A Penhallow company - serving Sunnyvale, CA
An open living room and dining area after a whole-home remodel
CGI · Sunnyvale

CGI Fence Installation in Sunnyvale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Sunnyvale
A whole-home remodel with the living, dining and kitchen areas opened up
A remodeled family room with new windows and a window seat
A remodeled primary suite with built-in wardrobes and a window seat
A remodeled staircase with wood treads and a slim metal railing
A finished basement family room with a media wall and wet bar
A single-story rear room addition with tall windows and a new patio
An open kitchen and dining area after a remodel
A freestanding soaking tub in a remodeled primary bathroom
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Fence Installation: The Sunnyvale Owner’s Guide

CGI fence installation in Sunnyvale typically costs $3,500 – $9,000 fully installed, depending on fence height, linear footage, materials, and the condition of your existing footings. We install CGI-compatible fence systems and match your remaining panels and panels’ finish so the new section reads as part of the original run. A single panel replacement can often be scheduled within the same week once materials are confirmed.

Call (888) 426-8719

Owners usually find the problem the same way: a gate that drags after two winters, a post that moves when you lean on it, or a picket line that has gone wavy along the sidewalk. In Sunnyvale’s clay-heavy soils, most fence failures start below grade, not at the panel. One post starts to lean after wet-season ground movement, and the whole run follows it. What looks like a failed panel is often a footing problem wearing a panel costume.

Which CGI Models This Applies To

A remodeled laundry and mudroom with a bench, cubbies and painted cabinets

CGI’s fence line spans several distinct systems, and the installation method differs by series, not just by color. The company’s residential lines cover privacy, ornamental, and pool-code configurations, and each has its own post size, rail spacing, and hardware set. The panel you see at the home center may not be the panel on your property.

The first thing we do on any CGI job is check the model label, usually a small sticker on the inside face of a rail or one of the posts, near the gate hinge. That label tells us the series and the panel width. If it’s sun-bleached or gone, we measure rail height and post width instead: a 1-7/8-inch post points to one system, a 2-3/8-inch post to another, and the difference matters when the replacement has to lock into the existing run without a visible seam.

On the OEM-versus-aftermarket question, CGI panels can be matched with a quality aftermarket equivalent for many common configurations, and that’s often the right call when you need one section and the OEM lead time stretches past a weather window. The tradeoff: aftermarket pickets can run a slightly different shade after a couple of years in the California sun, and they may not share the same hardware profile. When the fence is visible from the street or runs alongside a neighbor’s, we lean OEM for color match. When a run is in the side yard or behind a screen, aftermarket is a fair trade for the money. We’re an independent provider and not affiliated with CGI, so our estimate tells you plainly which parts are OEM and which aren’t.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Fence Installation Is Failing

  • Posts leaning after rain. Sunnyvale’s wet season swells the soil around the footing, and a post packed into gravel without a proper concrete collar will shift. Once one goes, the adjacent panels pull at the rail connections.
  • Rails rattling or popping out of the post. A rail that won’t stay seated usually means the punched hole in the post has wallowed out, or the fastener has backed off. This is a rail-and-hardware problem, not a panel problem.
  • Gates that drag or won’t latch. Most gate failures trace to the hinge post, not the hinges. If the post has tilted even a quarter inch, the gate swings out of plumb and the latch no longer lines up.
  • Panels with rust staining at the fasteners. Galvanized fasteners can develop surface rust in salt-air towns closer to the Bay, and those stains are the first sign that water is getting behind the joint and into the panel.
  • Pickets that look wavy along the top. A wavy picket line is almost always a footing issue showing up two panels downstream. The picket isn’t bent; the posts holding it have moved.

If you’re seeing two or more of these at once, the fence run is telling you its footings need a look, not just its panels.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled hall bathroom with patterned floor tile and painted walls

Fence installation in Sunnyvale for a CGI-compatible system runs $3,500 – $9,000 installed. Here’s what drives the number up or down:

Scope Typical Range
Single section replacement (panel + hardware) $350 – $900
Gate replacement (frame, hardware, latch) $700 – $2,000
Full residential run, standard height $3,500 – $9,000
Footing repair / post reset (per post) $250 – $600

What moves you toward the top of the range: taller privacy panels, more linear footage, footing work on soft clay, and the extra labor of matching a sun-faded existing finish. Every job gets a written price before work starts, so the number you see on the estimate is the number on the invoice. Parts and labor are broken out line by line. The work is backed by our written guarantee and the 365-Day Done Right Promise: if a post we set or a panel we hung fails inside that year, we come back and fix it at no charge, no service-call fee.

DIY or Call Us?

A homeowner can safely handle a few things on a fence: clearing vegetation away from the base, wiping down panels to spot rust stains early, tightening the screws on a gate latch, and checking whether a gate drags on the latch bolt or on the ground. Those checks tell you a lot about where the real problem sits.

Where DIY goes wrong is the footing. Digging out and resetting a fence post by hand in Sunnyvale clay is hard work, and a post set with a bag of quick-set and an hour of patience usually looks fine until the next wet season. Pulling a post isn’t dangerous the way a garage-door spring is, but a 6-foot privacy panel is heavy, awkward, and wants to fall on the person holding it. A fence that’s holding up a gate or sitting near a property line is not a weekend project to learn on.

Call (888) 426-8719 and we’ll walk you through what we’re seeing, what the part costs, and what the install takes. Our technicians have up to 22 years of experience and they’ll tell you honestly whether you need a full run or one section reset.

FAQs

A small remodeled galley kitchen with cabinets to the ceiling

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A powder room with botanical wallpaper and a stone sinkA remodeled kitchen with a waterfall island and wood cabinetsA wood double vanity with two mirrors after a bathroom remodelA finished backyard cottage with a small covered porchA walk-in shower with large-format tile and a built-in nicheA wide opening with a new beam where the kitchen wall was removed

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Penhallow in Sunnyvale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Sunnyvale team

A local vetted partner works across Sunnyvale and the towns around it, to the same written standard as every Penhallow job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 426-8719
Local Service Coverage

Request a Free Estimate in Sunnyvale

Tell us what you need - Penhallow Remodeling Sunnyvale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch