







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Driveway & Pavers: The Sunnyvale Owner’s Guide
Therma-Tru doesn’t make driveway pavers – it makes entry doors and door components – so if a Therma-Tru door part is failing at the threshold where your entry meets the driveway or paver walkway, that’s the junction we fix. Installed pricing for the door and threshold work that sits on that junction typically runs $250-$1,800 depending on the component, and pavers themselves run $7,000-$18,000 for a full driveway. We schedule free estimates, not same-day dispatch, because matching the right part to the right Therma-Tru model takes a measurement visit first.
Sunnyvale owners usually find this problem the same way: a door that won’t close flush after the pavers settle, daylight showing under the threshold, or a sill that’s started to rot where winter rain pools against the concrete. The fix is rarely the door itself – it’s the threshold, sill, or sweep that bridges the gap between the house and the hardscape.
Which Therma-Tru Models This Applies To

Therma-Tru’s entry lines – Fiber-Classic, Smooth-Star, and the higher-end American Style series – each use slightly different threshold profiles, and the part that fits a Fiber-Classic 36-inch door won’t necessarily seat in a Smooth-Star of the same nominal width. The threshold’s overall height, the sill cap length, and the adjustable riser depth all vary by series and vintage, which is why “36-inch Therma-Tru threshold” isn’t enough to order the right part.
The most reliable identifier is the label on the door’s hinge jamb, which lists the model, series, and a manufacturing code. If that label has been painted over or removed, we take three measurements: the rough opening width and height, the threshold’s total protrusion above the subfloor, and the sill cap’s end-to-end length. Those three numbers usually narrow it to one or two compatible profiles.
On OEM versus aftermarket: Therma-Tru’s own replacement thresholds and sill caps are the safest fit for a door still under its factory warranty, and their adjustable aluminum thresholds are built to the same specs as the originals. Quality aftermarket sweeps and door bottoms from makers like Pemko and Reese can work well and often cost less, but the fit tolerance is tighter – a sweep that’s 1/16-inch off will drag or whistle. For a Sunnyvale door facing full western sun, we lean toward the OEM threshold cap because the finish holds up better to UV.
Penhallow Remodeling Sunnyvale is an independent service provider. We are not affiliated with Therma-Tru, and we don’t carry their parts on a truck.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Driveway & Pavers Is Failing
These are the symptoms we see most often at the door-and-driveway junction in Sunnyvale homes:
- Daylight visible under the closed door. The threshold cap has compressed or the adjustable riser has dropped, usually because the door has been walked over thousands of times or the subfloor has shifted. This is the first sign most owners notice.
- The door drags or won’t latch. Pavers settling or lifting near the threshold can push the sill up slightly, throwing the door out of square. A 1/8-inch rise at the sill is enough to make a deadbolt miss its strike.
- Water pooling against the threshold after rain. Sunnyvale’s clay-heavy soil shifts with our wet winters, and pavers set without proper slope can push water toward the door instead of away. The threshold then takes on water it wasn’t designed to shed.
- Soft or discolored wood at the sill corners. This is rot starting where the threshold meets the frame. It moves fast once it starts – usually within one wet season – and a rotting sill is no longer holding the door square.
- A whistling sweep or a visible gap at the bottom corners. The door sweep has hardened or shrunk, or the threshold’s end caps have cracked from sun exposure. Both are common on west-facing doors in Sunnyvale after several summers.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work typically runs in Sunnyvale, with parts and labor broken out:
| Work | Installed Range |
|---|---|
| Door sweep or door bottom replacement | $150 – $350 |
| Threshold cap or sill cap replacement | $250 – $600 |
| Full adjustable threshold replacement | $400 – $900 |
| Threshold plus sill repair (rot treatment) | $700 – $1,800 |
| Paver walkway or landing repair at the door | $1,200 – $4,500 |
| Full paver driveway installation | $7,000 – $18,000 |
The range on the door side is driven by which Therma-Tru series you have, whether the sill has rotted, and whether the door needs re-hanging. On the paver side, the number depends on square footage, base prep, and whether we’re correcting slope. Every job gets a written price before we touch anything, so the number on day one matches the invoice. Our 365-Day Done Right Promise covers the installation for a full year – if the sweep drags or the threshold leaks inside that window, we come back and fix it at no charge.
DIY or Call Us?
You can safely check a few things yourself: run a flashlight along the closed door’s bottom edge to spot daylight, measure the gap at the latch side, and look for soft spots at the sill corners with a screwdriver. Those checks cost nothing and tell you a lot.
Where DIY goes wrong is the threshold itself. Replacing an adjustable threshold means pulling the door, shimming the frame back to square, and getting the sill cap sealed and sloped correctly – a job where a 1/8-inch mistake shows up as a leak two winters later. On paver work, base prep and slope are the whole game, and a re-laid walkway that drains toward the house will undo a new threshold in one season. This isn’t a safety hazard like a garage spring, but it’s a job where the margin for error is small.
Call (888) 426-8719 for a free estimate. We’ll measure, identify your Therma-Tru model, and put a written number in front of you before any work starts.
FAQs

A Therma-Tru door sweep typically lasts 8 – 12 years, and an adjustable aluminum threshold often goes 15 – 20 years before its riser stops adjusting cleanly. In Sunnyvale, west-facing doors age faster because the afternoon sun hardens the sweep and fades the threshold finish. Call (888) 426-8719 for an exact quote – estimates are free.
Often yes. A sweep that’s simply compressed can sometimes be re-seated, and an adjustable threshold with a stuck riser can often be freed and re-shimmed rather than swapped. Once the sill has rotted, though, replacement is the honest answer. Call (888) 426-8719 and we’ll tell you which situation you’re in.
A sweep or threshold cap replacement is typically a two-to-three-hour job, while a full threshold replacement with sill repair usually runs half a day to a full day. Paver repair at the door adds a day or two depending on base work. Call (888) 426-8719 to schedule your free estimate and get a firm timeline.
We identify your door’s series and vintage from the jamb label or from measurements, then order the matching threshold or sweep from Therma-Tru or a compatible aftermarket maker. We don’t stock parts on a truck, so we order to your specific door. Call (888) 426-8719 to start with a measurement visit.
We also work with KraftMaid, Cambria, and Silestone on the remodeling side of your home.
If your Therma-Tru door is leaking, dragging, or letting in daylight where it meets the driveway, the fix is usually smaller than you fear. Call Penhallow Remodeling Sunnyvale at (888) 426-8719 for a free estimate – we answer live 24/7, we arrive in a defined window, and every job comes with a written price and our 365-Day Done Right Promise behind it.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












