







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable General Contractor Across Union City
If you own a home in Union City, you’re building on ground that asks more of a contractor than most of the Bay Area does. The Hayward Fault runs through here, the hillside lots above the flats trigger slope-stability review, and the fog belt on the bay plain chews through wood and hardware that holds up fine ten miles inland. We plan for all three before anyone swings a hammer. To price your project, call (888) 426-8719 and we’ll write the number down before work starts.

Why Penhallow Remodeling Sunnyvale Is Union City’s Preferred General Contractor Company

We get calls from Union City homeowners who’ve already been through one bad remodel. The story is usually the same: a verbal estimate, a price that grew after demo day, and a crew that vanished when something cracked. We answer that with a written price before any work begins and the 365-Day Done Right Promise, backed in writing on every project. If the work fails inside the guarantee period, we come back and fix it at no charge.
Union City rewards local knowledge in ways homeowners don’t always expect. Because we know what the city’s building division asks for on fault-zone and hillside submittals, plan-check stops being a black box. Our technicians have up to 22 years of experience, arrive in uniform, and are background-checked before they set foot in your home. A live person answers the phone around the clock, so a question on a Tuesday night doesn’t wait until Thursday.
We also serve the neighborhoods around Kennedy Park and the older streets off Alvarado-Niles Road, and we know which of those homes have already been retrofitted and which are still sitting on original cripple walls. That matters when a simple kitchen remodel turns up a load-bearing surprise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
General Contractor Services in Union City
General Contractor Services in Union City start with the same question: what does your lot require that a flat-lot job in Fremont wouldn’t? On the bay plain, it’s usually rot repair and re-flashing; up the hills, it’s drainage and slope documentation. A full kitchen remodel runs $14,000 – $45,000 in this market, a small kitchen $9,000 – $20,000, and a bathroom remodel $9,000 – $28,000. We hand you that number in writing before any cabinet comes out.
Scope and Sequencing
Every project gets a written scope with allowances spelled out, so a hidden soft spot in the subfloor becomes a written revision rather than a fight at the end. We sequence trades so inspections land when they should and the job site stays clean between visits.
Fault-Zone and Hillside Paperwork
Lots near the fault trace or on steeper hillside grades need geotech and slope-stability documentation submitted up front. Knowing exactly what the city wants before the first submittal is often the difference between a smooth plan-check and weeks of resubmittals.
Construction Company in Union City
A Construction Company in Union City works against a stricter paperwork backdrop than most of the metro, and that’s where timelines are actually won or lost. Roof replacement here runs $8,000 – $20,000, window replacement $4,500 – $15,000, a home addition $45,000 – $130,000, and an ADU $90,000 – $220,000. Those ranges hold whether you’re on the flats or up in the eastern hills.
Additions and ADUs
An addition or ADU on a hillside lot brings grading, drainage and footing details that a flat-lot build skips. We work the geotech requirements into the plan early rather than discovering them at plan-check.
Roofing, Windows and Envelope Work
Fog-driven moisture on the flats and wind exposure up the hills call for different weatherproofing details. We specify materials that suit the exposure on your particular lot, then back the install with a written guarantee.

Trusted Brands We Service in Union City
We install roofing and envelope products from names homeowners recognize, including CertainTeed, Owens Corning and James Hardie, and we don’t keep a local parts warehouse; materials are ordered to your project rather than pulled off a shelf. That keeps turnaround tight and means you get the spec that fits your lot, not whatever happened to be in stock. When a brand carries its own manufacturer warranty, that layers on top of our written guarantee, so you’re covered twice over.
See the difference
Before
After
Before
After
Before
AfterCommon General Contractor Problems We See in Union City Homes
- Out-of-town plan-check stalls. Crews submit hillside or fault-trace jobs without the geotech and slope documentation the city expects, then burn weeks on resubmittals. Local familiarity with the building division’s requirements keeps a project moving.
- Fog-belt rot under paint. On mid-century ranch homes near the bay plain, fascia and window frames soften where moisture sits against original wood. The fix is cutting out and replacing the rot and re-detailing the flashing, not painting over it.
- Inland-spec hardware on coastal lots. Standard steel fasteners, untreated fence posts and unsealed paver joints start failing within a decade. The apparent savings come back as a second project.
- Verbal allowances in older 94587 homes. Hidden dry-rot or a load-bearing surprise mid-remodel turns into a change-order argument when the scope was never written down. We put it in writing first.
Pricing for General Contractor in Union City, CA
We give real numbers because vague pricing wastes your time. Here’s what Union City projects typically run in this market:
| Project | Typical Union City Range |
|---|---|
| Roof Replacement | $8,000 – $20,000 |
| Window Replacement | $4,500 – $15,000 |
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Bathroom Remodel | $9,000 – $28,000 |
What moves a number up or down: the grade of your lot, how much rot the demo uncovers, the window frame material you choose, and whether the project needs fault-zone or slope documentation. A coastal-spec version with hot-dip or stainless hardware and sealed joints costs more up front than the inland-spec version, and costs less within a decade. Every homeowner receives a written price before work starts, so the number on day one is the number on the invoice. Call (888) 426-8719 for a free estimate.
We Also Serve Cities Near Union City
We work across the surrounding East Bay as well, including General Contractor in Union City-area neighbors in Fremont, Pleasanton, Dublin and San Ramon. Each city brings its own permit office and its own exposure conditions, and we treat them that way. If you’re near Union City and want a written number, call us and we’ll talk through your lot.
Serving Union City, CA – Our Local Coverage Area
We serve Union City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About General Contractor in Union City
Fog-driven moisture on the bay plain sits against wood and steel hardware longer each day than dry inland air does, so untreated posts, standard steel fasteners and unsealed joints break down faster. We specify hot-dip or stainless hardware, sealed joints and properly flashed details to match the exposure. Call (888) 426-8719 for a quote on your Union City home.
A hillside lot adds geotech and slope-stability documentation that flat-lot jobs don’t require, on top of the city’s own building division review and any Alquist-Priolo fault-zone screening. Getting that packet right before the first submittal is what keeps the timeline honest. Call (888) 426-8719 to walk through your lot’s requirements.
The gap usually shows up in hardware and finish: stainless or hot-dip fasteners, marine-grade finishes and sealed paver joints add cost up front over standard steel and untreated posts. That difference is modest compared with redoing the same work within a decade. Call (888) 426-8719 for a written side-by-side.
Older homes near ZIP 94587 hide dry-rot and load-bearing surprises behind the walls, and a verbal allowance turns every one of them into a change-order argument. A written scope with line-item allowances means surprises become written revisions you approve. Call (888) 426-8719 for a written scope and price.
Yes. Kitchen and bathroom remodels here generally require permits, and inspection sign-off confirms the work inside your walls meets code before it gets closed up. The permit is a third-party check on the rough-in, not a rubber stamp. Call (888) 426-8719 and we’ll handle the permitting for your Union City project.
Ready to put a written number and a written guarantee in front of your Union City project? Call Penhallow Remodeling Sunnyvale at (888) 426-8719 for a free estimate. Estimates are free, the price comes in writing, and every job carries the 365-Day Done Right Promise.
Written by the team at Penhallow Remodeling Sunnyvale.











