







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Sunnyvale Homeowners Choose Mr-Glass Construction
We provide independent Mr-Glass construction repair and installation service in Sunnyvale, CA. We are not affiliated with, sponsored by, or authorized by Mr-Glass; we’re an independent company that works with the brand’s trim profiles, panel systems, and hardware tolerances on every job. That focus is the difference: we install and repair Mr-Glass Elite frameless enclosures, ProSeries sliding doors, Custom Mirror & Glass partitions, and VinoSeries railing systems with the fit and finish the product was engineered for.
Sunnyvale’s housing runs from 1950s orchard-era ranch homes to new El Camino Real townhomes, and both end up needing glass work done to a high standard. Our technicians have up to 22 years of experience, and we give you a written price before any work starts. Call (888) 426-8719 for a free estimate.
Why Trust Penhallow Remodeling Sunnyvale for Your Mr-Glass Construction?

Mr-Glass products live or die on tolerances most general contractors never stop to think about: the gap between a frameless panel and a curb, the way a sliding door’s roller rides in a track, the torque on a clamp hinge. We know where those tolerances sit, and we know what happens when they’re missed. A frameless shower enclosure set an eighth of an inch out of plumb will hold water until the silicone gives, then leak for years before the homeowner finds the cause.
We source OEM Mr-Glass replacement parts, including hinges, seals, and rollers, when they’re available, so the warranty stays intact. When OEM parts aren’t available, we use aftermarket equivalents that meet or exceed original specifications, and we tell you plainly which you’re getting. Our technicians are background-checked and arrive in uniform.
Warranty-safe practice matters on safety glass. We don’t drill, shim, or torque a panel in a way that voids coverage, and we document what we find before we touch anything. Under The Kingswell Way, you get a written price before the work, a real arrival window, and a 365-Day Done Right Promise in writing. If something fails inside that year, we come back and fix it at no charge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Fix in Sunnyvale
Sunnyvale’s mix of older orchard-era homes and newer El Camino Real infill produces a specific set of Mr-Glass problems. Here’s what we see most.
- Seal failure and water intrusion behind Mr-Glass Elite frameless enclosures. The silicone at the curb and wall junctions breaks down, or the wall studs shift slightly over the years and stress the glass. Water seeps under the panel, and the fix is a full reseal with the enclosure removed, not a bead of caulk squeezed into the gap.
- Misaligned tracks and rollers in Mr-Glass ProSeries semi-frameless sliding doors. The bottom track fills with mineral deposits and the rollers flat-spot, so the door binds. When it binds, the glass takes stress at the hanger points. Left alone, that stress becomes a crack. Realigning the track and replacing the rollers solves most of these.
- Corrosion and pitting on clamps and hinges. Sunnyvale’s mild coastal-influenced air and wet winters work on chrome and brass fittings. Pitted clamps lose their grip, and a clamp that slips cracks the glass at the hole. Replacement with the right alloy stops the cycle.
- Chips and edge damage from improper installation. Mr-Glass tempered panels are sized to the opening, and if a panel is set with too little clearance, the edge contacts the frame or tile and chips. A chipped edge on tempered glass is a failure waiting to happen, and the panel has to come out.
- Undocumented prior glass work in older Sunnyvale homes. In the Cherry Chase and Lakewood areas, we regularly find enclosures installed over walls that were never properly blocked, plus older additions that were never permitted. The glass is fine; the wall behind it isn’t, and we flag it before we reinstall anything.
Mr-Glass Parts & Our Repair-vs-Replace Approach

