A Penhallow company - serving Sunnyvale, CA
A new rear addition with a vaulted beamed ceiling and tall windows
Dvele · Sunnyvale

Dvele Home Additions & ADU in Sunnyvale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Sunnyvale
A single-story rear room addition with tall windows and a new patio
A second-story addition that matches the existing roofline
A finished basement family room with a media wall and wet bar
A walk-in pantry with wood shelving
A powder room with botanical wallpaper and a stone sink
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Dvele Home Additions & ADU: The Sunnyvale Owner’s Guide

We build and finish Dvele-compatible home additions and accessory dwelling units for Sunnyvale homeowners, and the all-in installed range typically runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU, depending on square footage, foundation type, and finish level. No two of these projects follow the same calendar – a permitted addition in Sunnyvale usually takes months, not days, and we tell you the realistic window up front. Most owners don’t land on this page because a part “broke.” They land here because a Dvele module or room addition they bought into has a specific failing component – a wall panel joint that’s opening, a window that won’t seat right, a foundation anchor that’s backed out – and they need to know what it is, what it costs to fix, and who to call.

Call (888) 426-8719

Key Takeaways

  • Dvele factory-built wall and roof sections are engineered to tight tolerances; the part that fails first is usually the connection or the seal, not the structural panel itself.
  • Installed pricing for an addition in Sunnyvale starts around $45,000 and reaches $130,000; a detached ADU runs $90,000 – $220,000.
  • We’re an independent remodeling contractor, not affiliated with Dvele. We’ll tell you plainly whether your issue is a factory part, a site-installation problem, or normal settling.
  • You get a written price before work starts and a 365-Day Done Right Promise on the work.

Which Dvele Models This Applies To

A wide opening with a new beam where the kitchen wall was removed

Dvele builds prefabricated homes and additions in a few core panel and module families, and the part you need depends on which one you have. Identifying the right match starts with three things: the label plate on the structural panel (Dvele stamps module and series information on the frame), the rough opening dimensions for any window or door you’re replacing, and the year the module shipped – because Dvele revised its wall-panel connection hardware between production runs, so a connector that fits a 2021 panel may not seat on a 2019 one. Measure, photograph the label, and write down the opening size before you order anything.

Where it gets tricky is the OEM-versus-aftermarket decision. For Dvele-specific connection brackets, panel sealants, and their proprietary flashing profiles, we lean toward OEM or an exact-match equivalent because a generic substitute rarely meets the same tolerance. For standard items – a window sash, a standard door frame, a fastener spec – a recognized aftermarket part works fine and costs less. We’ll tell you which category your part falls into rather than defaulting to the most expensive answer. Penhallow Remodeling Sunnyvale is an independent provider; we’re not affiliated with Dvele, so we source on your behalf rather than as their authorized agent.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Dvele Home Additions & ADU Is Failing

Owners usually notice a room addition problem weeks before it becomes a repair. Here’s what those early signals mean under the surface:

  • A visible gap or daylight at a panel joint. The connection hardware has shifted or the original sealant has aged out, letting moisture and air through. Left alone, that gap moves into the framing.
  • A window or door that sticks or won’t latch. Usually the rough opening has racked slightly from foundation movement or settling, not the window itself. Replacing the window without addressing the frame won’t fix it.
  • Water staining at the base of a wall or on the ceiling near a roof seam. A flashing detail has failed – often where the Dvele roof section meets site-built framing. This is the most common leak point we see.
  • A soft or spongy floor near an exterior wall. Moisture has reached the subfloor through a failed perimeter seal. This one moves fast and should be looked at promptly.
  • Bouncy or uneven flooring in the addition. A foundation anchor or subfloor fastener has backed out. It’s fixable, but it’s a sign the load path needs a look before it gets worse.

If you’re seeing more than one of these, the fix is rarely a single swap. It’s usually a connection-and-seal scope, which we price in writing before we touch anything.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A project lead and homeowner reviewing plans in a room under renovation

What you pay depends on whether we’re repairing a connection, replacing a component, or building out the addition itself. Here are the ranges we quote for Sunnyvale, installed:

  • Home addition (full build): $45,000 – $130,000
  • Detached or attached ADU: $90,000 – $220,000
  • Garage conversion (common ADU path): $30,000 – $80,000
  • Isolated panel-joint, flashing, or seal repair: priced individually – usually a fraction of a full build, and always written down first

The range moves with square footage, foundation type (slab versus raised), finish level, and the permits involved. What stays the same is how we price: a written line-item number before any work starts, so the number on day one is the number on the invoice. We pull permits and pass inspections as part of the scope. Every project is covered by a written guarantee and our 365-Day Done Right Promise – if something we built fails inside the year, we come back and fix it at no charge.

DIY or Call Us?

Some of this you can safely check yourself. Walk the perimeter of the addition and look for gaps or daylight at panel joints. Press along the base of exterior walls for softness. Open and close every window and door to see if any stick. Photograph the Dvele label plate so you have the model information ready. That’s a reasonable evening’s inspection.

What you shouldn’t do is reseal a failing panel joint, re-anchor a foundation connection, or chase a leak at a roof seam on your own. These are structural and moisture-control repairs, and a bad seal lets water into the framing – the most expensive kind of mistake on a prefabricated build. Foundation anchoring and roof-level work carry real risk of injury or long-term damage if done wrong. If your inspection turned up more than a cosmetic issue, call us at (888) 426-8719. We’ll look at it honestly and give you a written price before anything starts.

FAQs

Footing forms with tied rebar for a home addition

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A whole-home remodel with the living, dining and kitchen areas opened upA galley kitchen opened up to the dining room with a new peninsulaA walk-in shower with large-format tile and a built-in nicheA remodeled family room with new windows and a window seatA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled hall bathroom with subway tile and a floating vanity

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Penhallow in Sunnyvale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Sunnyvale team

A local vetted partner works across Sunnyvale and the towns around it, to the same written standard as every Penhallow job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 426-8719
Local Service Coverage

Request a Free Estimate in Sunnyvale

Tell us what you need - Penhallow Remodeling Sunnyvale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch