







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Bathroom Remodeling: The Sunnyvale Owner’s Guide
A full Mr-Glass bathroom remodel in Sunnyvale typically runs $9,000 – $28,000 installed, with small bathroom projects landing between $5,000 and $12,000. We source Mr-Glass-compatible components and handle the installation, permitting, and finish work as an independent remodeling contractor. Most Sunnyvale owners find us after a failed shower pan, a leaking valve behind a wall, or tile that has started to hollow out around a shower bench. The failure usually shows up as a soft spot underfoot, a stain creeping across the ceiling below, or grout that keeps cracking no matter how many times it’s patched. We schedule a free estimate and a written price before any demo begins.
Which Mr-Glass Models This Applies To

Mr-Glass bathroom lines span several series with different rough-in dimensions and trim profiles, and matching the right components to your unit matters before anyone orders material. The model plate is usually inside the vanity cabinet door or on the frame behind the toilet, and it lists the series and the rough-in measurement (the distance from the finished wall to the drain center). Bring that plate number to your estimate – it’s the single most useful piece of information you can hand us, because it tells us exactly which valve trim, drain assembly, and shower surround pieces will seat correctly.
On the OEM-versus-aftermarket question, Mr-Glass replacement components are available from the manufacturer, but quality aftermarket equivalents exist for common wear parts and often cost 30% – 50% less without a meaningful drop in lifespan. For visible trim and finish pieces, we lean OEM so the look stays consistent. For internal valve cartridges and drain assemblies, a recognized aftermarket brand is a reasonable call when the OEM part is on backorder – and we’ll tell you which is which in writing, not leave you guessing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Bathroom Remodeling Is Failing
Bathroom failures rarely announce themselves. Here’s what Sunnyvale owners actually report, and what’s usually underneath it.
- Soft or spongy floor near the shower or tub. Water has been getting past the surround or pan seal for a while, and the subfloor has absorbed it. By the time the floor feels soft, the damage has typically been building for months.
- Staining on the ceiling below the bathroom. A failed shower pan, a leaking drain assembly, or a supply line behind the wall is sending water where it shouldn’t go. This one escalates fast and is worth a call before the drywall stains spread.
- Grout cracking that keeps coming back. Recurring cracks usually mean movement in the substrate – the moisture-resistant layer behind the tile – or that the original install skipped proper cement board. Patching grout won’t fix a substrate problem.
- Mildew returning within weeks of cleaning. Persistent mildew in the same corner points to moisture trapped behind the tile or a ventilation problem, not a cleaning problem. It’s a sign the wall assembly is staying wet.
- A valve that drips or a drain that won’t seal. Worn cartridges and failed drain gaskets are the most common Mr-Glass component failures we see, and they’re also the easiest to catch early if you know what to look for.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Sunnyvale homeowners actually pay for the work, with parts and labor broken out honestly.
| Project | Installed Price Range |
|---|---|
| Full bathroom remodel (Mr-Glass compatible) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Vanity installation | $800 – $3,000 |
What drives the number up or down: the size of the room, whether the substrate needs replacing, tile selection, and whether the layout changes. A same-footprint swap with sound substrate sits at the low end. A layout change that moves plumbing sits at the top. Every job gets a written price before work starts, so the number on day one is the number on the invoice. The work carries our 365-Day Done Right Promise, plus the manufacturer warranty on Mr-Glass components, which layered together means you’re covered twice.
DIY or Call Us?
Some checks are safe to do yourself. Run the shower for ten minutes and watch for staining below. Press along the base of the surround for soft spots. Look at the valve cartridge for drips. Take a photo of the model plate. Those are all fine and will help you get an accurate estimate.
Where DIY goes wrong on a bathroom: pulling tile without knowing whether the substrate behind it is sound, resealing a shower pan without addressing the leak causing it, or opening a wall around supply plumbing. Bathroom water damage compounds – a small leak that’s been running for two months can mean a $400 fix becomes a $3,000 subfloor replacement. We’d rather you call us for a free look than spend a weekend on a repair that fails again in six weeks. Call (888) 426-8719 and we’ll give you a straight answer before you pick up a tool.
FAQs

A properly installed bathroom with sound substrate, correct waterproofing, and a standard Mr-Glass fixture package lasts 20 – 30 years on the tile and 10 – 15 years on caulk and grout joints, which is the routine wear item. Sunnyvale’s mild climate is kind to bathrooms compared to the coast, but interior humidity is the real driver – vent the room properly and joints will hold much longer.
Sometimes, yes. A dripping valve cartridge or a failed drain gasket is a repair, not a remodel, and we’ll tell you plainly when that’s the case. If the substrate is wet or the pan has failed, repair is often a patch on a bigger problem. A free estimate tells you which situation you’re in before you spend any money.
A shower replacement runs 2 – 4 days. A full bathroom remodel takes 2 – 4 weeks depending on scope and whether permits are involved. We give you a defined arrival window on every visit and keep the job site clean throughout.
We source from the manufacturer and from recognized aftermarket suppliers, and we’ll tell you which is which in writing on the estimate. For visible trim we lean OEM. For internal components, quality aftermarket equivalents are a fair choice when they’re specified correctly. We don’t carry stock ourselves – we order what your job needs, matched to your model plate. If your other fixtures are from KraftMaid, Cambria, or Silestone, we can source those too.
Ready to get a real number? Call (888) 426-8719 for a free estimate. Our technicians have up to 22 years of experience, arrive background-checked and in uniform, and a live person answers the phone 24/7. We’re an independent remodeling contractor serving Sunnyvale – not affiliated with Mr-Glass – and we put the price and the 365-Day Done Right Promise in writing before work starts.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