We don’t stock Mr-Glass parts locally, so every part is sourced for your specific job after we’ve diagnosed it. That’s slower than pulling a generic hinge off a shelf, and it’s the only way to keep your warranty intact. OEM Mr-Glass hinges, seals, and rollers come from the manufacturer when they’re available. When they’re not, we use aftermarket parts that meet or exceed original specifications, and we tell you which you’re getting before we order.
Repair or replace? We answer that honestly. A ProSeries door with worn rollers and a scuffed track is a repair. An Elite enclosure with a chipped tempered panel, corroded clamps, and a wall that’s shifted is usually a replacement, because a patched safety-glass assembly is a liability you don’t want. We’ll tell you which one your job is and why.
Call (888) 426-8719 and we’ll walk you through it. Estimates are free.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We inspect the enclosure or door in place: check plumb and level, look for chips and stress marks at the edges, test the track and rollers, and probe the silicone at the curb. For a leak, we find the actual entry point instead of guessing.
- 2
Written price and parts order. You get the number in writing before any work starts, including whether we’re using OEM Mr-Glass parts or aftermarket equivalents. Then we order what the job needs.
- 3
Repair or install. Panels come out, the wall and curb get inspected, corroded hardware gets replaced, and the enclosure goes back in with proper clearances and fresh silicone. On a new install, we set the panels to the manufacturer’s tolerances, not to what looks close.
- 4
Test. We run water against the enclosure and check the door’s slide and latch. If it leaks or binds, we’re not done.
- 5
Warranty. Every job comes with a written guarantee and our 365-Day Done Right Promise. If a repair fails inside the year, we come back at no charge, no service call fee.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Sunnyvale

We work with all four Mr-Glass product families: Elite frameless shower enclosures, ProSeries semi-frameless sliding shower doors, Custom Mirror & Glass interior partitions, and VinoSeries glass railing systems. That covers new installation, full replacement, and repair across each line.
Most of our Sunnyvale work is on shower enclosures and doors, which is where the wear shows first. We also handle tub-to-shower conversions and walk-in shower installs where a Mr-Glass enclosure is part of the plan. If your home has a partition or railing system that needs attention, we’ll take a look at that too.
We Also Service These Brands
Mr-Glass is a focus, not the only brand we know. We install and service KraftMaid cabinetry, Cambria, Silestone, and Caesarstone countertops, and Kohler fixtures, and we bring the same standard to each. If your project involves a Mr-Glass enclosure plus a vanity and countertop, you can work with one company instead of coordinating three. That matters when the timing between trades is what holds up the job.
FAQs – Mr-Glass Construction Service in Sunnyvale
No. We’re an independent Mr-Glass service provider, not affiliated with or authorized by the manufacturer. We work with Mr-Glass products because we know them well, and we source OEM parts when they’re available, but any warranty claim still runs through Mr-Glass directly. Call (888) 426-8719 if you want to talk through what that means for your job.
Yes, whenever they’re available. We order OEM Mr-Glass hinges, seals, and rollers to keep your warranty intact. When OEM parts aren’t available, we use aftermarket equivalents that meet or exceed original specifications and tell you which you’re getting before we order. Call (888) 426-8719 for a free estimate.
Most repairs are a single visit once the parts arrive. Seal replacement and roller or hinge swaps usually finish in a few hours. A full enclosure replacement takes longer because the panels are made to your opening, and we’ll give you the timeline in writing with your price. Call (888) 426-8719 to schedule.
We cover all four families: Elite frameless shower enclosures, ProSeries semi-frameless sliding doors, Custom Mirror & Glass interior partitions, and VinoSeries glass railing systems. That includes new installs, replacements, and repairs across each line. Call (888) 426-8719 to confirm your model.
Not if it’s done correctly. Warranty-safe work means using OEM parts where they’re available, respecting the manufacturer’s clearances, and not drilling or torquing panels in ways that void coverage. We document what we find and what we install. Call (888) 426-8719 for a free estimate.
Walk-in shower installations with a Mr-Glass enclosure typically run $4,500 – $12,000, tub-to-shower conversions $3,500 – $10,000, and a shower replacement $3,000 – $8,500. A full bathroom remodel with a Mr-Glass enclosure runs $9,000 – $28,000, and a small bathroom remodel $5,000 – $12,000. The number depends on the enclosure line, panel size, glass thickness, and whether the wall behind it needs work. Call (888) 426-8719 for an exact quote. Estimates are free.
| Service | Typical Range in Sunnyvale |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
Book Your Mr-Glass Service in Sunnyvale, CA
Whether it’s a leaking Elite enclosure, a ProSeries door that won’t slide, or a new Mr-Glass install as part of a bathroom remodel, we’ll give you a written price before any work starts. Call (888) 426-8719 for a free estimate. A live person answers, every time.
Written by the team at Penhallow Remodeling Sunnyvale.












