







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Driveway & Pavers: The Sunnyvale Owner’s Guide
If your ES Windows driveway and paver system has a failed component, we install ES Windows-compatible replacements and repair the surrounding hardscape. Paver driveway installation for a Sunnyvale home typically runs $7,000 – $18,000, and driveway sealing runs $250 – $700. We’re an independent service provider, not affiliated with ES Windows: we match the part to your model, quote it in writing before any work starts, and back the install with our 365-Day Done Right Promise.
Most Sunnyvale owners discover the failure the same way. A paver shifts near the driveway apron after a wet winter and the car catches a lip. Efflorescence (the chalky white bloom paver sealant blocks) spreads across the ES Windows units. Or the edge restraint, the aluminum or plastic border that holds the field in place, pops loose and the whole run starts fanning out toward the street. By the time you’re standing in the driveway at 7 a.m. looking at it, the part has usually been failing for a season.
Key Takeaways
- ES Windows paver failures are almost always the base layer or the edge restraint, not the pavers themselves.
- Installed paver driveway pricing in Sunnyvale: $7,000 – $18,000. Edge restraint and base repair are quoted line by line.
- We’re independent of ES Windows. We supply compatible parts and show you the written price first.
- Live person on the phone 24/7. Call (888) 426-8719 for a free estimate.
Which ES Windows Models This Applies To

ES Windows paver systems turn up across several product families, and the part you need depends on which one is sitting in your driveway. The likeliest candidates in a Sunnyvale home are the interlocking concrete paver and stone-veneer driveway lines and the permeable and standard patio-paver kits. ES Windows changes molds and thicknesses across product runs, so two driveways that look identical on the surface can take different edge restraints, different joint sand specs, and different base depths.
Before you buy anything, find the part marking. ES Windows stamps or labels the packaging on the original delivery, and many installers leave a sticker under the header course or on the inside face of the edge restraint. If there’s no marking, measure the paver face (length and width to the nearest 1/8 inch) and the set thickness. A paver that measures 2 3/8 inches thick won’t sit flush against a replacement that measures 2 3/4. That mismatch is the single most common compatibility gotcha we see on ES Windows driveways in Sunnyvale.
On the OEM-versus-aftermarket decision: ES Windows replacement pavers from the original line guarantee color and profile match, but the lead time can push past a month. A quality aftermarket equivalent that meets the same thickness spec will fit and drain correctly, and we’ll tell you plainly when it’s the smarter call. What we won’t do is claim to carry ES Windows stock or to have parts on a truck. There’s no parts warehouse behind this page. We source the exact part your driveway needs, then install it to the manufacturer’s spec. We also service KraftMaid, Cambria, and Silestone products across our remodeling work, though driveway work stays on hardscape.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Driveway & Pavers Is Failing
Five symptoms tell you the part has gone, and each one points at a different underlying cause worth knowing before you call anyone.
- Paver lippage near the apron: one or more pavers sit higher than their neighbors, so the car jolts as it crosses. This is almost always base settlement or a failed joint, not a bad paver.
- White bloom on the paver face: efflorescence (mineral salts wicking up through the concrete) appears when water is trapped under the surface. It signals poor drainage or a failed sealer coat.
- Loose edge restraint: the border that holds the field in place has lifted or cracked. Without it, the outer row fans out and the whole run starts moving.
- Joint sand washing out: the polymeric sand between pavers has eroded, leaving open gaps. Water runs into those gaps and drops the base, which is how a small repair becomes a full re-base.
- Lateral spreading at the street edge: the driveway has crept sideways toward the curb. This is a restraint or base failure, and it doesn’t fix itself with more sand.
Sunnyvale’s winters matter here. The wet season saturates the base, and clay-heavy soil on the eastern side of the city holds that water longer than sandier lots. That’s why we regularly see base failures in Sunnyvale show up in February and March rather than midsummer. If your driveway is on the west side near the bay, the water table and drainage pattern change the diagnosis again.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Sunnyvale paver driveway installation runs $7,000 – $18,000 installed. Here’s what drives the number, quoted line by line so you see the parts cost and the labor separately.
- Paver driveway installation, full field: $7,000 – $18,000. Price climbs with square footage, paver thickness, and whether the base needs excavation to spec.
- Concrete driveway installation: $4,500 – $12,000.
- Asphalt driveway paving: $3,500 – $9,000.
- Driveway replacement: $5,000 – $14,000.
- Driveway sealing: $250 – $700, a maintenance coat that protects the surface once the paver or base work is done.
- Paver patio installation: $3,500 – $11,000, if the same ES Windows line runs onto a patio you want matched.
The range swings on base depth (compacted gravel and sand layers under the pavers), the edge restraint type, and whether existing concrete has to be demolished and hauled. We give you a written price before any work starts, not an estimate range or a verbal ballpark. The number on day one is the number on the invoice. Every repair carries our written guarantee, and the 365-Day Done Right Promise means if the work fails inside the year, we come back and fix it at no charge, with a free second visit and no service-call fee.
DIY or Call Us?
Some of this you can check on your own, and some of it you shouldn’t touch. Here’s the honest line.
Safe to check yourself: walk the driveway and note where pavers rock or sit high; photograph the white bloom; confirm whether the edge restraint is tight against the field or has lifted; and reread your original contract for the paver spec and any part number. If the failure is a single cracked paver and the base underneath is solid, resetting one stone with fresh joint sand is a weekend job most homeowners can handle.
Where DIY goes wrong: pulling up pavers to inspect the base. Once you lift the field, the interlock and edge restraint are compromised, and if the base is saturated clay you’ll have open pavers for a wet week and a bigger problem. Base re-excavation, re-compaction, and re-setting the restraint are the work that decides whether the repair lasts five years or fails by next spring. On an ES Windows system, the restraint and base spec are the parts that keep everything tight, and a surface fix that skips them is exactly the repair that cracks again in six weeks.
Call (888) 426-8719 to schedule your free estimate. You’ll get a written number before anyone picks up a tool.
FAQs

A properly installed ES Windows paver driveway should hold up for 25 to 30 years or more, but the base and edge restraint under it are the limiting factor, not the pavers. In Sunnyvale, freeze-free weather helps the surface while wet-season saturation and clay soil stress the base. The pavers can outlast the base by a decade, which is why base repair and restraint work are the jobs we quote most often.
Often, yes. A single bad paver, a lifted edge restraint, or a run of washed-out joint sand can be repaired without tearing out the whole driveway. The decision comes down to the base: if it’s still compacted and draining, a targeted repair holds. If it’s settled or waterlogged, patching the surface just delays the failure. We tell you which you’re looking at before you commit. Call (888) 426-8719 for an honest read – the estimate is free.
A single-paver replacement or edge-restraint reset is typically a half-day to a day. Re-setting a section with base repair runs two to four days, and a full ES Windows driveway replacement depends on square footage and how much base needs excavation. We give you the timeline in the written quote so you know the arrival window and the finish date before we start.
We identify your model from the part markings or measurements, then source the correct replacement from ES Windows or a quality aftermarket equivalent that meets the same spec. We show you the parts line on the written quote before ordering, so you decide OEM versus equivalent with the numbers in front of you. Our technicians have up to 22 years of experience matching parts to the right driveway.
Call (888) 426-8719 for a free estimate on your ES Windows driveway and pavers in Sunnyvale. A live person answers 24/7, every technician is background-checked and uniformed, and the written guarantee covers the work long after the crew leaves.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












