-out of an old fence or footing. A simple perimeter with one gate tends to sit near the bottom; a long run with multiple gates and grade changes sits higher.
We don’t hide labor in a separate line, and we don’t quote a range and then change it at the door. The number you sign is the number on the invoice. Every install carries our written guarantee and the 365-Day Done Right Promise: if something we installed fails within a year, we come back and make it right at no charge. A free return visit costs you nothing if a repair ever needs a second look.
Typical Sunnyvale pricing
- Standard aluminum fence installation: $3,500 – $9,000 installed
- Driveway or gate entry with one gate: toward the upper end of that range
- Removal of an existing fence or footings: factors in as extra scope
DIY or Call Us?
You can safely do the diagnosis: walk the run, check the top line against a string, push the posts to see what moves, and measure post-to-post spacing so the panels or gate match. Replacing a single loose fastener is fine. Where DIY goes wrong is at the footing and the load path. Setting a fence post that stays plumb on Sunnyvale’s shifting soil takes a properly dug hole, the right concrete mix, and a plumb check that a first-time installer usually gets wrong by half an inch, which is exactly the half-inch that makes a gate drag six months later. A fence is a lever arm, and one off-plumb post pulls the whole run out of line.
For a full replacement or a problematic gate, call us at (888) 426-8719 for a free estimate. A live person answers, day or night, and our technicians are background-checked and arrive in uniform. Every job gets a written price and a real arrival window, so you know exactly who’s coming and what it costs before work starts.
Frequently Asked Questions

Ameristar’s finish and aluminum construction are built to hold up for many decades in our dry, low-humidity climate. Most failures here are in the footings and hardware, not the panels. Installed correctly, the aluminum outlives the installation around it. Call (888) 426-8719 if your run is sagging and you want an honest read on whether it’s the fence or the posts.
Often yes. A single loose panel, a re-hung gate, or a re-set post can be repaired without replacing the whole system. If the top line is uniformly wrong or rust is spreading at the joints, replacement makes more sense. We’ll tell you which it is, in writing, before any work starts.
A typical residential run takes one to three days, depending on footage, gate count and how much old fence comes out. We give you a specific arrival window before the job, not a vague morning-or-afternoon.
We measure the job first, then order matched Ameristar panels, posts and gates against those measurements. We don’t stock parts and don’t carry a parts inventory, so everything arrives matched to your install. Because we’re independent and not affiliated with Ameristar, we buy the same materials any qualified installer would; the difference is in how we set and finish them.
Whether you’re replacing a failing run or starting fresh, we’ll give you a written price and a written guarantee before the first post goes in. Call (888) 426-8719 for a free estimate in Sunnyvale.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












