







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Walk-In Shower Installation Cost in Sunnyvale?
Walk-in shower installation in Sunnyvale typically costs $4,500 to $12,000, with most homeowners landing around $7,200 for a curbless tile shower with a frameless glass panel. That range covers a standard 36×60 alcove conversion with new waterproofing, tile, drain and glass; larger walk-in layouts, custom tile work and bench seating push toward the top of it. The written price you get before demo day is the price on the invoice, and we’ll explain exactly what moves the number up or down before anyone shows up with a hammer.
Key takeaways:
- Most Sunnyvale walk-in shower projects land between $7,000 and $9,500.
- Tile and glass choices are the two biggest levers on cost.
- Waterproofing (the membrane behind the tile) is where cheap jobs quietly fail. We don’t cut it.
- Free estimate, written price before work begins, 365-Day Done Right Promise on every job.

Walk-In Shower Installation Cost Breakdown (2026)
Here’s how a walk-in shower install in Sunnyvale breaks down by line item. These are installed prices for the Sunnyvale market as of 2026, not ballpark guesses. Your written estimate will list each of these out so you can see where the money goes.
| Line Item | Typical $ Range |
|---|---|
| Demo & haul-away of existing tub or shower | $400 – $900 |
| Rough plumbing (drain relocation, valve, curb) | $700 – $2,200 |
| Waterproofing & cement board substrate (the moisture-resistant layer behind tile) | $600 – $1,400 |
| Tile & installation (walls and floor) | $1,200 – $3,500 |
| Frameless glass enclosure | $900 – $2,800 |
| Kohler or Moen fixtures (showerhead, valve, drain) | $350 – $1,100 |
| Bench, niche or grab bar add-ons | $250 – $1,200 |
| Permit and inspection (as required) | $150 – $450 |
So what moves the total up or down? Glass is a big one. A single fixed panel runs less than a pivoting-door enclosure, and 3/8″ glass costs less than 1/2″ heavy glass. Tile matters too: a porcelain 12×24 wall tile installs faster and cheaper than a mosaic or a slab-cut stone. Layout drives plumbing cost: a curbless design (where the floor is recessed to the drain instead of a raised curb) needs the floor dropped or a linear drain installed, and that’s real framing and plumbing labor. Kohler and Moen fixtures are our standard because they carry their own manufacturer warranties alongside our 365-Day Done Right Promise, and if a valve cartridge fails you’re covered twice over.
What Affects Walk-In Shower Installation Pricing in Sunnyvale
Sunnyvale is not a generic market, and pricing here reflects some things you won’t read on a national cost guide. Here’s what actually moves the number in this city.
- Older housing stock in the core neighborhoods. Homes in Old Sunnyvale, Heritage District and downtown frequently date to the 1940s – 1960s. That means galvanized or aging copper supply lines, sometimes a cast-iron drain, and framing that needs a look before we set a curb. If the drain has to be re-piped, that adds $400 – $1,200 to the project. We find it at demo, not after the fact, and the written price we hand you covers the standard rework.
- Permit and inspection requirements. Sunnyvale requires a plumbing permit for drain relocation and often an inspection for shower valve replacements. Permit costs here run $150 – $450 depending on scope. A contractor who skips the permit saves you a few hundred up front and hands you a problem at resale.
- Tile and glass selections. This is where a $4,500 install and a $11,000 install have the same labor. A porcelain field tile keeps the budget in check; a mosaic accent wall, a slab-cut marble niche or a 1/2″ frameless heavy glass door adds real dollars.
- Curbless vs. curbed layouts. A standard curbed shower is the straightforward path. A curbless (zero-threshold) design is beautiful and accessible, but requires either a recessed floor or a linear drain, which adds framing and waterproofing labor, typically $800 – $2,000 more.
- Waterproofing system and substrate. California’s dry summers and wet winters are easy on tile, but a shower fails from the inside out when the waterproofing is done cheaply. A full cement board substrate with a bonded membrane (or a surface-applied system) costs more than greenboard with a paint-on sealer, and it’s the difference between a shower that lasts and one that grows mold in five years. We don’t do the latter.
- Access and logistics. A second-floor bathroom with tight stair turns means more labor hours for glass and material handling than a ground-floor primary bath. Townhomes in the newer developments near Fair Oaks and Lawrence Expressway often have tight interior stairwells; that gets estimated, not discovered for you on install day.

How to Save on Walk-In Shower Installation
You don’t have to chase the lowest bid to keep this project in budget. A few decisions pay off.
- Keep the drain where it is. Moving the drain is one of the pricier line items. If your layout lets us keep the existing drain location, you save $400 – $1,200 of rough plumbing.
- Choose a curbed design over curbless. A clean, tiled curb looks great and costs $800 – $2,000 less than a zero-threshold build. If accessibility is the goal, we’ll talk through grab bars and a low curb as a middle path.
- Pick porcelain wall tile over mosaic or stone. Porcelain 12×24 is fast to install, easy to clean, and keeps tile labor down. Save the accent budget for one niche or a single feature wall.
- Bundle with other bathroom work. A vanity installation or a full bathroom remodel alongside the shower spreads demo and permit costs. Our Sunnyvale service area team quotes bundled projects in one written estimate.
- Ask for a written price, not a range. “Ballpark” is how budgets get destroyed. Every Penhallow homeowner gets a written number before work starts, free of charge. Call (888) 426-8719 for a free estimate and we’ll walk the space with you.
Walk-In Shower vs. Other Bathroom Projects: What Costs What
If you’re weighing a walk-in shower against other bathroom upgrades, here’s how the projects compare in the Sunnyvale market. A walk-in shower install runs $4,500 – $12,000; a tub-to-shower conversion, where we remove a tub and build a shower in its footprint, runs $3,500 – $10,000; a straight shower replacement, swapping one for another, runs $3,000 – $8,500. A full bathroom remodel, which includes the shower plus flooring, vanity, lighting and paint, starts at $9,000 and can reach $28,000 depending on size and finishes. A small bathroom remodel covers the essentials for $5,000 – $12,000, and a standalone vanity installation runs $800 – $3,000.
Most homeowners who call us start with the walk-in shower and end up adding a vanity or a flooring upgrade while the room is torn open. That’s a sensible way to spend: opening walls once is cheaper than opening them twice.
What the 365-Day Done Right Promise Covers on a Shower Install
Here’s the promise in plain terms. If anything we installed fails inside 365 days, we come back and fix it at no charge. Not a phone tag, not a “we’ll get to it” – a real return visit, at no charge.
What that actually covers on a shower: a leak at the drain, a tile that pops or cracks, a valve that won’t hold temperature, a glass panel that shifts out of alignment, a showerhead that dribbles. We backup-test the shower pan during install and we photograph the waterproofing before tile goes up, so if something fails we know exactly what’s behind the wall. Our technicians have up to 22 years of experience, are background-checked and arrive in uniform, so you know who’s walking through your home. Every job gets a defined arrival window, which we give you in writing, and a clean job site at the end.
The Promise runs alongside the manufacturer warranties on your Kohler or Moen fixtures and on the glass and tile. We give you the manufacturer paperwork at closeout so you have the layers of coverage in your file. Every project also carries a written guarantee on the repair, included with the job, and if a repair fails we’ll make a second visit free of charge – no service call fee, no re-inspection fee.
Why Sunnyvale Homeowners Choose Penhallow
We’re part of the Kingswell family of companies, operating to The Kingswell Way since 2004: say the price before the work, show up in the window we gave, leave the place cleaner than we found it. Each location is independently owned and operated, and we take that seriously. A live person answers our phone 24/7 – not a voicemail maze, not a callback window. When you call (888) 426-8719, a real person picks up.
Our materials come from brands that stand behind their products: Kohler and Moen fixtures, Cambria and Silestone countertops (a shower-to-vanity upgrade we handle often), KraftMaid and Wellborn cabinetry. If your walk-in shower project opens into a bigger remodel, those same trade brands carry through the whole job. You can see what else we do on our home page.
A word on safety: a walk-in shower install involves plumbing modifications inside a wall and, in a curbless build, floor framing and recessed waterproofing. This is not a weekend project for a homeowner with a tile saw. A failed waterproofing membrane or a mis-set drain pan will rot framing and grow mold before you see a single sign of it. Hire a licensed professional, and get the waterproofing details in writing. That’s the standard we hold ourselves to.
FAQs – Walk-In Shower Installation Cost
How much does walk-in shower installation cost in Sunnyvale?
Walk-in shower installation in Sunnyvale runs $4,500 to $12,000, with a typical project around $7,200 for a curbless tile shower with frameless glass. The low end reflects a compact alcove with standard tile and a single fixed glass panel; the high end reflects a large custom tile layout, heavy glass and a bench or niche. Call (888) 426-8719 for an exact quote, free.
Is it cheaper to convert a tub to a shower or install a walk-in shower?
