







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Kitchen Remodeling: The Sunnyvale Owner’s Guide
Boral kitchen remodeling in Sunnyvale typically runs $14,000 – $45,000 installed, depending on layout, whether you’re keeping the cabinet boxes, and which countertop and backsplash materials you choose. Boral is a building products brand, not a single part, so the failure usually shows up in one component: a cultured marble or cast vanity top that has cracked at the drain, a brick or stone veneer face lifting off a backsplash, or a mortar joint opening where the counter meets the wall. Owners find it the same way every time. A hairline crack appears near the sink, a tile sounds hollow when tapped, or a caulk line that was tight last spring has pulled away from the wall by fall.
Which Boral Models This Applies To

Boral makes several product lines that land in a Sunnyvale kitchen, and they don’t fail the same way. Their cultured marble and cast polymer vanity tops and countertops come in named collections with set bowl configurations; the model stamp is usually on the underside of the top or on a label inside the cabinet, and it tells you the bowl shape, the edge profile, and the exact depth. Boral’s manufactured stone veneer (the brick, ledge stone and ashlar profiles) is a different animal, sold by profile name and by square-foot carton, and it’s specified by profile and color rather than by a single part number.
That’s the compatibility gotcha most homeowners miss: a replacement cultured marble top has to match the existing cabinet’s depth and the bowl cutout, and a “standard” 22-inch depth won’t drop into a 21-inch cabinet run without a filler strip and a re-set faucet. On the veneer side, matching a profile by eye gets you close but not exact, because dye lots shift between production runs. Photograph the label, measure the depth and the bowl, and check the profile name against the carton before you order.
On OEM versus aftermarket: for the cast tops, an exact Boral replacement is the cleanest match but not always the fastest. A quality aftermarket cast or solid-surface top cut to your dimensions often fits and lasts as well, and can be produced faster. For veneer, stick with the same profile line when you can. When you can’t, a full re-face of the backsplash or the surround is usually the better answer than forcing a near-match. We also work with KraftMaid, Cambria and Silestone on the surrounding cabinetry and counter work, so the Boral piece lands inside a finished kitchen, not next to a gap.
Penhallow Remodeling Sunnyvale is an independent remodeling company. We are not affiliated with Boral.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Kitchen Remodeling Is Failing
- A hairline crack radiating from the sink or drain opening. Cast polymer tops flex slightly under a hot pot or a heavy load, and the cutout is the weakest point. The crack starts small and grows along the grain of the casting.
- A hollow sound when you tap a veneer or backsplash stone. That hollow tone means the bond has let go behind the piece. In Sunnyvale’s dry summers followed by wet winters, the wall behind a veneer face moves more than the stone does, and the adhesive takes the strain.
- Caulk joints pulling away where the counter meets the wall. The joint opening up is a moisture path, not a cosmetic issue. Water gets behind the top and into the cabinet edge, and the damage happens out of sight.
- Staining or a soft, chalky feel on the surface. Cultured marble and cast tops carry a gel coat that wears through with abrasive cleaners and scrubbing. Once it’s gone, the surface absorbs and never comes back to a clean finish.
- Loose or lifting stone at the edge of a backsplash or island face. Adhesive failure at the perimeter is the first stage of a piece coming off. It’s also the point where a small repair is still cheap.
Replacement Cost & What’s Included

For a Sunnyvale kitchen, here’s what the work actually runs. The full kitchen remodel lead range is $14,000 – $45,000. If you’re replacing only the Boral top or backsplash inside an otherwise sound kitchen, you’re looking at the smaller line items: countertop installation at $2,000 – $6,500, backsplash installation at $800 – $2,500, and cabinet installation at $4,000 – $13,000 if the boxes need to come out to do it right.
What drives the number up or down: the length of the counter run, the number of sink and cooktop cutouts, the edge profile, and whether the cabinets stay in place. A 6-foot vanity top with one bowl is a different job than a 20-foot kitchen perimeter with two cutouts and a waterfall edge. You get a written price before any work starts, so the number on day one is the number on the invoice. The work carries the 365-Day Done Right Promise in writing, and if a repair fails we come back at no charge with no service call and no re-inspection fee.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some things you can safely check yourself. Photograph the model label, measure the top depth and the bowl, tap along the veneer to find hollow spots, and note where the caulk has failed. That’s information, not repair. Where it goes wrong is the actual swap: lifting a cast top off a cabinet run without cracking the adjacent pieces, cutting a new bowl opening to the right size, and re-bonding veneer so it holds through a Sunnyvale summer. A cast top is heavy and brittle, and a dropped or over-flexed top fails at the drain. Getting the substrate clean and flat before you re-bond stone is the whole job, and it’s the step most homeowner attempts skip.
Our technicians have up to 22 years of experience and arrive background-checked and in uniform. Call (888) 426-8719 to schedule a free estimate. A live person answers, day or night.
FAQs

A well-installed Boral cultured top or veneer backsplash typically gives 15 to 25 years before the surface or the bond starts to show its age. Sunnyvale’s dry summers and wet winters work the wall and the adhesive harder than a steady climate would, so the caulk joints and the perimeter bond are what you’ll be watching first. Call (888) 426-8719 for an exact quote on your kitchen. Estimates are free.
Sometimes. A hairline crack at the drain can be repaired with a color-matched fill and it holds well if the crack hasn’t spread. A single lifting veneer piece can be re-bonded. Once the gel coat is worn through across the surface or several pieces have let go along a run, replacement is the better spend. Call (888) 426-8719 and we’ll tell you which side of that line your kitchen is on.
A countertop or backsplash-only replacement is usually a one-day job for the install itself, plus the cure time before you can load the counter. A full kitchen remodel that includes new cabinets and a Boral top runs one to three weeks of working days depending on scope and material lead times. Call (888) 426-8719 to schedule your free estimate.
We identify your model from the label or the measurements, then order the match through the manufacturer’s supply channel or a quality aftermarket equivalent cut to your exact dimensions. We’re upfront about lead times before you commit, and we don’t guess at a match. Call (888) 426-8719 and we’ll tell you what’s available for your model.
Get a Written Price on Your Sunnyvale Kitchen
If your Boral top has cracked, your veneer is lifting, or you’re ready to plan the remodel around a failing surface, call Penhallow Remodeling Sunnyvale at (888) 426-8719 for a free estimate. You’ll get a written price before any work starts, an arrival window we hold to, and the 365-Day Done Right Promise in writing on every project. We operate under The Kingswell Way: say the price before the work, show up in the window we gave, and leave the place cleaner than we found it. That’s the standard on a $2,000 backsplash and on a $45,000 kitchen alike.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












