







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Windows & Doors: The Sunnyvale Owner’s Guide
If a Mr-Glass window or door in your home has failed – a sash that won’t seal, a door that drags on the sill, glass that’s fogged between the panes – we install Mr-Glass-compatible replacements across Sunnyvale. Window replacement typically runs $4,500 – $15,000 for a full home, and impact-rated units run $8,000 – $25,000. Penhallow Remodeling Sunnyvale is an independent service provider and is not affiliated with Mr-Glass.
Most Sunnyvale owners find out something’s wrong slowly. The bedroom slider starts sticking in July when the aluminum frame expands. A west-facing window in the afternoon sun develops a haze between the glass panes that you can’t wipe off. Or the front door begins to whistle on a windy night near the Santa Cruz Mountains foothills, and you realize the weatherstripping has compressed flat. These are the three calls we get most, and each one tells us something specific about what’s inside that frame.
Which Mr-Glass Models This Applies To

Mr-Glass built vinyl-framed windows and doors in several series, and the part you need depends entirely on which series you have. The most reliable way to identify it is to pull the model label – usually a sticker on the top or side of the sash jamb, sometimes inside the head track on a slider. If the label’s gone, we measure the rough opening and the visible glass area, then match those against known series profiles.
The gotcha most Sunnyvale owners run into: the outer frame and the operating sash on the same Mr-Glass series were revised at least once, so a replacement sash from a slightly different production run may fit the frame but sit proud of the sill by a quarter inch or fail to engage the lock keeper. Measuring the glass unit’s edge profile – single-glazed versus dual-glazed, the thickness of the vinyl extrusion – catches this before you order.
For aftermarket glass, we specify dual-pane insulated units with a warm-edge spacer, which is the standard for California’s Title 24 energy rules on replacement windows. We don’t stock parts or carry them on a truck; each unit is ordered to your opening after we’ve measured it. Where a full frame is sound, an OEM-equivalent sash replacement is the honest call over a whole-unit swap.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Windows & Doors Is Failing
- Fogging or condensation between the panes. That’s a failed seal on the insulated glass unit, not a cleaning problem – moisture got into the spacer and the desiccant is saturated. Once it fogs, the glass has to be replaced, not resealed.
- The sash drags or won’t slide smoothly. On a Mr-Glass slider, this usually means the rollers have flat-spotted or the track has filled with grit. If the vinyl track itself has cracked, the fix is a track section, not just rollers.
- The door whistles or the window leaks on windy nights. Weatherstripping and sweeps compress and lose their spring over years of heat cycling. Sunnyvale’s warm summers and mild wet winters are exactly the pattern that hardens vinyl seals faster than a lot of owners expect.
- Water staining on the interior sill or wall below. This points to a failed perimeter seal or a blocked weep channel, not just the glass. Left alone, it can rot the framing behind the drywall.
- The lock won’t catch or the sash won’t latch tight. The lock keeper or the cam has worn, or the sash has shifted out of square. A loose sash flexes the frame over time and accelerates the next failure.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed window replacement in Sunnyvale runs $4,500 – $15,000 depending on the number of units, the size of the openings, and whether you’re replacing glass only or a full unit. Impact-rated window installation runs $8,000 – $25,000 for owners who want the extra protection and are factoring in the energy and insurance side.
What moves the number up: a full unit swap instead of a sash or glass swap, odd-size openings that need custom fabrication, and any rot or moisture damage found behind the frame once it comes out. What we do that matters more than the price: every homeowner gets a written price before work starts, so the number on day one is the number on the invoice, and every job carries the 365-Day Done Right Promise – if it’s not done right, we come back and make it right at no charge.
DIY or Call Us?
A homeowner can safely: pull the model label and photograph it, measure the visible glass and the rough opening, check the track for grit with a vacuum, and tighten a loose lock keeper. Those are the easy wins.
Where DIY goes wrong: removing and resetting an insulated glass unit on an upper floor is a two-person job with a real fall risk if the sash gets away from you. Forcing a swollen slider into its track can crack the frame, and resealing a perimeter with the wrong sealant traps moisture inside the wall cavity instead of letting it drain. The safe version of “checking further” is having us measure it. Call (888) 426-8719 and we’ll set a time to look – the estimate is free.
FAQs

How long do Mr-Glass windows last in Sunnyvale? A well-installed vinyl window typically gives 20 to 25 years before the glass seal or the frame weatherstripping shows its age, and Sunnyvale’s long dry summers tend to wear the seals faster on west-facing glass. If yours are fogging or the seals have gone flat, it’s time.
Can it be repaired instead of replaced? Yes, in many cases – if the frame is sound, a sash or glass swap is often the right call and costs less than a full unit. If the frame itself is cracked, warped or rotted at the perimeter, a full replacement is the honest answer. We’ll tell you which yours is and why – call (888) 426-8719 for a written assessment.
How long does the swap take? A single sash or glass unit is usually a few hours; a full unit replacement is typically a day per window depending on size and sill condition. We give you an arrival window and stick to it – The Kingswell Way means say the price before the work, show up in the window, and leave the place cleaner than we found it.
How do you source the part? After we measure your opening and identify the series from the model label, we order the unit to spec – OEM-equivalent glass with a warm-edge spacer, sized to your frame. We don’t stock parts on a truck; the part that shows up is measured to your window, not a shelf guess. Call (888) 426-8719 to schedule the measurement – it’s free.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.
If you need a Mr-Glass-compatible window or door measured, priced in writing, and installed by background-checked technicians, call Penhallow Remodeling Sunnyvale at (888) 426-8719 for a free estimate. We also work with KraftMaid, Cambria and Silestone on the interior side of the same jobs.












