







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Bathroom Remodeling: The Sunnyvale Owner’s Guide
Therma-Tru bathroom remodeling in Sunnyvale typically runs $9,000 – $28,000 installed, depending on whether you’re refreshing a hall bath or rebuilding a primary suite. We install Therma-Tru exterior and interior doors as part of full bathroom remodels, priced in writing before demolition starts. Most Sunnyvale owners don’t go looking for a door problem; they find one mid-project, when the old hollow-core door won’t close square in a reframed opening, or the bathroom’s exterior door has swollen and stopped latching through another wet winter.
That’s the moment this page is for. You’ve got a Therma-Tru product in the plan, the opening doesn’t match, or the existing door has finally failed after years of steam and Bay Area humidity swings. Here’s what actually fits, what fails first, and what it costs to do it right.
Which Therma-Tru Models This Applies To

Therma-Tru makes two product families that matter in a bathroom remodel. The entry and interior door lines (Smooth-Star, Profiles, and their fiberglass and steel slab equivalents) are what most Sunnyvale bathrooms use. The exterior door lines (Fiber-Classic, Legacy, and the newer Varitru and American Pulse collections) show up on primary baths with a door to a deck or side yard.
Matching a part means matching the series and the exact slab size, not just the width. Therma-Tru slabs run in standard increments (2/6, 2/8, 2/4 heights; 24″, 28″, 30″, 32″, 36″ widths), but the hinge prep, bore spacing, and stile width change by series. A 32″ Smooth-Star slab will not drop into a Legacy frame without reworking the hinges and strike. The label inside the hinge jamb is the fastest way to identify what you have; failing that, measure the slab itself, not the rough opening.
On the OEM-vs-aftermarket question: for weatherstrip, sweep, sill, and hinge hardware, a quality aftermarket equivalent is fine and often cheaper. For the slab itself in a Sunnyvale bathroom, stick with Therma-Tru or an exact-spec match. The fiberglass skin and the moisture-resistant core are the whole point of the product, and a knockoff slab undoes that. We’re an independent service provider, not affiliated with Therma-Tru, so we source what actually fits your opening rather than what’s on a shelf.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Bathroom Remodeling Is Failing
- The door drags or won’t latch through the wet season. Fiberglass slabs and wood frames expand and contract differently, and in a Sunnyvale bathroom with a shower running daily, the frame takes on moisture the slab doesn’t. That’s binding, not a hinge problem.
- Peeling or bubbling at the bottom edge. The bottom rail is where water sits. Once the skin separates from the core there, the door is done; it won’t reseal with paint or caulk.
- Visible light or daylight around the closed door. Weatherstrip and sweep flatten with age. A 1/8″ gap is normal wear; a 1/4″ gap means the sill or sweep has failed and needs replacement, not adjustment.
- Sticking hinges or a sagging slab. A hinge that’s pulled loose from the jamb (common in older Sunnyvale homes with original frames) lets the slab drop, and the door starts hitting the strike plate.
- Steam damage on an interior door. A hollow-core interior door in a bathroom without a working exhaust fan will delaminate within a few years. If you see the skin lifting at the corners, the door has absorbed too much moisture to save.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A full bathroom remodel in Sunnyvale with a Therma-Tru door runs $9,000 – $28,000. A smaller bath refresh sits at $5,000 – $12,000. If you’re only replacing the door within a larger project, the door-and-frame line is typically a few hundred to roughly $1,500 of that total, depending on whether the rough opening needs reframing to fit a standard Therma-Tru slab.
What drives the number up: reframing a non-standard opening, adding an exterior door with proper flashing and sill pan, and upgrading to a fiberglass exterior door instead of an interior slab. What’s included: the door, hardware, finish, and labor to hang and adjust it so it closes true. Every job comes with a written price before work starts, so the number on day one is the number on the invoice.
Parts are quoted as a line item, labor as a line item, and the 365-Day Done Right Promise covers the installation in writing. If the door doesn’t close right inside that year, we come back and fix it at no charge.
DIY or Call Us?
You can safely check a few things yourself: measure the slab, find the hinge-jamb label, test whether the door latches with the weatherstrip removed, and check that the bathroom exhaust fan actually pulls air (hold a tissue to the grille). None of that requires lifting a door.
Where it goes wrong is the install. Hanging a slab in an out-of-square opening, setting a sill pan on an exterior door, and getting the reveal even are where most DIY door jobs end up back on a pro’s calendar. If the rough opening is wrong or the frame is rotted underneath, you need someone who can reframe it, not just rehang it. That’s the call to make.
Call (888) 426-8719 for a free estimate. We source the part, quote it in writing, and schedule a real arrival window.
FAQs

A properly installed Therma-Tru fiberglass exterior door typically lasts 20+ years; an interior slab in a well-ventilated bathroom runs 15 – 20. In Sunnyvale’s wet winters and dry summers, the bottom rail and weatherstrip are the first wear points, usually around year 8 – 12, which is when most owners start pricing a replacement rather than a repair.
Sometimes. Hardware, weatherstrip, sweep, sill, and hinges are all replaceable and often cheaper than a new door. If the skin is separating from the core or the frame is rotted, it’s a replacement, not a repair. We’ll tell you which one you’re looking at before quoting.
A straight slab replacement in an existing, square opening is typically a half-day. If the rough opening needs reframing or an exterior door needs its sill pan set and flashed, plan on a full day.
We measure the actual opening and match the Therma-Tru series and slab spec to it, then quote the part as a written line item before ordering. We don’t carry parts on a truck; each door is sourced to fit your opening. For the rest of the bathroom, we also install KraftMaid and Wellborn cabinetry and Cambria, Silestone, and Caesarstone countertops.
Call (888) 426-8719 for a free estimate. We quote the door and the bathroom work in writing, arrive in the window we give you, and stand behind the install with the 365-Day Done Right Promise.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












