







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
James Hardie Driveway & Pavers: The Sunnyvale Owner’s Guide
James Hardie doesn’t manufacture driveway pavers or hardscape surfaces – the brand is fiber cement siding, trim, and backing. What Sunnyvale homeowners actually call about is the driveway and paver work that sits against a James Hardie-sided home, plus the fiber cement trim and edge pieces that frame walks and car pads. On a Sunnyvale lot, a paver driveway runs $7,000 – $18,000 installed, and a concrete driveway replacement $4,500 – $12,000, with most projects scheduled inside a two-to-three-week window once the written price is signed.
Owners usually find the problem the same way: a trim board along the driveway edge is soft to the touch, paint is flaking off in paint-chip-sized sheets, or a paver course has dropped just enough that the car tire catches it every morning. We’re an independent contractor, not affiliated with James Hardie, and we’ll say plainly on the first visit whether the fiber cement is failing, the pavers are settling, or both.
Which James Hardie Models This Applies To

James Hardie fiber cement shows up on Sunnyvale driveways in predictable places: the skirt board where siding meets the paved apron, the trim band on a garage face, and the fascia return that overhangs the drive. If you’re identifying a piece to match, look for the HardiePlank or HardiePanel stamp on the back of a loose board, or measure thickness and reveal – 5/16-inch siding and 3/4-inch trim are the two common profiles, and they don’t interchange. A HardiePanel square-cut edge behaves differently against a paver soldier course than a HardiePlank lap siding does, and ordering the wrong one means a return trip and a visible seam.
Here’s the decision that actually matters on a Sunnyvale home: OEM James Hardie versus a quality fiber cement equivalent. Hardie’s advantage is the cured edge and its resistance to the moisture cycling that Sunnyvale sees through the rain season – October to April, roughly 15 inches a year landing on driveways and paver joints. A cheap fiber cement alternative will wick and craze within a few years in that cycle. On pavers themselves the “brand” question is Belgard versus Unilock versus stock cast pavers, and the compatibility gotcha is base thickness: Sunnyvale permit work generally wants 4 inches of compacted Class II base under a driveway where a car parks, 6 where a loaded truck turns, and we check your existing base before we quote so the number doesn’t move after demolition.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your James Hardie Driveway & Pavers Is Failing
- Soft or crumbly fiber cement near grade. Moisture wicks up through the paver joint and reaches the bottom inch of the skirt. In Sunnyvale we see this on the shaded north side of driveways first, where the ground stays damp into May.
- Paint flaking in flat sheets rather than peeling chips. Fiber cement that’s moisture-saturated releases its coating differently than wood. Flat-sheet flaking usually means the substrate, not the paint, is the problem.
- Pavers rocking or a sunken course. Base compaction has failed, or tree roots from a nearby redwood or Chinese elm have heaved the bedding layer. One rocking paver becomes a broken paver within a season.
- Widening joints and weeds between pavers. Joint sand has washed out, which lets water into the base. On a driveway pitch steeper than about 5%, this happens faster than most owners expect.
- Visible cracking in the concrete apron under the garage door. The slab is deflecting, often from inadequate thickness or missing control joints. Left alone, the crack migrates under the door and the door seals leak.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Our guide prices for this work in Sunnyvale:
- Paver driveway installation: $7,000 – $18,000
- Concrete driveway installation: $4,500 – $12,000
- Driveway replacement (tear-out included): $5,000 – $14,000
- Paver patio installation: $3,500 – $11,000
- Driveway sealing: $250 – $700
What drives the number up: existing base demolition, a paver pattern with more cut pieces, drainage correction, or a driveway that requires a Sunnyvale grading permit. Every job gets a written line-item price before work starts – the number on day one is the number on the invoice, not a range that creeps after demo. Labor and materials are itemized separately, so you can see what the fiber cement trim costs versus what the paver base and set install costs. Every project carries a written guarantee, and our 365-Day Done Right Promise means if the fiber cement softens or a paver course drops inside the year, we come back and fix it at no charge.
DIY or Call Us?
You can safely check fiber cement by pressing a screwdriver into the bottom inch of a base board – if it sinks, the substrate is done. You can also sweep joint sand in on an annual basis and reseal every two to three years. Where DIY goes wrong: replacing the fiber cement trim yourself means matching the reveal to the adjacent siding course and painting the cut edges before install, which most owners get right on the first board and wrong on the fifth. Pavers are worse – improper base compaction shows up two winters later, and by then it’s a full re-do. Call us at (888) 426-8719 for a written estimate; it’s free, and it’s the fastest way to know what you’re actually looking at.
FAQs

James Hardie’s own literature puts the product at 30 years with proper installation and paint maintenance. In Sunnyvale’s rain season, the real failure point is not the board, it’s the bottom inch where it meets the paver joint – keep a 1-inch clearance to grade and it lasts the full span.
Yes, on both fronts. A single failed trim board can be swapped without disturbing the siding course above, and a sunken paver course can often be reset if the underlying base is sound. Our written quote tells you which path we recommend and why.
A trim board replacement runs a half-day, and a paver driveway install runs two to four days weather permitting. The written price includes the schedule, and we give you a defined arrival window on the day. If the repair fails, the return visit is covered and there’s no service call fee.
We source through trade distributors to match your existing profile and thickness, so the new board reads the same as the one next to it. We don’t claim warehouse stock and we’re not affiliated with James Hardie – but as a general contractor we coordinate the order and the install on one written price, and the products we install (James Hardie fiber cement, Belgard and Unilock pavers, alongside KraftMaid, Cambria and Silestone on interior work) come with their own manufacturer warranties on top of ours.
Call (888) 426-8719 for a free estimate. A live person answers around the clock, and every job gets a written price before work starts under the Kingswell Guarantee – established in 2004, backed by background-checked, uniformed technicians and a written 365-Day Done Right Promise.
Written by the team at Penhallow Remodeling Sunnyvale, serving Sunnyvale and nearby areas.












