







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Windows & Doors: The Sunnyvale Owner’s Guide
We install Tamko-compatible windows and doors for Sunnyvale homeowners, and full replacement typically runs $4,500 – $15,000 for standard windows or $8,000 – $25,000 for impact-rated units, depending on count, frame material and glass package. We’re an independent service provider, not affiliated with Tamko. Most owners don’t discover a failed component until the symptom shows up: a sash that won’t seal against the jamb, a door that drags the threshold in the afternoon heat, or a fogged double-pane with water between the glass. That visible clue is the end of a chain – usually worn weatherstrip, a shot window balance, or a failed seal in the insulated glass unit. Once you notice it, the clock is running on the rest of the assembly.
Which Tamko Models This Applies To

Tamko’s window and door line spans vinyl single- and double-hung units, horizontal sliders, casement and awning windows, and sliding and hinged patio doors. Replacement parts aren’t universal across those lines. A balance assembly that fits one series won’t seat in another, and glazing stops and weatherstrip profiles change by frame profile and by production year. To identify what you have, find the manufacturer’s label – on vinyl hung windows it’s usually tucked in the head jamb channel, visible with the sash lowered – and note the series name plus the size code. If no label survives, measure the visible glass width and height, the overall frame, and the balance channel depth.
On the OEM-versus-aftermarket call, the honest answer is that it depends on the part. Weatherstrip and glazing spline have good quality aftermarket equivalents, and matching the profile matters more than the badge. Balances, hinge sets and lock hardware are where we lean OEM or a proven equivalent, because the tolerances and the mounting holes have to line up exactly. If the insulated glass unit has lost its seal, the replacement is a made-to-order unit sized to your frame regardless of who supplies it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Windows & Doors Is Failing
- A fogged or cloudy pane with moisture between the glass. The seal on the insulated glass unit has failed and outside air is getting in. Cleaning won’t fix it because the fog is inside the sealed cavity, so the glass has to be replaced, not wiped.
- The sash won’t stay up, or drops when you let go. The window balance has lost tension, typically a broken spring or a worn shoe. That’s a mechanical failure, not a cleaning issue, and forcing the sash up and down speeds it along.
- Daylight or a draft around the sash edge. The weatherstrip has flattened or pulled loose from its kerf. In Sunnyvale this one shows up as dust and pollen on the sill even when the window is latched shut.
- The door drags, sticks, or won’t latch cleanly. A worn hinge, a rolled roller on a slider, or a strike plate that has shifted. Left alone, the dragging edge grinds the frame and turns a hardware swap into a larger repair.
- Water staining or soft wood on a jamb or sill. The seal between frame and wall has opened up, or the sill pan has failed. This is the one to address first because the damage behind the trim can outrun the cost of the window itself.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Sunnyvale, window replacement runs $4,500 – $15,000 and impact window installation runs $8,000 – $25,000, both installed. The range is driven by unit count, frame material, glass package, and how much trim and stucco work the opening needs once the old unit comes out. A single glass unit or a set of balances sits at the bottom of a repair job; a full-opening replacement with new flashing and interior trim pushes toward the top.
| Scope | Typical installed range |
|---|---|
| Window replacement (whole-home, standard glass) | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
| Individual component repair (balance, hinge, weatherstrip) | Quoted per part, lower end of the range |
Every Penhallow job gets a written price before any work starts – the number on day one is the number on the invoice, with no change orders. Materials come from recognized brands like Therma-Tru alongside Tamko-compatible assemblies. The work carries our 365-Day Done Right Promise, and if a repair fails inside that window we come back at no charge.
DIY or Call Us?
Some of this you can safely check yourself: verify the label and model, measure the opening and the glass, look for daylight around a closed sash, and photograph the balance channel. Those facts make the eventual quote faster and sharper. What we’d steer you away from is the harder work. Pulling a sash to swap a balance or a hinge on a raised or upper-floor window is where people get hurt – a dropped sash is heavier than it looks, and the wrong tool at the wrong angle can crack the glass. Setting a full replacement unit and reflashing the opening is a two-person job with a real water-management sequence, and getting the flashing wrong is how you end up with the sill rot you were trying to prevent. For those, call a professional.
Call (888) 426-8719 for a free estimate – a live person answers around the clock, and our background-checked, uniformed technicians will tell you plainly whether you need a part or a unit.
FAQs

Vinyl window assemblies and patio doors commonly last 20 to 30 years before the frame and glass need replacing, though the parts inside fail sooner. Weatherstrip typically needs replacing around year 8 to 12, and window balances around year 10 to 15. Sunnyvale’s mild climate is gentler than inland heat, but the winter wet season is hard on sills and weather seals, so check those annually. Call (888) 426-8719 for an exact quote – estimates are free.
Yes, in many cases. A single broken balance, a set of hinges, a lock, or worn weatherstrip can usually be swapped without touching the frame. A failed insulated glass unit can also be replaced on its own. Full replacement makes more sense when the frame is warped, multiple seals have failed, or there’s water damage in the jamb. We’ll tell you which one you’re looking at before quoting anything. Call (888) 426-8719 to schedule your free estimate.
Replacing a component like a balance, hinge or weatherstrip usually takes under an hour per window. A single insulated glass unit swap is often a same-visit job. A whole-home window replacement is typically a full day or more depending on unit count and whether the openings need trim or flashing work. We give you a real arrival window and hold to it. Call (888) 426-8719 to get started.
We match the part to your specific Tamko series and size code from the label, then order OEM or a quality equivalent based on what the part is. We don’t claim to carry stock or parts on a truck – we source the right part for your unit rather than forcing a generic fit. Call (888) 426-8719 to schedule your free estimate.
We also install and service KraftMaid, Cambria, and Silestone products for homeowners updating the spaces around their windows and doors.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












