







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Driveway & Pavers: The Sunnyvale Owner’s Guide
Replacing CGI driveway and paver components in Sunnyvale typically runs $450 – $1,200 per section when it’s a localized repair, and most jobs are scheduled within a few business days of your free estimate. We install CGI-compatible driveway and paver systems and we match the part to your actual CGI configuration rather than guessing from a photo. Owners usually find out something’s wrong the same way every time: a paver rocks underfoot after a winter of rain, a hairline crack opens along the driveway edge, or water starts pooling against the garage threshold after a storm. By then the base has usually been moving for a season or two.
A quick note on who we are: Penhallow Remodeling Sunnyvale is an independent service provider. We’re not affiliated with CGI, and we don’t manufacture their parts. What we do is evaluate what’s on your property, source the correct matching component, and install it to spec with a written price and a written guarantee before anyone touches the driveway.
Key Takeaways
- CGI paver systems are sensitive to base compaction; Sunnyvale’s clay-heavy soils shift more than most owners expect.
- Most failures show up at edges, transitions, and near downspouts, not in the middle of the field.
- Localized repair in Sunnyvale runs $450 – $1,200 per section; full driveway re-lay runs $7,000 – $18,000.
- We give you a written price before work starts and a 365-Day Done Right Promise on the install.
Which CGI Models This Applies To

CGI’s driveway and paver line has changed nominal dimensions across series, and the mistake we see most often is a homeowner ordering a replacement paver by width alone when the series also changed thickness. The older 60mm profile and the newer 80mm profile are not interchangeable in a running-bond field without re-bedding the surrounding courses. Before we quote, we measure three things on site: the actual paver face dimensions, the joint width (CGI runs tight joints in some series and wider sand joints in others), and the bedding depth visible at the edge.
Identifying your series usually means finding the manufacturing stamp on the underside of a loose or removed paver, or matching the surface texture and chamfer profile against CGI’s current catalog. If the stamp is worn, we can match by profile. The OEM-versus-aftermarket call matters here: a genuine CGI replacement keeps the color lot and dimensional consistency with what’s already laid, while a quality aftermarket equivalent may save 15-25% but will often read as a visible patch once the sun hits it. On a small repair, aftermarket is usually fine. On a field that faces the street, we’ll tell you honestly when the color match is going to bother you.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Driveway & Pavers Is Failing
- Paver rocking or “oil-canning” underfoot. The bedding sand has washed out or the base aggregate wasn’t compacted to depth. In Sunnyvale, this shows up most on driveways that slope toward the street after a wet winter.
- Joint sand eroding faster than normal. Water is channeling through the joints instead of sheeting off. Usually a drainage or grade issue, not a paver issue, and replacing pavers without fixing the grade means the same erosion returns.
- Hairline cracks along a single course. Often a sign the base has settled differentially, or a paver was laid over a high spot and has been bearing a point load. A crack in one paver is a symptom; a crack line across the driveway is a base story.
- Efflorescence (white mineral haze) that keeps coming back. Moisture is trapped under the surface. Sunnyvale’s winter rain plus clay soil holds water longer than most of the Bay Area, so efflorescence here is a moisture clue, not just a cosmetic annoyance.
- Edge restraint lifting or separating. The plastic or aluminum edge that holds the field in place has loosened, letting the outer course spread. Left alone, the spread works inward a course at a time.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what CGI-compatible driveway and paver work runs in Sunnyvale, based on the scope we see most often:
- Localized paver repair or replacement (per section): $450 – $1,200
- Paver driveway installation (full): $7,000 – $18,000
- Concrete driveway installation: $4,500 – $12,000
- Driveway replacement (full tear-out and re-lay): $5,000 – $14,000
- Driveway sealing (per job, after repair): $250 – $700
What drives the number up or down: the square footage, whether the base needs re-compaction or full replacement, how much of the existing edge restraint survives, and whether the CGI series you have still has a current production match or requires a small color-lot adjustment. Every quote is itemized in writing before work starts: parts, labor, base prep and disposal listed separately. If we open the driveway and find the base is worse than the surface suggested, we stop and re-price with you before continuing. The number on day one is the number on the invoice. The install carries our 365-Day Done Right Promise in writing.
DIY or Call Us?
Pavers are one of the more forgiving exterior components to inspect yourself. You can safely lift a single loose paver, check the bedding sand depth, look for the manufacturing stamp underneath, and photograph the joint width and edge restraint. That’s the information that helps us quote accurately, and we’re glad to have it.
Where DIY goes wrong on a CGI driveway is base prep. Replacing a paver over an uncompacted base is a cosmetic fix that fails in the first wet season, and we’ve re-done plenty of those for Sunnyvale homeowners who tried it themselves. The other no-go is cutting pavers without proper dust control. Dry-cutting silica-bearing paver material without a wet saw and rated respirator is a real health risk, not a small one. Give us a call at (888) 426-8719 and we’ll tell you straight whether your situation is a Saturday project or a job for us. Estimates are free.
FAQs

A properly installed CGI paver field should last 25 to 30 years in Sunnyvale’s climate, and often longer. What shortens that lifespan here is base failure, not paver wear: our clay soils expand and contract with wet winters and dry summers, so a base that wasn’t compacted to spec will telegraph movement up through the pavers within a few seasons. The pavers themselves hold up well; the layer underneath is what determines whether you get three decades or eight years before repairs start.
Yes, in most cases. Localized paver repair runs $450 – $1,200 per section in Sunnyvale and handles rocking pavers, cracked courses, eroded joints and lifted edge restraint without touching the rest of the field. Full replacement only makes sense when the base has failed across the whole driveway or the paver series is no longer matchable. Call (888) 426-8719 and we’ll look at it before recommending either path. Estimates are free.
A localized repair is usually a single-day job. A full driveway re-lay typically runs two to four days depending on square footage, base condition and whether the existing base needs to be stripped and re-compacted. We give you a real arrival window and a realistic duration up front, then leave the site cleaner than we found it.
We identify your series from the manufacturing stamp or the paver profile, then source the correct matching component from CGI’s current production where a match exists. If your series has been discontinued or the color lot has shifted, we tell you before ordering and lay out the aftermarket options so you can decide. We don’t carry stock on a truck; every part is ordered for your specific job.
Whether your CGI driveway needs one section re-laid or the full field rebuilt, the first step is the same: a free estimate with a written price you can hold us to and a written guarantee on the work. Our technicians have up to 22 years of experience, they’re background-checked and uniformed, and a real person answers the phone 24/7. We also work alongside KraftMaid, Cambria and Silestone on the interior side of the house, so Sunnyvale homeowners often save a visit by bundling the driveway repair with a planned project. Call Penhallow Remodeling Sunnyvale at (888) 426-8719 to schedule your free estimate.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