A tub-to-shower conversion costs less, $3,500 to $10,000, because the drain and rough plumbing already exist in the tub footprint. A walk-in shower install at $4,500 to $12,000 can cost more because a curbless or relocated-drain layout adds plumbing and framing labor. If your goal is a shower in the same footprint, conversion is the budget-friendly path. Call us and we’ll tell you which one your bathroom actually supports.
Do I need a permit for a walk-in shower in Sunnyvale?
Most walk-in shower installs require a plumbing permit, and drain relocations always do. Permit costs run $150 to $450 in Sunnyvale and we handle the paperwork and inspection as part of the written estimate. Skipping the permit can surface as a problem during a future home sale. Call (888) 426-8719 and we’ll confirm what your specific project needs.
How long does a walk-in shower install take?
A standard install takes 5 to 10 working days from demo to final glass, and a large custom-tile build runs 10 to 14 days. Tile setting and cure time are the long poles, not demo. We give you a written arrival window and a schedule up front, and the same crew sees the job through. Call (888) 426-8719 to book an on-site estimate.
What does the 365-Day Done Right Promise include?
Everything we install, for 365 days, at no charge for repairs. If a drain leaks, a tile cracks or a valve won’t hold temperature, we come back and fix it free of charge with no service call fee. The Promise is written into every project alongside Kohler and Moen manufacturer warranties on your fixtures. Call (888) 426-8719 to talk through the details.
Get a Written Walk-In Shower Price for Your Sunnyvale Home
If you’ve been burned by a verbal estimate that grew on demo day, this is the part that matters: we hand you a written price before any work starts, and we stick to it. Our walk-in shower installs in Sunnyvale run $4,500 – $12,000, backed by the 365-Day Done Right Promise, background-checked technicians, and a live person on the phone any hour of the day. Call (888) 426-8719 for a free estimate and we’ll walk your bathroom, talk through tile and glass options, and put a real number in writing before a single tile gets set.
Written by the team at Penhallow Remodeling.
Pricing reflects the Sunnyvale market as of 2026. Penhallow Remodeling Sunnyvale offers free estimates – call (888) 426-8719.
How Much Does Walk-In Shower Installation Cost in Sunnyvale?
Walk-in shower installation in Sunnyvale typically costs $4,500 to $12,000, with most homeowners landing around $7,200 for a curbless tile shower with a frameless glass panel. That range covers a standard 36×60 alcove conversion with new waterproofing, tile, drain and glass; larger walk-in layouts, custom tile work and bench seating push toward the top of it. The written price you get before demo day is the price on the invoice, and we’ll explain exactly what moves the number up or down before anyone shows up with a hammer.
Key takeaways:
- Most Sunnyvale walk-in shower projects land between $7,000 and $9,500.
- Tile and glass choices are the two biggest levers on cost.
- Waterproofing (the membrane behind the tile) is where cheap jobs quietly fail. We don’t cut it.
- Free estimate, written price before work begins, 365-Day Done Right Promise on every job.
Walk-In Shower Installation Cost Breakdown (2026)
Here’s how a walk-in shower install in Sunnyvale breaks down by line item. These are installed prices for the Sunnyvale market as of 2026, not ballpark guesses. Your written estimate will list each of these out so you can see where the money goes.
| Line Item | Typical $ Range |
|---|---|
| Demo & haul-away of existing tub or shower | $400 – $900 |
| Rough plumbing (drain relocation, valve, curb) | $700 – $2,200 |
| Waterproofing & cement board substrate (the moisture-resistant layer behind tile) | $600 – $1,400 |
| Tile & installation (walls and floor) | $1,200 – $3,500 |
| Frameless glass enclosure | $900 – $2,800 |
| Kohler or Moen fixtures (showerhead, valve, drain) | $350 – $1,100 |
| Bench, niche or grab bar add-ons | $250 – $1,200 |
| Permit and inspection (as required) | $150 – $450 |
So what moves the total up or down? Glass is a big one. A single fixed panel runs less than a pivoting-door enclosure, and 3/8″ glass costs less than 1/2″ heavy glass. Tile matters too: a porcelain 12×24 wall tile installs faster and cheaper than a mosaic or a slab-cut stone. Layout drives plumbing cost: a curbless design (where the floor is recessed to the drain instead of a raised curb) needs the floor dropped or a linear drain installed, and that’s real framing and plumbing labor. Kohler and Moen fixtures are our standard because they carry their own manufacturer warranties alongside our 365-Day Done Right Promise, and if a valve cartridge fails you’re covered twice over.
What Affects Walk-In Shower Installation Pricing in Sunnyvale
Sunnyvale is not a generic market, and pricing here reflects some things you won’t read on a national cost guide. Here’s what actually moves the number in this city.
