







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Home Additions & ADU: The Sunnyvale Owner’s Guide
We build Mr-Glass-compatible home additions and ADUs for Sunnyvale homeowners, and a project of this size typically runs $45,000 – $130,000 for a home addition and $90,000 – $220,000 for a detached ADU, priced in writing before we lift a tool. An addition or ADU isn’t a part that fails all at once. Owners usually discover the problem slowly: a sliding door that stops tracking square, a window assembly that fogs between the panes, a sunroom panel that’s let water past its seal through two rainy seasons. By the time you’re searching for answers, you’ve got a gap, a draft, or a stain on the ceiling and nobody who’ll return a call about it.
We’re an independent remodeling contractor, not affiliated with Mr-Glass. What we know is how these assemblies are built, what fails first in Bay Area weather, and what a real fix costs.
Key Takeaways
- Home additions in Sunnyvale run $45,000 – $130,000; detached ADUs run $90,000 – $220,000.
- Fogged glass, out-of-square doors, and failed perimeter seals are the three failure patterns we see most.
- You get a written price before work starts and a 365-Day Done Right Promise on the finished project.
Which Mr-Glass Models This Applies To

Mr-Glass builds prefabricated sunrooms, patio enclosures, and modular addition components, and the compatibility question comes down to generation, not just brand. Earlier series used a different track extrusion and a wider thermal break than the later lines, so a replacement door roller or panel gasket ordered for the wrong generation won’t seat flush no matter how carefully it’s installed. Before we quote anything, we measure the existing rough opening, check the manufacturer label on the frame stile (usually a foil sticker inside the jamb or on the head rail), and photograph the track profile. That’s the identification that separates a right part from a return.
On the OEM-versus-aftermarket call: for structural frame components and sealed glass units we go OEM or an equivalent certified to the original spec, because the assembly’s weather rating depends on matched tolerances. For hardware like rollers, handles, and weatherstripping, a quality aftermarket equivalent is often the better value and just as durable. We install KraftMaid, Cambria, and Silestone in the finished interiors of these projects, and we apply the same standard to the enclosure parts we source: matched to the model, backed in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Home Additions & ADU Is Failing
These are the symptoms Sunnyvale owners describe when they call, and what’s usually behind each one.
- Glass fogged or hazy between the panes. The sealed unit’s perimeter seal has failed and moisture has entered the gas space. It won’t clear on its own; the insulating unit needs replacement.
- Sliding door dragging or jumping the track. Rollers wear flat or the track has collected grit and gone out of alignment. Left alone, the door racks the frame and the seal gap widens.
- Water staining or a draft at the sill. The perimeter seal or flashing has failed, and rain is getting behind the assembly. In Sunnyvale’s wet winters this shows up fast.
- Panel or frame out of square. Settling or a failed anchor lets the module shift. Doors stop latching and glass takes stress it wasn’t designed for.
- Condensation on the interior face every morning. Often a thermal break or weatherstripping failure letting cold air meet warm interior surfaces. Sometimes it’s ventilation, which we check before quoting a part.
Replacement Cost & What’s Included

Here’s what the work actually costs in Sunnyvale, with parts and labor broken out honestly.
| Scope | Installed range |
|---|---|
| Home addition (full project) | $45,000 – $130,000 |
| Detached ADU construction | $90,000 – $220,000 |
| Garage conversion to living space | $30,000 – $80,000 |
| Failed sealed glass unit or panel replacement | Quoted line-item after inspection |
| Hardware, rollers, weatherstripping refresh | Quoted line-item after inspection |
The range moves with square footage, foundation work, and finish level. We give you a written, itemized price before any work starts, so the number on day one is the number on the invoice. Every project carries a written guarantee and our 365-Day Done Right Promise: if it’s not done right, we come back and make it right at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some checks are safe for any homeowner. You can look for fog between the panes, wipe and inspect the track for grit, and confirm the door still latches square. What we don’t recommend is pulling a sealed glass unit or re-anchoring a structural module yourself. Those assemblies carry the weather rating and, on a two-story addition, real fall and glass-break risk. One honest caution: misaligned or stressed glass can shatter without warning, and once you’ve removed a panel the opening is exposed to rain until it’s resealed correctly.
Our technicians have up to 22 years of experience, arrive background-checked and in uniform, and give you a written price before touching the assembly. Call (888) 426-8719 and a real person will answer, day or night.
FAQs

A well-built addition or ADU should hold up for decades, but the enclosure components are the wear point. Sealed glass units and perimeter seals typically need attention first, often in the 10 – 20 year range depending on sun exposure and how well the sills drain. Coastal moisture and Sunnyvale’s wet winters speed that up on west-facing walls.
Often, yes. Hardware, rollers, weatherstripping, and flashing can frequently be repaired or replaced without touching the glass or frame. Fogged sealed units and out-of-square frames usually call for replacement. We inspect first and quote the smaller fix when it’s the right one. Call (888) 426-8719 for a free estimate.
A single panel or sealed unit swap is typically a day of work once the part is on site; larger module or framing work runs longer. We give you a real arrival window and a written schedule before we start, not a vague promise. Call (888) 426-8719 to book your estimate.
We identify your model generation from the frame label and track profile, then source OEM or a quality equivalent matched to the original spec. We don’t claim to stock parts or carry them on a truck; we order the right one for your assembly, confirm lead time in writing, and install it to spec. Call (888) 426-8719 for an exact quote.
Get a Written Price on Your Sunnyvale Addition or ADU
Whether you’re chasing a fogged panel or planning a full ADU in Sunnyvale, we’ll give you a written price up front, a real arrival window, and a guarantee in writing. Call (888) 426-8719 for a free estimate. A live person answers any hour, and you’ll know exactly what the job costs before anyone picks up a tool.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












