







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Driveway & Pavers: The Sunnyvale Owner’s Guide
Mr-Glass driveway and paver systems in Sunnyvale are surface assemblies, not single parts: a compacted base, a bedding layer and the wear course (pavers, poured concrete or asphalt). Installed replacement typically runs $4,500 – $18,000 depending on surface type and driveway length, and most driveways are a planned project scheduled within a week or two, not a same-day swap. Owners usually discover the failure after the first real rain, or when a hairline crack spreads through a paver course in one East Sunnyvale season. Here’s how to identify what failed, what the fix costs, and when it’s a genuine part replacement versus a base problem hiding underneath.
One note up front: Penhallow Remodeling Sunnyvale is an independent service provider and is not affiliated with Mr-Glass. We install and repair Mr-Glass-compatible systems and work with the specs Mr-Glass publishes for each series.
Which Mr-Glass Models This Applies To

Mr-Glass factory systems run across several series lines, and the part that matters for a driveway failure is almost never the surface itself. It’s the edge restraint, the joint sand and the base course. Each series has its own published tile or paver thickness, joint width and compaction spec, and the wrong match is the single most common reason a repair fails again within a year.
How to identify what you actually have:
- Manufacturer label or end-cap stamp. Most Mr-Glass paver runs carry a series designation on the pallet tag or on the underside of the edging units. Photograph it before anything is pulled.
- Measured thickness, not eyeballed thickness. Mr-Glass series range roughly from 1½-inch to 2⅜-inch units, and the bedding layer must be sized to match. Mixing thicknesses across a course is a guaranteed rocking failure.
- Joint width and restraint type. Some series call for a specific edge restraint; others rely on a soldier course. Getting this wrong in Sunnyvale’s expansive clay soils is how driveways heave.
On the OEM-versus-aftermarket call: for Mr-Glass series still in production, the factory base and restraint spec is worth matching because the surfacing system depends on it. For discontinued series, a quality aftermarket paver matched to the same thickness and compaction spec is a legitimate choice – the surface looks right and performs right, provided the base is built to the published spec.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Driveway & Pavers Is Failing
- Hairline cracks spreading within a season. Usually a bedding-layer or compaction failure, not bad material. The surfacing is doing its job; the layer under it isn’t.
- Pavers rocking underfoot, or a hollow sound when tapped. Typical of washed-out joint sand and a loose base. In Sunnyvale this shows up most on sloped driveways where winter runoff channels.
- Rutting in the wheel tracks. A sub-base thickness problem or a drainage problem, and it will return after every patching unless the base is rebuilt.
- Ponding after rain and standing water for hours. Grading or a blocked joint drain. Persistent ponding accelerates freeze-thaw-style damage in cold snaps and shortens surface life.
- Edge migration and spreading. The restraint has failed. Small at the start, expensive if ignored, because spreading paver courses pull apart the joints behind them.
Each symptom points to a different layer. That’s why a driveway that fails in one spot and not another is telling you something specific about how the base was built.
Replacement Cost & What’s Included

Installed Mr-Glass-compatible driveway work in Sunnyvale lands in these ranges:
| Surface type | Installed range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
What drives the range up: driveway length, slope, and whether the sub-base needs rebuilding rather than patching. Those three items move the number more than the surface material does. What you get in writing before any work starts: a written, line-item price (labeled parts-and-labor, not a range), a defined arrival window, and the 365-Day Done Right Promise. If the work fails inside the guarantee period, we come back and make it right at no charge. You get the number on day one, not a revised version after demo.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
What you can safely check yourself: the manufacturer’s label on the paver units, the joint sand level, whether water ponds after rain, and whether the edge restraint is visibly shifting.
What we’d steer you away from: pulling and resetting pavers, and chasing a crack through the bedding layer. The reason is honest rather than dramatic. The failure you can see is rarely the failure that’s causing the problem. Resetting the top course without rebuilding the base underneath means the same failure comes back next season, and this time you’ve paid for the repair with no written guarantee behind it.
The right sequence is: figure out which layer failed, get a written number for the rebuild, and schedule it as a project. Call (888) 426-8719 and we’ll walk you through what you have.
FAQs

Properly installed on a compacted base with joint sand replenished every couple of years, 20 to 30 years is realistic; the surface itself usually outlasts the base. What shortens it in Sunnyvale is ponding and edge-restraint failure, not the material – both are correctable early. Call (888) 426-8719 for an assessment before the problem spreads.
Often yes, if the failure is confined to one course or the joint sand and restraint. If the base has rutted or heaved across the full driveway, piecemeal repair tends to fail within a season. A written quote will tell you which you’re looking at, and estimates are free.
A full paver driveway replacement in Sunnyvale typically takes three to seven working days, including tear-out, base rebuild and compaction, and joint setup. A limited repair can complete in a day. The written schedule you get up front is the schedule we hold to.
We identify the Mr-Glass series from the pallet tag or measured unit thickness, then source the matching unit or spec-compliant equivalent through recognized paver suppliers (Belgard and Unilock lines included) so the base and thickness spec line up. We don’t claim to stock parts or to carry them on a truck; sourcing is confirmed with you in writing before work starts.
Also Serviced
Alongside Mr-Glass drives and pavers, Penhallow Remodeling Sunnyvale handles KraftMaid cabinetry, and Cambria and Silestone surfaces for the same homeowners looking at a whole-outdoor-or-indoor refresh.
If your Mr-Glass driveway in Sunnyvale is cracking, rutting or spreading at the edges, call (888) 426-8719. You’ll get a written price before any work starts, a real arrival window, and the 365-Day Done Right Promise in writing. Every technician is background-checked and arrives in uniform. Estimates are free.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