- Older housing stock in the core neighborhoods. Homes in Old Sunnyvale, Heritage District and downtown frequently date to the 1940s – 1960s. That means galvanized or aging copper supply lines, sometimes a cast-iron drain, and framing that needs a look before we set a curb. If the drain has to be re-piped, that adds $400 – $1,200 to the project. We find it at demo, not after the fact, and the written price we hand you covers the standard rework.
- Permit and inspection requirements. Sunnyvale requires a plumbing permit for drain relocation and often an inspection for shower valve replacements. Permit costs here run $150 – $450 depending on scope. A contractor who skips the permit saves you a few hundred up front and hands you a problem at resale.
- Tile and glass selections. This is where a $4,500 install and an $11,000 install have the same labor. A porcelain field tile keeps the budget in check; a mosaic accent wall, a slab-cut marble niche or a 1/2″ frameless heavy glass door adds real dollars.
- Curbless vs. curbed layouts. A standard curbed shower is the straightforward path. A curbless (zero-threshold) design is beautiful and accessible, but requires either a recessed floor or a linear drain, which adds framing and waterproofing labor, typically $800 – $2,000 more.
- Waterproofing system and substrate. California’s dry summers and wet winters are easy on tile, but a shower fails from the inside out when the waterproofing is done cheaply. A full cement board substrate with a bonded membrane (or a surface-applied system) costs more than greenboard with a paint-on sealer, and it’s the difference between a shower that lasts and one that grows mold in five years. We don’t do the latter.
- Access and logistics. A second-floor bathroom with tight stair turns means more labor hours for glass and material handling than a ground-floor primary bath. Townhomes in the newer developments near Fair Oaks and Lawrence Expressway often have tight interior stairwells; that gets estimated, not discovered for you on install day.
How to Save on Walk-In Shower Installation
You don’t have to chase the lowest bid to keep this project in budget. A few decisions pay off.
- Keep the drain where it is. Moving the drain is one of the pricier line items. If your layout lets us keep the existing drain location, you save $400 – $1,200 of rough plumbing.
- Choose a curbed design over curbless. A clean, tiled curb looks great and costs $800 – $2,000 less than a zero-threshold build. If accessibility is the goal, we’ll talk through grab bars and a low curb as a middle path.
- Pick porcelain wall tile over mosaic or stone. Porcelain 12×24 is fast to install, easy to clean, and keeps tile labor down. Save the accent budget for one niche or a single feature wall.
- Bundle with other bathroom work. A vanity installation or a full bathroom remodel alongside the shower spreads demo and permit costs. Our Sunnyvale service area team quotes bundled projects in one written estimate.
- Ask for a written price, not a range. “Ballpark” is how budgets get destroyed. Every Penhallow homeowner gets a written number before work starts, free of charge. Call (888) 426-8719 for a free estimate and we’ll walk the space with you.
Walk-In Shower vs. Other Bathroom Projects: What Costs What
If you’re weighing a walk-in shower against other bathroom upgrades, here’s how the projects compare in the Sunnyvale market. A walk-in shower install runs $4,500 – $12,000; a tub-to-shower conversion, where we remove a tub and build a shower in its footprint, runs $3,500 – $10,000; a straight shower replacement, swapping one for another, runs $3,000 – $8,500. A full bathroom remodel, which includes the shower plus flooring, vanity, lighting and paint, starts at $9,000 and can reach $28,000 depending on size and finishes. A small bathroom remodel covers the essentials for $5,000 – $12,000, and a standalone vanity installation runs $800 – $3,000.
Most homeowners who call us start with the walk-in shower and end up adding a vanity or a flooring upgrade while the room is torn open. That’s a sensible way to spend: opening walls once is cheaper than opening them twice.
What the 365-Day Done Right Promise Covers on a Shower Install
Here’s the promise in plain terms. If anything we installed fails inside 365 days, we come back and fix it at no charge. Not a phone tag, not a “we’ll get to it” – a real return visit, at no charge.
What that actually covers on a shower: a leak at the drain, a tile that pops or cracks, a valve that won’t hold temperature, a glass panel that shifts out of alignment, a showerhead that dribbles. We backup-test the shower pan during install and we photograph the waterproofing before tile goes up, so if something fails we know exactly what’s behind the wall. Our technicians have up to 22 years of experience, are background-checked and arrive in uniform, so you know who’s walking through your home. Every job gets a defined arrival window, which we give you in writing, and a clean job site at the end.
