







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Windows & Doors: The Sunnyvale Owner’s Guide
We install Schluter-compatible windows and doors for Sunnyvale homeowners, and full window replacement here typically runs $4,500 – $15,000, while impact-rated units can reach $8,000 – $25,000. We work on planned replacements, so expect a scheduled install window, not a same-day drop-in. Most owners find out something’s wrong the same way: a draft along the frame on a cold morning in the Hillsdale or Cherry Chase area, a door that suddenly won’t latch square, or a corner of glass that fogs between the panes after a wet January.
That fogging is the tell people miss. It means the seal inside the insulated glass unit (IGU) has failed, and no amount of caulk on the outside will fix it.
Key Takeaways
- Window replacement in Sunnyvale: $4,500 – $15,000. Impact-rated: $8,000 – $25,000.
- Fog between panes means a failed IGU seal, not a cosmetic issue.
- We’re an independent remodeling contractor, not affiliated with Schluter.
- Written price before work starts, backed by the 365-Day Done Right Promise.
Which Schluter Models This Applies To

Schluter Systems is best known for tile and waterproofing products, so if you have a Schluter profile or trim piece around a window reveal or a door threshold, that’s the more likely match. When homeowners call us about “Schluter windows and doors,” they’re usually referring to a specific window or door unit and want to know whether the trim and flashing system around it can be matched. The first thing to do is find the label.
Most window and door units carry a manufacturer’s sticker on the frame or in the jamb channel, and it lists the series, the glass spec, and the rough opening size. Photograph it before anything else. If the label is gone, measure the visible glass and the frame depth instead – those two numbers usually narrow the field to one or two candidates.
On the OEM question: factory parts fit the first time and carry the maker’s warranty. Quality aftermarket equivalents cost less and work fine for trim, weatherstripping, and hardware, but for the glass unit itself we lean OEM or a certified glazing shop’s replacement, because the seal spec matters in Sunnyvale’s marine-influenced air. We don’t stock parts or carry them on a truck. We source what your unit needs and bring it to the job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Windows & Doors Is Failing
- Fog or condensation between the panes. The IGU seal has broken and moist air is trapped inside. It won’t clear on its own, and it gets worse each season.
- A draft you can feel along the frame. Weatherstripping has flattened or the frame has shifted. In Sunnyvale’s older Eichler-era homes, this often traces to settling rather than the part itself.
- The door drags or won’t latch. The hinge or the frame has moved out of square. Adjusting the hardware buys time, but a persistent drag usually means the opening needs attention.
- Water staining at the sill or reveal. Flashing or the sealant line has failed. Left alone through a rainy stretch, this is the failure that rots the framing behind the wall.
- Visible cracks or chips in the glass. A crack spreads with heat cycling. In direct-sun exposures here, a chip can turn into a full break within weeks.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Window replacement in Sunnyvale runs $4,500 – $15,000 for a typical whole-home or multi-window job, and impact window installation runs $8,000 – $25,000. What drives the number up: the number of openings, whether the frame is wood or vinyl, the glass package (low-E, argon, impact-rated), and whether the rough opening needs work. A straight swap costs less than a job where we find rot behind the trim.
We quote parts and labor as a written line-item price before any work starts, so the number on day one is the number on the invoice. Hardware and weatherstripping sit at the low end; a full IGU and frame repair sits higher; a whole-unit replacement sits at the top. Every install carries our 365-Day Done Right Promise: if it fails inside the year, we come back and make it right at no charge, and a failed repair gets a free return visit with no service call fee.
| Scope | Typical Sunnyvale Range |
|---|---|
| Window replacement (multi-window) | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
DIY or Call Us?
You can safely check a few things yourself: look for the label, photograph it, feel for drafts with a damp hand along the frame, and check the sill for soft wood or staining. What we’d steer you away from is pulling a window or door unit out of the wall on your own. If the opening isn’t flashed and sealed correctly on the way back in, water gets behind the wall and you won’t see the damage for a season. That’s a repair that costs far more than the original job.
Glass work and frame removal also carry real injury risk if a unit shifts or a pane breaks. Our technicians are background-checked, arrive in uniform, and have up to 22 years of experience. If you’re unsure whether you’re looking at a part failure or a framing problem, call us and we’ll tell you straight. Reach us at (888) 426-8719.
We also handle KraftMaid, Cambria, and Silestone materials alongside our window and door work, so if you’re remodeling a room and the windows are part of it, we can quote the whole scope in one written number.
FAQs

A quality unit typically lasts 20 – 25 years, but the glass seal often fails before the frame does, especially on west-facing units that take the afternoon sun. Once the IGU fogs, you’re usually looking at replacement of the glass even if the frame is sound.
Sometimes. Weatherstripping, hardware, and hinge adjustment are straightforward repairs. A fogged IGU can be replaced without pulling the whole unit if the frame is solid. A cracked pane or a rotted frame means replacement. We’ll tell you which one you’re facing before you spend anything.
A single window or door unit usually takes a few hours; a multi-window job runs one to three days depending on access and whether the rough opening needs work. We give you a written arrival window and stick to it.
We identify the series from the label or measurements, then order the matching part from the manufacturer or a certified glazing supplier. We don’t keep parts on hand, so lead time depends on the unit – we’ll tell you the expected date before you commit.
Call (888) 426-8719 for a free estimate. A live person answers around the clock, and you’ll get a written price before any work starts.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












