







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Sunnyvale Owner’s Guide
If you have a Boral clay or concrete tile roof that’s cracking, slipping or leaking, we install Boral-compatible roofing and repair failing tiles across Sunnyvale. Full roof replacement here typically runs $8,000 – $20,000, and individual tile or repair work ranges from $400 – $1,800 depending on what’s failed. We’re an independent service provider, not affiliated with Boral, and we give you a written price before any work starts.
Owners usually find out something’s wrong the slow way. A tile cracks after a hot week and the next rain puts a stain on the ceiling in the hallway. A piece of flashing pulls loose at the chimney and water tracks down a valley you can’t see. Or a neighbor’s roofer points out that the ridge tiles on your Sunnyvale home have backed out of their mortar and the underlayment underneath is older than it looks. Once you’re up there looking, the question stops being whether something failed and becomes which components failed, and whether you can still match them.
Which Boral Models This Applies To

Boral makes both clay and concrete roof tile, and the exact profile matters more than most owners expect. The common concrete lines on Sunnyvale roofs are flat-profile tiles like the Saxony and Madera series, while the clay side includes barrel profiles like the Capistrano line and the flat Villa tile. A repair that uses the wrong profile won’t line up at the lap, and on a steep pitch that misalignment is where water gets in first.
To identify what’s on your roof, don’t guess from the ground. Get a close photo of an unbroken tile and measure its width at the widest edge and its length, plus the exposed course depth (how much of each tile shows above the one below it). Those three numbers tell you the series far more reliably than color. Boral has discontinued and revised profiles over the years, so a tile that matched the catalog a decade ago may only be available through salvage or as a close aftermarket equivalent. We don’t claim to carry parts on a truck or stock Boral tiles locally; we source the match for your specific profile, and we tell you up front when an exact match means a salvage piece versus when an aftermarket tile will do the job without anyone noticing from the street.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Roofing Is Failing
Concrete and clay tiles are tough on top but brittle at the edges, and Sunnyvale’s combination of dry summers and the occasional hard winter storm is exactly the kind of cycle that finds the weak points. Here’s what usually shows up first:
- Cracked or chipped tiles near the ridge or valleys. Thermal movement across hot days flexes the tile, and hairline cracks at the fastening holes or corners are the first sign. Once cracked, the tile no longer sheds water the way it should.
- Tiles slid out of line or off the roof. A single tile that’s walked down its course usually means the fasteners rusted through or the underlayment beneath has let go. It’s rarely just one tile for long.
- Crumbling mortar at the hips and ridge. Ridge and hip tiles are bedded in mortar, and that mortar dries and cracks in the sun. Water gets behind it and the tile can lift in a wind.
- Ceiling stains or damp attic sheathing after rain. This is underlayment failure, not a tile problem per se. The tile is doing its job, but the moisture barrier under it has aged out and the water goes straight to the deck.
- Granules or fine debris in the gutters. Concrete tile surfaces break down slowly, and grit plus bits of underlayment in the gutter after a dry stretch tells you a layer is failing above you.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Roof repair in Sunnyvale runs $400 – $1,800 for the tile or flashing work, and a tile roof repair specifically sits in the $600 – $2,500 range when you’re matching and replacing a section rather than one tile. Full replacement is $8,000 – $20,000. What pushes you toward the top of the band: multiple valleys or hips needing work, a full underlayment replacement under a sound tile field, or a discontinued profile that requires salvage sourcing.
Every repair comes with a written price before we start and a written guarantee on the work. If the repair fails inside the guarantee period, we come back and fix it at no charge, and we don’t add a service-call fee for that return visit. You’ll know what the part, the labor and the disposal cost separately, so you can see where your money is going. Our technicians have up to 22 years of experience with tile and flashing work.
DIY or Call Us?
Here’s the honest split. You can safely inspect from the ground with binoculars, photograph the problem tile from a ladder you’ve footed properly and kept off the roof, and check for ceiling stains and gutter grit inside the house. What you shouldn’t do is walk a tile roof to lift, cut or re-bed a tile yourself. Tile roofs are walk-on-with-care surfaces that crack under a misplaced foot, and a fall from a Sunnyvale two-story is a serious injury. Broken tiles you cause are also an extra cost on top of the original repair.
Flashing work at a chimney or wall intersection is where most DIY tile repairs go wrong in the first place. The lap has to be right, the underlayment has to be tucked correctly, and the fasteners have to be the right type, or you’ll be back on the roof in a season. If you’re unsure whether the crack is cosmetic or water is getting in, call us at (888) 426-8719. A live person answers any time, and we’ll schedule a free estimate to look at the actual problem rather than talk you into a replacement you may not need.
FAQs

Boral concrete tile typically lasts 40 to 50 years and clay tile can last well past that, but the tile isn’t usually what fails first. The underlayment beneath it, the flashing, and the mortar at hips and ridges age out long before the tile does, which is why a 25-year-old roof can leak through sound tiles. Call (888) 426-8719 for an inspection that separates tile life from underlayment life.
Yes, a single cracked or slipped tile can usually be replaced on its own if the profile is still matchable and the surrounding fasteners and underlayment are sound. Section replacements make sense when several tiles in a course have failed together or the mortar at a hip is going. The inspection tells you which one you’re facing, and the written estimate tells you the cost before anything starts. Call (888) 426-8719 to get that estimate scheduled.
A single tile replacement is usually a short visit, often under an hour on the roof, while a section or hip-and-ridge repair can take most of a day. The longer part is often sourcing the matching profile if yours is discontinued, which is why we ask for photos and measurements before the appointment. Call (888) 426-8719 to start the match and get a firm written time.
We match by profile, width, length and exposed course depth, not by color, then confirm against what’s actually installed on your Sunnyvale roof. When the exact series is still in production, we source it; when it’s been retired, we find a salvage match or a close aftermarket equivalent and tell you plainly which one it is. We don’t claim to keep Boral parts stocked. Call (888) 426-8719 and we’ll walk through your options.
If your Boral tile roof needs repair, a match or a straight answer on whether it’s the tile or the underlayment, give us a call at (888) 426-8719. We’ll schedule a free estimate, put the price for the parts and labor in writing before any work starts, and stand behind the repair with our 365-Day Done Right Promise. We also work with trusted trade brands like KraftMaid, Cambria and Silestone for homeowners who are remodeling alongside a roof repair.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












