







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Kitchen Remodeling: The Sunnyvale Owner’s Guide
Kitchen remodeling in Sunnyvale that incorporates Tremron products typically runs $14,000 to $45,000 installed, depending on layout, cabinet line and countertop material. We install Tremron-compatible cabinetry, backsplash tile and hard-surface finishes, and we schedule estimates within a firm arrival window rather than a vague “sometime Tuesday” promise. Most Sunnyvale homeowners don’t start by researching remodelers at all. They start by noticing something in the kitchen that has quietly failed: a cabinet door that swings past its stop, a drawer that no longer catches, a backsplash tile that has lifted away from the wall along the countertop seam. Those small failures are usually the first sign the original install has a problem worth pricing before it spreads.
Which Tremron Models This Applies To

Tremron is best known in the Bay Area for hardscape and surface products, so “Tremron kitchen remodeling” gets used loosely. It can mean the undercabinet substrate, the finished backsplash tile, or the surface layer over a countertop edge, and each takes a different replacement part. Before ordering anything, check the model or series code on the original spec sheet or the label on the back of the cabinet door. Tremron tile series run to specific nominal face sizes, usually within a quarter inch of the stated dimension, and a replacement piece pulled from the wrong series won’t sit flush with the surrounding run. Measured dimensions from the actual failed piece always beat a visual match.
OEM replacement matters more here than for a brand with consistent stock. Tremron has changed dye lots and edge profiles across production runs, so an aftermarket tile with the same nominal size can sit a shade off and stand proud of the field. For cabinet hardware and substrate, a quality aftermarket part is fine. For visible surface pieces, staying with the same series code is usually the only way to avoid a visible patch. We’re an independent service provider and not affiliated with Tremron; we work with the specified part or match it as closely as the available series allows.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Kitchen Remodeling Is Failing
- Cabinet doors that drift past their stop. The hinge spring or damper has lost tension, and the door swings open on its own every time. This is a hinge failure, not a wood failure, and the fix is a single matched hinge, not a new door.
- Drawers that stick or won’t seat fully. The slide rail has worn or the cabinet box has racked slightly out of square. In Sunnyvale’s older ranches, seasonal wood movement around south-facing walls is a common cause worth checking before assuming the rail itself failed.
- Backsplash tile lifting along the countertop seam. Water wicking behind a failed caulk line has broken the bond between tile and substrate. Left alone, it spreads along the run and can take out several tiles at once.
- Grout cracking in a repeating pattern. A moving substrate under the tile, not poor grout, is usually the culprit. Repointing without fixing the movement just cracks again in a few weeks.
- Countertop edge separating from the cabinet run. The support or the adhesive has given way under load. This one can progress into a cracked countertop if it’s ignored long enough.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here are real installed ranges for Sunnyvale, parts and labor together:
| Work | Installed Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
The low end assumes a like-for-like swap with a standard Tremron series, stock sizes, and the existing layout. The high end covers custom cabinet lines, a change to the footprint, or a countertop upgrade. You get a written, line-item price before any work starts, so you see the part cost and the labor cost separately. Say yes to the quote and the number on day one is the number on the invoice. Every project carries our 365-Day Done Right Promise in writing.
DIY or Call Us?
You can safely check cabinet hinge tension, confirm a slide rail part number, and photograph a lifted tile to record the series code. That’s useful and free. Where it turns costly is the install side: pulling a tile that’s bonded to a marginal substrate can open the wall behind it, and re-seating a countertop edge without fixing the underlying support just moves the failure a few inches. Given Bay Area costs, a botched backsplash fix that has to be redone runs higher than doing it once. If you’re unsure what failed, call (888) 426-8719. A live person answers, estimates are free, and a failed repair gets a free return visit with no service charge.
FAQs

A properly installed Tremron series should hold up 15 to 20 years before hardware or grout starts to fail, and the parts usually go before the material does. Sunnyvale’s mild, dry summers help tile last longer than in wetter climates, but humidity swings against exterior walls still work on caulk joints and grout lines over time. Call (888) 426-8719 for an exact quote; estimates are free.
Often yes. A single hinge, slide rail, or one tile can be swapped without touching the rest of the run, as long as the original series is still available. Full replacement only makes sense when the substrate or cabinet box has failed underneath. Call (888) 426-8719 and we’ll tell you which case you’re in.
A single hinge or slide swap is usually done in one visit, while a backsplash run or countertop edge repair typically takes one to two days once the part is on hand and the substrate is sound. We’ll give you a written arrival window before the work; call (888) 426-8719 to schedule.
We match by series code and measured dimension from your original piece, then order the specified part rather than guessing off a photo. Where the exact series is discontinued, we match the closest available and confirm the fit with you before installation. Call (888) 426-8719 for a free estimate.
Whatever the part, the goal is the same: get you the right piece, price it in writing, and show up when we said we would. We also work with KraftMaid, Cambria, and Silestone finishes alongside Tremron-compatible surfaces, so the whole kitchen can be brought into line in one project. Call (888) 426-8719 today for your free estimate. Our team answers live, 24/7, and every price comes to you in writing before a single tool comes out of the case. You’ll get a clear range, a written guarantee, and a professional who arrives in uniform and on time. Let’s get your Sunnyvale kitchen working properly again.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