The Promise runs alongside the manufacturer warranties on your Kohler or Moen fixtures and on the glass and tile. We give you the manufacturer paperwork at closeout so you have the layers of coverage in your file. Every project also carries a written guarantee on the repair, included with the job, and if a repair fails we’ll make a second visit free of charge – no service call fee, no re-inspection fee.
Why Sunnyvale Homeowners Choose Penhallow
We’re part of the Kingswell family of companies, operating to The Kingswell Way since 2004: say the price before the work, show up in the window we gave, leave the place cleaner than we found it. Each location is independently owned and operated, and we take that seriously. A live person answers our phone 24/7 – not a voicemail maze, not a callback window. When you call (888) 426-8719, a real person picks up.
Our materials come from brands that stand behind their products: Kohler and Moen fixtures, Cambria and Silestone countertops (a shower-to-vanity upgrade we handle often), KraftMaid and Wellborn cabinetry. If your walk-in shower project opens into a bigger remodel, those same trade brands carry through the whole job. You can see what else we do on our home page.
A word on safety: a walk-in shower install involves plumbing modifications inside a wall and, in a curbless build, floor framing and recessed waterproofing. This is not a weekend project for a homeowner with a tile saw. A failed waterproofing membrane or a mis-set drain pan will rot framing and grow mold before you see a single sign of it. Hire a licensed professional, and get the waterproofing details in writing. That’s the standard we hold ourselves to.
FAQs – Walk-In Shower Installation Cost
How much does walk-in shower installation cost in Sunnyvale?
Walk-in shower installation in Sunnyvale runs $4,500 to $12,000, with a typical project around $7,200 for a curbless tile shower with frameless glass. The low end reflects a compact alcove with standard tile and a single fixed glass panel; the high end reflects a large custom tile layout, heavy glass and a bench or niche. Call (888) 426-8719 for an exact quote, free.
Is it cheaper to convert a tub to a shower or install a walk-in shower?
A tub-to-shower conversion costs less, $3,500 to $10,000, because the drain and rough plumbing already exist in the tub footprint. A walk-in shower install at $4,500 to $12,000 can cost more because a curbless or relocated-drain layout adds plumbing and framing labor. If your goal is a shower in the same footprint, conversion is the budget-friendly path. Call us and we’ll tell you which one your bathroom actually supports.
Do I need a permit for a walk-in shower in Sunnyvale?
Most walk-in shower installs require a plumbing permit, and drain relocations always do. Permit costs run $150 to $450 in Sunnyvale and we handle the paperwork and inspection as part of the written estimate. Skipping the permit can surface as a problem during a future home sale. Call (888) 426-8719 and we’ll confirm what your specific project needs.
How long does a walk-in shower install take?
A standard install takes 5 to 10 working days from demo to final glass, and a large custom-tile build runs 10 to 14 days. Tile setting and cure time are the long poles, not demo. We give you a written arrival window and a schedule up front, and the same crew sees the job through. Call (888) 426-8719 to book an on-site estimate.
What does the 365-Day Done Right Promise include?
Everything we install, for 365 days, at no charge for repairs. If a drain leaks, a tile cracks or a valve won’t hold temperature, we come back and fix it free of charge with no service call fee. The Promise is written into every project alongside Kohler and Moen manufacturer warranties on your fixtures. Call (888) 426-8719 to talk through the details.
Get a Written Walk-In Shower Price for Your Sunnyvale Home
If you’ve been burned by a verbal estimate that grew on demo day, this is the part that matters: we hand you a written price before any work starts, and we stick to it. Our walk-in shower installs in Sunnyvale run $4,500 – $12,000, backed by the 365-Day Done Right Promise, background-checked technicians, and a live person on the phone any hour of the day. Call (888) 426-8719 for a free estimate and we’ll walk your bathroom, talk through tile and glass options, and put a real number in writing before a single tile gets set.
Written by the team at Penhallow Remodeling.
Pricing reflects the Sunnyvale market as of 2026. Penhallow Remodeling Sunnyvale offers free estimates – call (888) 426-8719.
What Our Customers Say
"Primary bath remodel. They gave me a schedule and hit it, called me for every decision, and kept the dust contained with plastic. Beautiful tile work."
- Dana Monroe"Did our whole kitchen. The written estimate held, which after reading remodel nightmares online I did not take for granted. Showed up every morning on time and the crew was clean and polite."
- Warren Updike"Good remodel of two bathrooms. A fixture came in wrong and added a few days, but they ate the cost of fixing it. Finish work is excellent and they cleaned up daily."
- Rudy Mackey












