







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Fence Installation: The Sunnyvale Owner’s Guide
We install Tamko-compatible fence systems across Sunnyvale, and most residential jobs land between $3,500 and $9,000 installed, depending on linear footage, height and material. Tamko is best known for roofing and waterproofing, so when a homeowner calls us about a “failed Tamko part,” it almost always turns out to be a gate hardware component, a post anchor or a section of composite infill attached to a fence that was built with Tamko composite decking, not a Tamko-branded fence panel. We sort that out before quoting. Fence work is planned work, so we schedule it inside a defined arrival window rather than promising same-day.
Key Takeaways
- Most Sunnyvale fence installations we quote fall in the $3,500 – $9,000 range installed.
- Tamko makes roofing and composite decking, not a full fence line; getting the part identified correctly is step one.
- Sunnyvale’s dry summers and winter rain cycles age fence components unevenly, and gate hardware usually fails first.
- We don’t keep parts on a truck. We source what your fence actually needs and quote it in writing before work starts.
Which Tamko Models This Applies To

Tamko’s Heritage and Titan XT lines are roofing products, and its composite decking lines are where most fence-adjacent Tamko material in Sunnyvale comes from. Homeowners often build fence panels, gates or privacy screens from Tamko composite deck boards and then have hardware or fasteners fail. If you’re trying to match a part, start by identifying what you actually have: look for the Tamko stamp or label on the board end, measure the board profile in inches (thickness and width matter more than length), and photograph the failed hardware from two angles before you call anyone. Model numbers live on the original packaging and on the board stamp, not on the fence itself.
On the OEM-versus-aftermarket question, here’s the honest answer: for composite deck board used in fence panels, matching profile and color is what matters, not the label. A quality equivalent of the same profile works fine. For gate hinges, latches and post bases, we lean on recognized hardware brands because the failure mode is mechanical stress, not brand loyalty. If you want cabinetry or countertop work done alongside a larger yard project, we also install KraftMaid, Cambria and Silestone, and we’re happy to quote those together.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Fence Installation Is Failing
- Gate sagging on the latch side. Hinge screws have pulled or the post has shifted. This is the most common call we get in Sunnyvale because gate hardware takes the load a panel never does.
- Composite board ends swelling or crumbling. Moisture got into a cut end that wasn’t sealed. Tamko composite needs sealed cut ends, and a fence built without that step fails faster than the board itself should.
- Posts leaning after winter rain. Sunnyvale’s clay-heavy soil expands when wet, and a post set without proper depth or drainage will lean within a season or two.
- Loose or popped fasteners along a rail. Thermal movement over hot summers works screws loose over time. Missing or stripped screws let panels rack and open gaps.
- Color fading or chalking on one side only. Uneven UV exposure across a fence line usually means the boards were mixed from different production runs.
Replacement Cost & What’s Included

Fence installation in Sunnyvale typically runs $3,500 – $9,000. What drives the number: linear footage, height (a 6-foot privacy fence costs more than a 4-foot one), whether posts need to be replaced or just re-set, and whether you’re matching existing composite or switching material. Our written quote breaks out parts and labor separately so you can see exactly what the hardware, posts and panels cost versus the install.
| Scope | Typical installed range |
|---|---|
| Fence installation, full run | $3,500 – $9,000 |
| Gate hardware and re-hang (typical) | Quoted line-item |
| Post replacement and re-set (typical) | Quoted line-item |
Every fence job we take on carries the 365-Day Done Right Promise in writing. If the work fails inside that year, we come back and fix it at no charge, and there’s no service call or re-inspection fee if a return visit is needed.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely handle the inspection side yourself: photograph the failed part, measure the board profile, note which posts are leaning and which gate is dragging, and check whether any fasteners are visibly missing. That information saves everyone time on the quote.
Where DIY goes wrong is at the structural end. A fence post set without proper depth and drainage will lean again within a season in Sunnyvale’s soil, and gate hardware hung without checking whether the post itself is sound just delays the failure. Tamko composite cut ends also need sealing, and skipping that step shortens board life noticeably. We’re an independent service provider, not affiliated with Tamko, so we’ll tell you plainly whether your existing material is worth repairing or replacing. Call (888) 426-8719 and we’ll walk through it with you.
FAQs

A properly installed Tamko composite fence should last 20 to 30 years, with gate hardware needing replacement or adjustment every 5 to 10 years. Sunnyvale’s dry summers and wet winters are harder on posts and hardware than on the composite boards themselves, so post-setting depth matters more than the board rating. Call (888) 426-8719 for an exact quote on your fence; estimates are free.
Often yes. If the panels are sound and only hardware or one post has failed, a targeted repair costs far less than a full run. We’ll tell you straight if repair isn’t worth it rather than sell you a replacement you don’t need. Call (888) 426-8719 to schedule a free estimate.
Hardware and gate repairs are usually a single visit; a full fence run depends on linear footage and post condition. We give you a defined arrival window and a written price before any work begins, so the number on day one is the number on the invoice. Call (888) 426-8719 to get your estimate scheduled.
We source to what your fence actually has, based on the profile measurements and photos from the inspection, not on guesswork. We don’t keep parts on a truck, so we confirm availability before we quote. Call (888) 426-8719 and we’ll sort out what you need.
Contact
Whether it’s a gate that won’t latch, a leaning post or a full new fence line, we’ll put the price and the guarantee in writing before anything gets touched. Our technicians have up to 22 years of experience, they’re background-checked and arrive in uniform, and a live person answers the phone around the clock. Call Penhallow Remodeling Sunnyvale at (888) 426-8719 for a free estimate.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












